Electronic plate BFT "BOTTICELLI VENERE BT TO SAY" with a built-in 433 MHz receiver and display to perform parameter settings.

I'm not going to tell you what to do with a built-in 433.92 MHz manoeuvre frame compatible with VARIO controls.

The electronic plate has a socket to add a 6-pin receiver card externally.

This is a 24V Medva PL1000 sliding motor control panel.

Attention the replacement is supplied without the box/casing. Only electronics are supplied.

Electronic plate LIFE RG1R DL for sliding engines with built-in receiver and mechanical end-of-race tickets.

Attention the delivery time of this plate is 10 to 15 days

Table of manoeuvres V2 PD20 for sliding motors FORTECO / AYROS with inverter technology.

Table of manoeuvres Nice SPNKA3R10 for NAKED engines after 2018.

Electronic plate BFT SHYRA for sliding engines "WE AC A".

Electronic plate PPA "TRIFLEX FULL RANGE DISPLAY' for sliding engines of the JETFLEX series.

Electronic plate FAAC E680S compatible with the 24V automatic barrier B680H.

Electronic plate Nice SNA1 for SPIN10, SPIN11 and SN6011 engines.

Ditec E1HBOX electronic board with built-in receiver with potentiometers to regulate force and manoeuvre times.

Electronic plate DEA NET324 for sliding engine LIVI 3/24E.

Replacement plant Nice SNA2 for SPINBUS SN6021 sectional engines.

Electronic plate CAME & MOTOSTAR XS100.

Table of manoeuvres Aprimatic T240 for 1 motor at 230V, intended for use in ONDA sliding motors.

Electronic plate CAME Z3P for use in the manufacture of motor vehicles [1] regulation of deceleration speed. What. It doesn't incorporate a receiver.

Table of manoeuvres Clemsa "SPRINT M24' for sliding engine 'AC424N'.

Electronic plate "PD14" for use as spare parts in sliding motors V2 OTHER IT 'S 24V .

The PD14 is equipped with a display that allows, in addition to easy programming, the constant visualization of the status of the entries; in addition, the structure with menus allows a simple programming of working times and operating logic.

Electronic plate DEA NET724N for sectional engines ADVANCE & SPACE.

In the case of vehicles of categories M1 and N2 with a maximum mass not exceeding 2000 kg:

NICE SPWA20 electronic plate for barriers WIL4 and WIL6

Electronic plate CAME 3199ZLJ14 for controlling 24Vdc actuators compatible with the AXO, FROG, FERNI, FAST engines.

Electronic plate BFT SCHEDA VENERE ARGO G. THIS IS THE FIRST TIME.

Electronic plate FORSA/SEA "SLIDE DG" with digital programming for sliding or swinging 230Vac doors.

Electronic plate Medva QRF H4 24Vdc for 24V sliding motors with emergency battery connection terminals. It has: incorporated receiver RollingCode 433,92 MHz.

Table of manoeuvres Erreka RINO Inverter is 230V.

Electronic plate Erreka OTHER FISH

Electronic plate Beninca "CP.J3-SW' for sectional motors of the 24 V JM series.

Table of manoeuvres V2 AYROSS PD19 230V plate, ideal for use as a spare in the AYROSS sliding motor.

The programming of parameters and configurations is done via the digital screen. The dashboard incorporates NO receiver, but is compatible with MR2 plug-in receivers.

Electronic plate BFT "VENERY BT TO DIS" Operator BOTTICELLI 24V with digital screen.

Electronic plate BFT "VENERE M B GDA' ideal for use as a replacement for the operator TIZIANO B GDA IT 'S 24V .

Table of manoeuvres Erreka ERTAIN for automatic glass doors.

The electronic board is ideal for use as a replacement in automatic glass door systems Erreka it's called the Ertain, Global, and Telescopic System models.

Integrated electronic board BFT "MERAK' for 24V operators of sliding failures.

Electronic plate Forsa ERG 24V replacement for the tilting motor, which has a display for programming parameters and memory of remote controls.

Table NO incorporates built-in receiver, must therefore be added in an additional form by inserting it into the corresponding socket.

Electronic plate Forsa "Evolution' to replace the manoeuvring frames of the RAYO tilting engine.

The 'Evolution' manoeuvre panel is compatible with sliding doors or sliding doors. The built-in receiver Forsa NEWFOR 868 MHz is compatible with TP2 MINI transmitters (on request it can be supplied with GO DMIL receiver).

Electronic plate Erreka NAOS 70/100, ideal as a replacement to replace the built-in panel.

Electronic plate Oxygen CIRCE 230V for residential sliding doors.

Table of manoeuvres CAME ZL55 for use in the manufacture of motor vehicles, used in roof actuators of the VER series (V600 and V700). Incorporates connector to add additionally a radio frequency receiver model AF43S (not included).

" The ZL55 plate is decatalogada, it is recommended to acquire the head of the VER10PLUS which can be adapted to the guide of a VER600/VER700. "

Sliding manoeuvre chart Medva QRF H4 OC for a 230V electromechanical motor with built-in receiveropen code 433 MHz, capacity for 255 codes, force regulation and soft shutdown.

Table of manoeuvres PPA "Agility Hybrid" intended for use as a spare in the 230V DZ CUBE MONO slide motor.

Table of manoeuvres DEA 212E for one or two 230Vac motors with built-in 433 MHz radio receiver.

Plate 212E can be used as a replacement slide DEA LIVI at 230V, models 403N, 6N, 803N and 9N.

Electronic plate BFT SCHEDA LEO B CBB for sliding engines from Icaro.

The electronic board is compatible with the following models:

• Sliding engine BFT Icarus SMART AC A
• Sliding engine BFT Icarus ULTRA AC A

Electronic plate BFT SHYRA CPEM for sliding, swinging, swinging and rolling shutters with LCD screen programming.

It has a removable knob to connect accessories that extend the functionality of this control board. Up to 63 controllers with Rolling Code technology can be installed, which you can also buy in our product catalogue, always with the best price and reliable quality of the leading brands in the automation market.

Replacement electronic card for tilting motor FAAC 550.

Replacement electronic plate Clemsa CLAS 305 for the operation of slides with a maximum power of up to 700 W of power. What. It has optional anti-crush system with encoder.

Electronic plate CAME ZN7 for the 24V BXV series.

Electronic card 780 D for sliding motor FAAC 746 and 844.

NICE ROA37 manoeuvre chart for sliding engine THOR 1500, incorporating a receiver with RollingCode 433,92 MHzcompatible with FLOR and SMILO emitters. The programming is analog using micro dip switches.