Safety belts

Safety band

The safety belts are an anti-crush system, which reverses engine manoeuvring in case of contact with the soft rubber. They are installed on edges that can trap people or objects that may be accidentally encountered in the path of automation. These bands can be installed wired or wirelessly with Radio Band equipment.

They can be classified mainly in; mechanical, resistive or bumper bands.

Showing 1-24 of 25 item(s)

In the case of vehicles equipped with a retractor, the retractor shall be equipped with a retractor

Safety belts

Resistive safety band 8k2 with resistive rubber

BANDA-SEGURIDAD-RESISTIVA

The safety belts reverse the engine maneuver in case of contact with the part of the rubber profile avoiding the impact between the door and an obstacle (car or person). Resistive safety band 8K2 (per contact) for tilting or swinging doors.The connection can be made wired to the painting or the most recommended option is wireless installation by means of...

Wired mechanical safety belt Erreka

Safety belts

Wired mechanical safety belt Erreka

BANDA ERREKA LM

Mechanical safety belt Erreka for tilting or swinging doors. The connection is made by wiring from the band to the maneuver board. The safety belts reverses engine manoeuvre in case of contact with the part of the rubber profile preventing the impact between the door and an obstacle (car or person).

Electromechanical safety belt Clemsa with a thickness of...

Safety belts

Electromechanical safety belt Clemsa with a thickness of not more than 10 mm

BANDA ELECTROMECANICA CLEMSA

Electromechanical safety belt Clemsa, under the supervision of the cable tension and with sensitivity regulation. What. Recommended use for folding doors. Sensitive throughout the course of the band (even extremes).

Resistive safety band 8K2 Clemsa of a width not exceeding...

Product available with different options

Safety belts

Resistive safety band 8K2 Clemsa of a width not exceeding 30 mm

BANDA RESISTIVA CLEMSA

Resistive safety band 8K2 Clemsa with a length of not more than 20 mm. The safety belt is an anti-crushing system, which reverses the engine manoeuvre in case of contact with the soft rubber. It is installed on edges that can trap people or objects that may be accidentally encountered in the path of automation.

View more

Radio band system FAAC for use in the manufacture of...

Safety belts

Radio band system FAAC for use in the manufacture of motor vehicles

XT S 868 + XR S 868

The radio system simplifies even complex installations, eliminating the need for wiring between the safety band and the automatic control panel. ANDthe radio system consists of a receiver XR S 868, communicating with an emitter XT S 868, to which one or two 8,2 Kohm resistive safety bands or auxiliary devices may be connected. " The safety belts on...

Erreka RADSECTX

Safety belts

Security transmitter by radio 868MHz Erreka RADSECTX

Security transmitter by radio 868MHz Erreka RADSECTX that next to the receiver Erreka RADSECRX will get two-way radio communication for the security bands.

Erreka RADSECRX

Safety belts

Security receiver by radio 868MHz Erreka RADSECRX

Security receiver by radio 868MHz Erreka RADSECRX that next to the issuer Erreka RADSECRX will get a two-way radio communication.

Receiver FAAC XR S 868 for radio safety band

Safety belts

Receiver FAAC XR S 868 for radio safety band

The radio system simplifies even complex installations, eliminating the need for wiring between the safety band and the automatic control panel. The radio system consists of a receiver XR S 868, communicating with an emitter XT S 868, to which one or two 8,2 Kohm resistive safety bands or auxiliary devices may be connected. " The safety belts on the...

Radio band system Motorline MX14 and MR14 for...

Radio band system Motorline MX14 and MR14 for... 2

Safety belts

Radio band system Motorline MX14 and MR14 for anti-crushing rubber

The MX14 and MR14 devices are a solution developed for the prevention of automated vehicle accidents, as required by EN 12978.

4V 150mA solar panel for rechargeable batteries powering...

Safety belts

4V 150mA solar panel for rechargeable batteries powering the transmitter MX14

4V 150mA solar panel with rechargeable battery box powering the transmitter MX14.

Mechanical safety belts ERREKA LB assembled

Safety belts

Mechanical safety belts ERREKA LB assembled

Mechanical safety belts against crushing for automatic doors or electromechanical barriers. The LB mechanical belt is a mandatory safety system to comply with the regulations in force which protects us from being crushed by an automatic door or barrier, can be used in tilting, sectional doors, blinds and electromechanical barriers.

