KIT 24 V electromechanical motor Beninca MARK for built-in residential doors up to 8m2.

The operator has built-in central, receiver and encoder.

Engine Nice TEN electromechanical 24Vdc for overflowing and non-overflowing tilt doors

Motor reducer for doors up to 9m2 and 2,6m high (up to 16 m2 and 2,6m high with the use of 2 motors).

Three versions, standard and powered:

• with integrated central, force regulator and absolute binding (TN2010L);

• with built-in central and receiver and electromechanical career end (TN2030L);

• without central (TN2020L).

24V electromechanical motor for tilting doors two-leaf BFT PHEBE BT A U C with integrated picture for tilting garage doors with Maximum surface 8 m² and intensive use with decreased speed.

Maneuver time 17-20 s, IP20 and End of Electromechanical Race. Control Central Built-in with D-Track

Motor kit Erreka Electromechanical ZEUS with saxophone hardware for tilting doors up to 9m2 residential use with 230-Vac lock and electromechanical end run.

Motor kit Erreka Electromechanical ZEUS for revolving doors up to 9 m2 residential use with 230-Vac lock and electromechanical end run.

Engine Erreka Electromechanical ZEUS for revolving doors up to 9 m2 residential use with 230-Vac lock and electromechanical end run.

Hydraulic motor Medva HB1 for swing doors one or two-bladed counterweights with a not more than 25 m2, for residential, community or industrial use.

Electromechanical engine FAAC 550 for hinged doors up to 12 m2 with the possibility of using a second 'slave' engine.

KIT electric motor for residential use, BFT model"PHEBE BT A U C" for automating swing doors of up to 8m2.

Electromechanical operator for residential use to automate tilting garage doors.

The integrated control centre, allows the operation of a second engine for large doors or with an integrated pedestrian door. For tilting doors up to 10m2 with installation of two motors.

In addition, microprocessor technology allows the torque of the motors to be controlled with maximum precision and complete safety.

Emfa series engines ROT COMODIN SUPER are designed to automate counterweight tilting doors up to 20m2 for intensive use, ideal for large communities.

Motor gearbox PUJOL P-LA for chain drive tilting doors. What. The model P-LA II single phase automates doors of up to 20m2, with mild stopping, suitable for residential or community use. The model P-LA III three-phase, is suitable for doors up to 30m2, for industrial use. Integrated receiver.

Electrically operated motor 230V Medva BASIC H4 for use in the manufacture of motor vehicles residential use from one or two leaves up to 10m2.

Electromechanical engine DEA "LIVI 902' 230V or 24V for semi-intensive residential swing doors up to 9m2.

The 'LIVI 902' version does not incorporate a manoeuvre chart and the 'LIVI 905' version incorporates a digital manoeuvre chart. The engine travel is done by Encoder but optionally you can acquire the end of race system.

KIT Electromechanical engine DEA "LIVI 902 SR' 230V for semi-intensive residential tilting doors up to 9 m2 with built-in analogue box-receiver. What. The KIT can be chosen with Telescopic Gear + Torsion Bar or with Saxo Central Gear.

The engine incorporates mechanical opening-closing stroke ends for more precise adjustment.

Electromechanical engine DEA "LIVI 902 SR' 230V for semi-intensive residential tilting doors up to 9 m2 with built-in analogue box-receiver.

The engine incorporates mechanical opening-closing stroke ends for more precise adjustment.

Hydraulic motor for tilting doors one or two-bladed counterweights with a not more than 14 m2, for residential, community or industrial use.

KIT Chain drive engine Pujol UPPER 24V for residential sliding doors up to 12 m2.

Take it incorporated a receiver maneuver box incorporated at 433 MHz and a TRV connector for connecting 6-pin receiver cards. Optional additions emergency batteries to be able to operate in the event of a power failure.

The UPPER actuator consists of a dc irreversible gearbox very quiet, a painting and a transformer. The movement transmitted by the gearbox motor to the door is effected by chain shot with bolt and guitar that give a constant speed and in its final stretch it changes speed so as not to cause oscillations. They can be mounted on two types of tilting doors; tilting where the bottom sheet opens outwards and for tilting doors where the bottom sheet opens inwards.

Electromechanical engine V2 OTHER for use in the manufacture of motor vehicles residential buildings up to 9 m2.

Hydraulic motor BFT BERMA intensive use at 230V indicated for tilting doors up to 9m2. What. Manufactured to withstand the harshest conditions of use, it combines strength and operator reliability BFT. 

Motor DMIL RAYO 1 electromechanical 230V for residential revolving doors up to 9m2, the manoeuvre chart (DEVELOPMENT) built-in analogue and emitter compatible receiver Forsa 868 MHz.

Emfa series engines ROT COMODIN SUPER are designed to automate counterweight tilting doors up to 14m2 for intensive use, ideal for large communities.

Electromechanical motor BENINCA AU96 for residential use up to 12m2.

Hydraulic motor HYDOM MINIMAX for heavy use thanks to its heat-cooled aluminium tank, for oversized two-bladed swing doors (maximum 14m2). Allows manual opening and closing in the event of a power failure.

Maintenance on this engine is practically zero.

