Parking controls BFT 2-channel COOL MITTO, RollingCode 433.92 MHz system.

Module for the operation of 1 automatic open-stop-close in single or multi-group mode.

Garage emitter BFT MITTO 2 channels, RollingCode at 433.92 MHz. Programming by a command already programmed or manually (according to the receiver model).

ROGER E80 TX52R Garage Handle 433.92 MHz and 2 channels.

Issuer CAME TOP44RBN encoding RollingCode and FixedCode 433 MHz.

Issuer Prastel SLIM2E+ RollingCode 2-channel, 433.920 MHz, XP and RW+ code management, encrypted transmission.

Garage crew Nice MYGO4 monodirectional 433 MHz.

Garage control ZAFIRO four channels rolling code 433 MHz.

Compatible with the Medva VULCANO sectional engines.

Garage crew Nice SMILO 4 channels RollingCode is 433.92 MHz.

This emitter is supplied with a standard code which can be memorised on the receiver by radio or manually according to the corresponding instructions.

Control of household blinds Somfy Situation Pure II unidirectional 1 channel at 433,42 MHz.

Garage crew Clemsa model MUTANcode N4 with 4 channels, RollingCode is 433 MHz.

Garage crew LIFE Max. Two channel rolling code 433.92 MHz.

Garage control Medva Powertech with coding RollingCode 433.92 MHz of 4 channels.

Activation of this emitter shall be carried out directly on the receiver according to the instructions of the control panel model.

Issuer Clemsa Mutan-II Long range model NT LR with 2 channels, a Rollingcode 868 MHz system with an elegant and minimalist design.

Issuer Nice It was One model "ON9E" 9-channel at 433.92 MHz with RollingCode encoding.

Garage control KING GATES STYLO4K Rolling code is 433 MHz.

Stylo 4K, inspired by the automation sector, is a rugged and very beautiful remote control with a chrome metal structure.

Garage crew LIFE DREAM Rollingcode three channels at 433 MHz.

This transmitter must be programmed directly into the receiver.

It is compatible with the following emitters: IT'S NOT LIKE I'M GOING TO BE ABLE TO DO ANYTHING

Garage control of the CLEMSA brand, model MASTERcode MV123 three green buttons. The frequency of this remote is 433.92 MHz and coding is done by 8 switch system.

Garage crew Clemsa model MUTANcode N84 4 channels, rolling code 868 MHz.

This emitter comes with the standard code, so it won't work in garages where an installer has put in a custom code. It is 100% compatible with the receivers and receiver cards of this website Tecnoparking. Activation can be done by the receiver button or remotely by radio with a pre-programmed control.

Transmitter Nice ERA P6 for independently operating up to 6 blinds or awnings. What. RollingCode type radio frequency 433 MHz with a range of up to 200 metres outdoors and 35 metres indoors. Powered by two standard batteries for 2 years approx.

Action 49x150x14mm . With wall support included.

The NICE ERA P6 transmitter is compatible with the entire engine range Nice.

Opla wall mount for NiceWay buttons.

Discreet, elegant and functional: Very thin - as much as the single plate - the transmitters, located on the Opla wall plate, allow you to add control points in a discreet and elegant way without masonry work.

NiceWay's Opla wall plates are available in square Opla-S and rectangular Opla-R versions, and in numerous color variants.

Garage crew CAME model TOP-434EE with 4 channels, fixed code at 433.92 MHz with self-learning recording system with a pre-programmed control on the receiver.

Garage crew LIFE FIDO RollingCode 433.92 MHz with two channels.

Garage crew FAAC TM2868DS binary at 868 MHz.

The encoding of this emitter is done by a combination of 12 dip switches.

Garage crew FAAC TM1868DS binary at 868 MHz.

The encoding of this emitter is done by a combination of 12 dip switches.

Garage command SEA HEAD ROLL 868 MHz on two channels.

Wall support DEA for issuers GTI2 & GTI4 of measure 80x80x15 mm in black and white.

This is the ENTREMATIC ZEN2C, Rollingcode at 433.92 MHz from 2 channels.

The ZEN2C model replaces the old model DITEC GOAL 4C.

This is the ENTREMATIC ZEN2 model, Rollingcode at 433.92 MHz from 2 channels.

The ZEN2 model replaces the old model DITEC GOAL FOUR.

Garage crew Forsa Delta 4 channels at 433.92 MHz.

Transmitter Nice ERA P1 to operate one or a group of blinds or awnings. What. RollingCode type radio frequency 433 MHz with a range of up to 200 metres outdoors and 35 metres indoors. Powered by two standard batteries for 2 years approx.

Action 49x150x14mm . With wall support included.

The NICE ERA P6 transmitter is compatible with the entire engine range Nice.

Issuer Nice It was a 2-channel Inti at 433.92 MHz available in various colors (Pack of 10 units).

Issuer Nice It was One model "ON4CE" 4-channel at 433.92 MHz with multiple insertion sequential coding.

Issuer Nice It was One model "ON2CE" 2-channel at 433.92 MHz with multiple insertion sequential coding.

Garage crew FAAC TM2433DS binary at 433 MHz.

The encoding of this emitter is done by a combination of 12 dip switches.

Garage crew FAAC TM1433DS binary at 433 MHz.

The encoding of this emitter is done by a combination of 12 dip switches.

Issuer AERF Ground C4 with channels 2-6-4-F RollingCode frequency 433.92 MHz.

It allows the use of up to 5 channels using a combination of buttons.

This is the ENTREMATIC ZEN4 garage door, Rollingcode at 433.92 MHz from 2 channels.

The ZEN4 model replaces the old model DITEC GOAL FOUR.

Garage crew KEY 4 channel PLAY at 433.92 MHz with RollingCode type Keeloq coding.

Programming shall be carried out on the receiver button according to the instructions in the manual.

Garage emitter JH-TF2 fixed code 433,92 MHz it is compatible with ROLLTORE MPSTF2E.

Programming is done by a combination of micro dip switches and the new emitter will operate automatically in the garage.

Garage crew JCM 4 channel RollingCode coded at 433 MHz.

The emitter has a stand and keychain.

Garage crew JCM two channel RollingCode at 433 MHz.

The emitter has a stand and keychain.

Garage crew JCM 1 channel RollingCode at 433 MHz.

The emitter has a stand and keychain.

" THE ONE-BUTTON NEO10GIB EMITTER HAS BEEN DECLASSIFIED BY JCM, AND THEY'LL ONLY MAKE IT IN 2 BUTTONS. WE HAVE THE MODEL IN STOCK THE NEW 20GIB"

Issuer Clemsa Subject to the following conditions: 2-channel, unmatched 868 MHz Rollingcode system with a sleek and minimalist design.

Parking controls Oxygen VENUS three channel RollingCode 433 MHz

Garage command Trinario Celinsa AK-2 replacing the old Clemsa TX-2 with frequency 30.035

The encoding of this emitter is done by micro dip switch's.

Garage command Trinario Celinsa AK-1 which replaces the old Clemsa TX-1 with frequency 30.035

The encoding of this emitter is done by micro dip switch's.

Garage crew PPA the frequency range of the radio spectrum shall be as follows:.