Safety belts

Passive band Erreka rubber bumper profile

ERREKA BANDA PASIVA

Passive band Erreka rubber bumper profile designed for automatic tilting, sliding or swinging doors.

Mechanical safety belt EMFA 70 mm with micro-switches

Safety belts

Mechanical safety belt EMFA 70 mm with micro-switches

BANDA MECÁNICA EMFA

Mechanical safety belt EMFA 70 mm by micro-switches, with cable voltage monitoring and sensitivity regulation. It can be used for swinging or tilting doors, sensitive over the entire path of the band (including ends).

Security card EMFA "BSC-SC' to incorporate an output...

Safety belts

Security card EMFA "BSC-SC' to incorporate an output safety band boundary 8,2 KΩ

Security card EMFA "BSC-SC' to incorporate 8,2 KΩ safety-belt boundary for dead-end manoeuvring frames.

Safety belts

KIT Conductive safety-belt with unassembled aluminium and rubber 40 mm profile

BANDA CONDUCTIVA EMFA

KIT Conductive safety-belt with unassembled aluminium and rubber 40 mm profile. All kits come with 2-meter aluminium profiles, and the 40mm rubber comes to be easily assembled by gluing it on the front. On the other hand, each unit comes with its corresponding caps and resistance.

KIT Closing caps + cable insertion and rubber resistance V2

Safety belts

KIT Closing caps + cable insertion and rubber resistance V2

KIT Closing caps + cable insertion and rubber resistance V2.

V2 WES Sensor Radio control system for safety bands

Safety belts

V2 WES Sensor Radio control system for safety bands

V2 WES Sensor is the Emisor used for radio control of safety bands, which will allow us to install the anti-crush rubber wirelessly thanks to the radio frequency transmitter-receiver. It is necessary from the Base (Receiver) to be able to function. We have the Base + Sensor Kit.

View more

copy of V2 WES Sensor Radio control system for safety bands

Safety belts

copy of V2 WES Sensor Radio control system for safety bands

V2 WES Sensor is the Emisor used for radio control of safety bands, which will allow us to install the anti-crush rubber wirelessly thanks to the radio frequency transmitter-receiver. It is necessary from the Base (Receiver) to be able to function. We have the Base + Sensor Kit.

View more

12mm resistant safety belt kit

Safety belts

12mm resistant safety belt kit

12mm resistant safety band kit. The band is prepared to be mounted directly into the installation wirelessly through a RadioBand.

RadioBand Prastel TCO7SG-KIT para bandas de seguridad

Safety belts

RadioBand Prastel TCO7SG-KIT para bandas de seguridad

RadioBand Prastel TCO7SG-KIT for safety bands resistive 8.2 KΩ where its radiofrequency link to 868 MHz between Emisor and Receptor makes it an excellent choice for the use in residential or community doors of the type sliding doors, tilting or canceling battens.

Set of caps with resistance 8,2KΩ Behavioral Safety Band...

Safety belts

Set of caps with resistance 8,2KΩ Behavioral Safety Band EMFA

210093 + 210094

Set of caps with 8.2K resistance and cable 3 meters for Conductive Security Band EMFA, ultra thin 13mm.

Radioband Transmitter Prastel TCO7SG-TX for resistive...

Safety belts

Radioband Transmitter Prastel TCO7SG-TX for resistive safety bands 8.2 kΩ

Radioband Transmitter Prastel TCO7SG-TX to use as a second channel in safety bands Resistive 8.2 kΩ. Linking is by radiofrequency at 868 MHz between emitter and receiver. This transmitter is designed to use as a second channel next to the Transmitter and Receiver Kit Tco7sg-kit.

Pair of optical equipment Nice FT210 adjustable at 210o...

Safety belts

Pair of optical equipment Nice FT210 adjustable at 210o for sensitive edges

Pair of optical equipment Nice FT210 adjustable at 210o for sensitive edges with wireless transmitter and mobile mounting.

Resistive security band Motorline B2 16x16 mm 8k2

New

Safety belts

Resistive security band Motorline B2 16x16 mm 8k2

1
2

Product added to wishlist

This website uses proprietary and third-party cookies to improve our services and display advertising with our preferences through the analysis of our browsing habits. To give your consent when you press the Accept button.