Hydraulic motor HYDOM MINIMAX for semi-intensive use for oversized two-bladed hinged doors (maximum 14m2). Allows manual opening and closing in the event of a power failure.

Maintenance on this engine is practically zero.

Hydraulic motor HYDOM MINIMAX for semi-intensive use for oversized two-bladed hinged doors (maximum 14m2). Allows manual opening and closing in the event of a power failure.

Maintenance on this engine is practically zero.

Hydraulic motor HYDOM MINIMAX for semi-intensive use for oversized two-bladed hinged doors (maximum 14m2). Allows manual opening and closing in the event of a power failure.

Maintenance on this engine is practically zero.

Hydraulic motor Aprimatic LEVA50 intensive use for use in the manufacture of motor vehicles up to 10m2 and MAXILEVA50 for doors up to 16m2.

Hydraulic operator for one- or two-bladed counterweighted swing doors. Torque control valves incorporated. Hydraulic deceleration at the end of the journey. Intensive use. Hollow shaft.

Engine Beninca Electromechanical ZED version 230V or 24V for counterweighted residential swing doors up to 12,5m2 with built-in central and encoder.

Irreversible electromechanical gear motor for residential counterbalance swing doors. Available in 230Vac and 24Vdc versions with or without mains. Courtesy light, race finishes and built-in control buttons.

Motor kit Aprimatic Electrical connections residential tilting doors of up to 10 m2.

Engine Aprimatic Electrical connections residential tilting doors of up to 10 m2.

The ALZO55 engine has a built-in receiver, and 2 TX4E controls are included.

Engine Erreka Sirius electromechanical 230Vac and 400Vac by chain transmission for hinged doors up to 50 m2.

Recommended installation in community and industrial doors.

Hydraulic motor Erreka 230Vac ATLAS for residential or community intensive use for doors up to 15 m2 with an obstacle detection system. Available in reversible or irreversible versions and with anti-lock system.

Hydraulic motor Erreka 230Vac ATLAS for residential or community intensive use for doors up to 15 m2 with an obstacle detection system. Available in reversible or irreversible versions and with anti-lock system.

Hydraulic motor Erreka 230Vac ATLAS for residential or community intensive use for doors up to 15 m2 with an obstacle detection system. Available in reversible or irreversible versions and with anti-lock system.

THE KIT Electromechanical engine Erreka ORION 230Vac for swing doors for use in the manufacture of products falling within heading 8528 [1] encode or end run. What. Can be used with inside opening or outside opening.

Electromechanical engine Erreka ORION 230Vac for swing doors two-bladed counterweight up to 20m2, available with encode or end run. What. Can be used with inside opening or outside opening.

Electromechanical motor of 24 V DC Erreka String draw for use in the manufacture of motor vehicles up to 35m2, for residential, community and industrial use.

KIT 24Vdc electric motor Erreka String draw for use in the manufacture of motor vehicles up to 35m2, for residential, community and industrial use.

Includes maneuver chart VIVO-D103 (analogue for one 24 Vdc engine).

KIT engines Erreka SIRIUS electromechanical 230Vac and 380Vac by chain transmission for industrial sliding doors of up to not more than 50 m2, with electromechanical race finishes.

The engine ROTOR-UNIC, is a hydraulic operator for counterweighted tilting doors up to 20m2, ideal for driving very intensive use garages.

The Rotor-Unic RU3D and RU3R series actuators offer unbeatable advantages in terms of smooth and quiet operation, durability and value for money.

Their advanced technical features make them 100% suitable mechanisms for automating heavy-duty swing doors.

Oil engine FAAC 580 230V heavy-duty for counterweighted sliding doors up to 15m2.

Hydraulic motor 230 V FAAC 593 for sliding doors up to 3500 mm wide and 2700 mm high.

Hydraulic motor HYDOM MINIMAX version INTENSIVE for two-bladed swing doors of large dimensions (maximum 14m2). Allows manual opening and closing in the event of a power failure.

Maintenance on this engine is practically zero.

Ditec BOX3EH 24V electromechanical motor for residential swing doors up to 7m2, with e1HBOX manoeuvre chart in addition, it is important to ensure that the system is fully functional.

KIT engine Clemsa "AB10BC' electromechanical 230V for residential counterweighted tilting doors up to 10m2.

The actuator has the manoeuvre chart CLAS107 incorporated, irreversible locking system with mechanical locking so no locks are required. The manual interior unlocking allows us to actuate the door manually in case of lack of electric current.

Engine Clemsa "AB10BC' electromechanical 230V for residential counterweighted tilting doors up to 10m2.

The actuator has the manoeuvre chart CLAS107 incorporated, irreversible locking system with mechanical locking so no locks are required. The manual interior unlocking allows us to actuate the door manually in case of lack of electric current.

Motor electromecánico irreversible CAME E456 con encoder sin cuadro incorporado para puertas basculantes residenciales de hasta 9m².

El actuador electromecánico monofásico a 230V cuenta con bloqueo y control por encoder con una potencia de 200 W y un par de 420 Nm.

Engine Forsa Electromechanical ERG 24V for revolving doors of a thickness of residential use up to 10m2. What. With encoder and end-of-course micro-switches on opening and closing. Unlocking by lever, maneuver board, anti-crush system, courtesy light and unlocking in case of power failure.