List of products by brand MEDVA

Hydraulic motor for tilting doors one or two-bladed counterweights with a not more than 14 m2, for residential, community or industrial use.

24 V electromechanical motor with chain drive for counterweighted tilting doors not exceeding 4 m in height and 20 m2.

Ideal for residential, community and industrial use.

Manufacture from materials of any heading, except that of the product for counterweighted tilting doors of 18, 25, 36 m2.

Ideal for residential, community and industrial use.

230 V Medva HLR hydraulic motor for residential and community swing doors a maximum length of 3 and 6 metres.

Improvements to the actuator have been applied that make it quieter and faster, offering a higher opening and closing speed.

Engine with a new pump, makes it faster and quieter.

Patented adjustable ring system on the stem to adjust the degrees of aperture, smooth stop adjustable at opening and closing.

Connection to hydraulic lock.

Kit Electromechanical articulated motors Medva PA250 24V for swinging doors up to 2,50 meters per blade and 250 kg of weight.

The PA250 engines feature a built-in box-receiver, and are perfect for powering residential swing doors that feature wide pillars.

Kit Electromechanical motor Medva PW530 24V for swing doors up to 4,5 m or 550 kg weight.

The PW530 engine is ideal for powering semi-intensive residential and community folding doors

Kit Electromechanical articulated motor Medva PA250 of 24V for swing doors up to 2,50 meters per blade and 250 kg of weight.

The PA250 engines feature a built-in box-receiver, and are perfect for powering residential swing doors that feature wide pillars.

This is a 24V Medva PL1000 sliding motor control panel.

Attention the replacement is supplied without the box/casing. Only electronics are supplied.

Hydraulic motor for tilting doors one or two-bladed counterweights with a not more than 14 m2, for residential, community or industrial use.

Sliding manoeuvre chart Medva QRF H4 OC for a 230V electromechanical motor with built-in receiveropen code 433 MHz, capacity for 255 codes, force regulation and soft shutdown.

Electronic plate Medva QRF H4 24Vdc for 24V sliding motors with emergency battery connection terminals. It has: incorporated receiver RollingCode 433,92 MHz.

Hydraulic motor Medva HB1 for swing doors one or two-bladed counterweights with a not more than 25 m2, for residential, community or industrial use.

Garage control Medva Powertech with coding RollingCode 433.92 MHz of 4 channels.

Activation of this emitter shall be carried out directly on the receiver according to the instructions of the control panel model.

Mechanical power supply for residential sliding doors up to 2.5 metres.

Kit Electromechanical motors Medva PW200 24V for swing doors for residential use up to 2.5 meters per sheet.

Mechanical power supply for residential use swing doors leaves up to 3,5 metres.

Kit Electromechanical motors Medva PW230K 24V for swing doors for residential use for sheets up to 3,5 meters.

The PW230K engine is designed to power residential swing doors that we can give semi-intensive use.

Kit Electromechanical motor Medva PW230K 24V for residential use swing doors for sheets up to 3,5 meters.

The PW230K engine is designed to power residential swing doors that we can give semi-intensive use.

Garage command Medva Powertech PR4 with coding RollingCode 433.92 MHz of 4 channels.

Activation of this emitter shall be carried out directly on the receiver according to the instructions of the control panel model.

Medva ECO waterproofing kit complete with joints, torics and collars.

Protective cap made of Medva ELIOT plastic.

This is a Medva ELIOT top plastic case.

Damper with regulation and magnet Medva"CIL3095" with 95mm stroke designed to dampen the closures of industrial sliding doors.

The linear damper CIL3095 – CIL30120 reduces the speed of the door during the final stretch of the tour, avoiding sudden knocks and personal injury. The speed can be adjusted according to the need of the installation. The shock absorber is automatically charged by the neodymium magnet each time the door is opened, being operational for the subsequent closing cycle.

KIT CA HOME kit of two trailing hoods MEDVA HOME to weld on bars.

Nearkey is an access control device mainly applied to the opening of electric doors and push buttons and buttons using the smartphone and Bluetooth technology.

Kit 2 12V 1,3Ah batteries and cables for motor ranges MEDVA OF WHICH:.

Support DUO attachment for two CONTROLGIR M4, maximum 14Nm.

Hydraulic whip MEDVA 6 mm spindle ends and 1400 mm length.

Garage crew MEDVA model of the vehicle with 4-channel RollingCode coding at 868 MHz.

The new transmitter can be programmed remotely using a pre-programmed control or by pressing the "PROG EMISSORES" button on the receiver.

Kit of 2 grooved crankshaft for Medva BASIC H4 engine.

Support or mounting plate Medva CS HB1 C+P with anchor bolts.

Support or mounting plate Medva CS HOME with anchor bolt.

Hydraulic cylinder opening and whip kit for motor MEDVA (engines without lock)

This is a Medva P2HI stainless steel locking pin for double-bladed swing doors.

Solar power kit with 12V batteries for use in 24V vibrating motors or slidesfor manoeuvring without electric current at 230 V.

MFC race finishes by NC/NO or NC/NC micro-breakersdesigned for garage automation.

KIT B2M BASIC 2 chiselled rods 27 mm x 2000 mm + 2 tractor heads for welding.

Compatible with the Medva BASIC H4 engine.

Saxo or telescopic gearboxes for the HOME model Medva engine.

External unlocking bulb with Allen key for Medva Basic engine.