Magnetic ground spindle Motorline MD150 for vehicle detection and automatic opening of barriers or doors.

The ground magnetic spiral is useful for accurately detecting the presence of metal objects, such as cars and trucks, even when vehicles are not in motion.

We introduced a new concept of wireless vehicle detection. What. The system e-Loop replaces traditional wired inductive loops, saving time and money it also increases reliability.

Installation in 3 easy steps

1. Encode the e-Loop
2. Fix the e-Loop to the driveway
3. Calibrate the e-Loop... and it'll be up and running in less than 15 minutes

It saves many hours of installation time compared to wired loop systems.

Magnetic sensors CAME SMA for the detection of metal masses.

Magnetic loop detector Erreka IBUC (Carlo Gavazzi) What is it in 230Vac of measurements 80x40x79 mm, available for 1 or 2 loops.

Machinery for making pulp of fibrous cellulosic material V2 VEK for detecting the presence of vehicles with sensitivity setting, models with 1 or 2 relays.

Magnetic device which is joined by a spiral allows detection of metallic masses in the transit zone. After identifying the mass, such as a car or motorcycle, the detector sends the signal to the control unit.

The LDD loop detector can be installed in most parking, traffic and vehicle access control applications for the control of barriers, doors, bollards and vehicle access equipments . Automatic frequency tuning and simple sensitivity adjustment provide easy setup and installation. The automatic increase in sensitivity ensures reliable detection of tall vehicles.

The indication Multicolored LED allows the user to easily adjust the inductance and indicates installation problems intuitively for easy diagnosis. The user individually assigned relay mode for 2 SPDT outputs provides easy adaptation to a multitude of applications. The directional logic in the double loop version can be used

L JDM vehicle magnetic loop detector Erreka for 1 or 2 loops, mainly used to detect vehicles, with 2 two-way relay outputs.

Magnetic detector Motorline MD100 for vehicles detecting the presence of metallic objects 86 even when the vehicle is not moving.

Magnetic detector Forsa highly accurate which is connected to a coil which detects the presence of vehicles

(metallic masses) in a predetermined area.

Magnetic burial spiral for vehicle detectors. what. available in two versions:

• Spire to bury, cable to 2x1, 20 m in length.
• Spire to bury, cable to 3x2, 20 m in length.

It's compatible with all brands of presence detectors.

Presence detector Allmatic A1H-U for detecting the presence of vehicles, 1 relay at 12/24V.

Machinery for making pulp of fibrous cellulosic material Clemsa, to detect vehicles (cars or motorcycles) when that vehicle passes over the door, it reverses the maneuver just as if we were passing in front of a photocell. A magnetic loop is also usually installed to prevent an owner from opening the door to enter on foot, therefore the door would only open if the magnetic loop detects a vehicle in the area where the winding is installed (usually in the buried ground).

A magnetic loop is ideal for detecting vehicles. The equipment consists of a base plate containing the output relays and a card that is the magnetic detector. Loop input to the detector protected against surges. Automatically reset.