Sliding gate accessories

Magnetic race finishes Beninca "MLS", suitable for cold areas.

Ditec magnetic race finishes for sliding motors.

Card battery system CAME for electricity supply in the event of a power failure. What. Compatible with sliding motors CAME BKV.

The system allows us to automatically recharge batteries. It does not include the batteries but you can use the universal ones regardless of their maximum capacity.

KIT of 2 24Vac auxiliary batteries with exclusive charger (in a separate box) for direct current slide motors the DINGO range, the NAOS and ZETA tilting/sectional doors, and the NET and OMNI automatic barriers.

Damper with regulation and magnet Medva"CIL3095" with 95mm stroke designed to dampen the closures of industrial sliding doors.

The linear damper CIL3095 – CIL30120 reduces the speed of the door during the final stretch of the tour, avoiding sudden knocks and personal injury. The speed can be adjusted according to the need of the installation. The shock absorber is automatically charged by the neodymium magnet each time the door is opened, being operational for the subsequent closing cycle.

450N unlocking device for LIVI/N sliding engine to use with BLINDOS.

Unlock cable length 4.5 meters.

Base or bench PPA in iron for sliding motors.

Magnetic reading device Beninca "MAG.E" to detect obstacles and control deceleration.

External unlocking device Beninca "SB.BULL20.F" anti-breach with cable.

External mounting for sliding engine unlocking Beninca YOU KNOW, BULL.

The cable is 15 feet long.

Tope Dock Squad D-25 in galvanized iron.

Transformer set and strip LED for motor DEA Geko / X and Livi / X composed of a COB LED tape (white light) of 60 cm and feeder + relay.

The ARI02 kit of Erreka they 're hardware to power sliding doors that are telescopic, and we supply it with a 3-metre guide and chain drive system.

This transmission kit is recommended for use on sliding engines with mechanical running ends.

Magnetic contact Clemsa CM1 for pedestrian doors. What. Medium power. In the case of vehicles of categories M1 and N2. Surface installation. 6 terminals. High power.

Battery buffer 24V 1,6 Ah for sliding motor V2 THE TORQ.

24 V buffer battery charger for sliding motors V2 THE TORQ.

Support DUO attachment for two CONTROLGIR M4, maximum 14Nm.

Pinon Z16 FAAC for 746 and 844 piston engines.

Plastic housing Nice THE ROBUS HS250/600.

Hydraulic retainer or rotary brake for sliding door with slope.

CONTROLGIRO is a rotary brake M4 Z16 (standard version) or M5 (PUJOL MARATHON PRO version) which has been developed for regulating and controlling door speed in slope facilities all the way.

Box for compatible power plants Motorline THE STARK4000

Box for compatible power plants Motorline SLIDE/OL

12-tooth crown, module 6, use associated with ROA81 zipper.

Run is supplied with a module 4 crown for use with standard ROA7 and ROA8 zippers.

Emergency battery V2 For the purposes of this Regulation, the following definitions shall apply:

Compatible switchgear Motorline BRAVE 500

Kit batería de seguridad 2 x 1,2Ah para motor corredera Erreka Dolfin

Moulded moulds for sliding doors

Kit 2 12V 1,3Ah batteries and cables for motor ranges MEDVA OF WHICH:.

The Sprint Low is intended to insert some self-charging batteries by the same electronic board, which ensures its operation in the event of a power failure.

The kit consists of 2 batteries, the stand and the charging plate.

Battery charging kit + motor batteries Forsa Mercury 24V

12V and 1.2A motor battery CAME of 24 V.

Plastic motor housing Nice ROAD 400.

Kit of 2 12V 1.2Ah batteries for DEA LIGHTWEIGHT 24V with motor connection system and mounting plate.

Thanks to the 12V batteries we can use the LIVI/N 24V motor with battery system when we lose power.

Replacement nylon pinion for engines TMP of the SPRINT LOW series.

Magnetic race finish pair Pujol This is Marathon Pro Q II M5. Plastic shell.