List of products by brand MEDVA

Waterproof box button with OPEN, SHUT, and emergency STOP buttons.

Infrared radar 3H-IR14C Double technology with safety 3m maximum height, 4 dual relay outputs certified according to EN 16005.

Automatic activation of sliding doors and pedestrian safety sensor. Small in size, with a precisely adjustable detection area.

12mm resistant safety band kit.

The band is prepared to be mounted directly into the installation wirelessly through a RadioBand.

Safety Radar PRIMETEC B MEDVA, double-tech detector and microwave + infrared radar.

In the case of vehicles of categories M1 and N2 with a maximum mass exceeding 2000 kg:

Roof motor kit MEDVA PG120 of 1200N for sectional doors of a thickness not exceeding 16 m2 with steel split guide with strap. It incorporates a 433 MHz receiver with easy programming via its LED display.

Plastic casing slide motor slider Medva ELIOT.

Medva ELIOT sliding motor unlocking lever.

Axis adapter of 31,75mm designed for sectional traction motors to the shaft.

Hydraulic retainer or rotary brake for sliding door with slope.

CONTROLGIRO is a rotary brake M4 Z16 (standard version) or M5 (PUJOL MARATHON PRO version) which has been developed for regulating and controlling door speed in slope facilities all the way.

Emergency fence (STOP) with watertight case to stop the automatic in case of emergency.

Safety photocell MEDVA PH6, transmitter-receiver at 12/24V AC/DC with a maximum range of 25 metres.

USB WiFi device for sectionally mounted Medva VULCANO.

Electrically operated motor Medva MARTE for use in the manufacture of products falling within heading 8528 up to 2000 kg (MARCH 2000 H4) and up to 2500 kg (MARCH 2500).

" THE PRODUCT HAS BEEN DISCONTINUED BY THE MANUFACTURER . WE RECOMMEND YOU CHECK OTHER ENGINES IN OUR SLIDING ENGINE CATEGORY "

If the vehicle is equipped with an electric motor, it shall be equipped with an electric motor.

Designed for use in GEARBOX engines.

Medva "VERSUS I20ES" triphasic 230/400 V, absolute or end-of-race encoder, with configurable inputs and outputs.

Medva PC190 control panel for 1 or 2 24V to 160W engines, with digital display, connected for 24V electric lock, encoder and force regulation and soft stop.

Medva "FULL PRO FC" manoeuvre board for 1 or 2 230V actuators with encoder and electric lock output.

Medva ROLLER manoeuvre chart for 230V rolling shutters with a built-in 868 MHz receiver.

Electric lock voltage reducer from 24V to 12V.

BOOSTER PC170/190 is a voltage reducer for electric lock to 12V in frames with 24V output.

Kit of two PC170 batteries at 12V & 2,2Ah for the Medva PW series throttle motors.

Plastic housing Medva PL1000 in black.

Motor head Medva Vulcan for residential sectional doors with anti-crush and soft-stop system.

The operator has a maneuver board and a built-in receiver.

Attention This product does not include the Guide. The engine head is supplied for use as a replacement.

KIT engine Medva VULCANO for residential sectional doors with anti-crush and soft-stop system.

The operator has a maneuver board and a built-in receiver.

Garage control ZAFIRO four channels rolling code 433 MHz.

Compatible with the Medva VULCANO sectional engines.

Motor for sectional axle traction doors of the Medva type INDUS90230V electromechanical with 90Nm and built-in maneuver box.

Saxo or telescopic gearboxes for Medva model HB1 engines

Electromechanical motor of 24 V dc MEDVA PL500 for sliding doors of residential use up to 500 kg with built-in receiver box and 2 RollingCode controls.

Hydraulic lock Medva CHBB with inside key and outside bulb 50mm.

Hydraulic lock Medva CHPB with inside knob and outside bulb 50mm.

2-metre lathe the unit for Medva swinging or tilting hydraulic motors with their respective racors.

230V Medva ECO hydraulic motor for residential and community swing doors with a maximum length of 4, 6 and 7 metres depending on the model.

Improvements have been made to the actuator to make it quieter and faster, offering higher opening and closing speeds

Patented adjustable ring system on the stem to adjust opening degrees, adjustable soft stop at closing.

Machinery for making pulp of fibrous cellulosic material, except in the BACN model.

Electromechanical motor of 24 V dc MEDVA PL1000 for sliding doors of residential use up to 1000 kg with built-in receiver box and 2 RollingCode controls.

" THE PRODUCT HAS BEEN DISCONTINUED BY THE MANUFACTURER . WE RECOMMEND YOU CHECK OTHER ENGINES IN OUR SLIDING ENGINE CATEGORY "

Electrically operated motor 230V Medva BASIC H4 for use in the manufacture of motor vehicles residential use from one or two leaves up to 10m2.

Hydraulic motor for tilting doors one or two-bladed counterweights with a not more than 14 m2, for residential, community or industrial use.

Hydraulic motor for tilting doors one or two-bladed counterweights with a not more than 14 m2, for residential, community or industrial use.

24 V electromechanical motor with chain drive for counterweighted tilting doors not exceeding 4 m in height and 20 m2.

Ideal for residential, community and industrial use.

Manufacture from materials of any heading, except that of the product for counterweighted tilting doors of 18, 25, 36 m2.

Ideal for residential, community and industrial use.

230 V Medva HLR hydraulic motor for residential and community swing doors a maximum length of 3 and 6 metres.

Improvements to the actuator have been applied that make it quieter and faster, offering a higher opening and closing speed.

Engine with a new pump, makes it faster and quieter.

Patented adjustable ring system on the stem to adjust the degrees of aperture, smooth stop adjustable at opening and closing.

Connection to hydraulic lock.

Kit Electromechanical articulated motors Medva PA250 24V for swinging doors up to 2,50 meters per blade and 250 kg of weight.

The PA250 engines feature a built-in box-receiver, and are perfect for powering residential swing doors that feature wide pillars.

Kit Electromechanical motor Medva PW530 24V for swing doors up to 4,5 m or 550 kg weight.

The PW530 engine is ideal for powering semi-intensive residential and community folding doors

Kit Electromechanical articulated motor Medva PA250 of 24V for swing doors up to 2,50 meters per blade and 250 kg of weight.

The PA250 engines feature a built-in box-receiver, and are perfect for powering residential swing doors that feature wide pillars.

This is a 24V Medva PL1000 sliding motor control panel.

Attention the replacement is supplied without the box/casing. Only electronics are supplied.

Hydraulic motor for tilting doors one or two-bladed counterweights with a not more than 14 m2, for residential, community or industrial use.

Garage crew MEDVA model of the vehicle with 3-channel RollingCode coding at 433.92 MHz.

Sliding manoeuvre chart Medva QRF H4 OC for a 230V electromechanical motor with built-in receiveropen code 433 MHz, capacity for 255 codes, force regulation and soft shutdown.

Electronic plate Medva QRF H4 24Vdc for 24V sliding motors with emergency battery connection terminals. It has: incorporated receiver RollingCode 433,92 MHz.