Engine Forsa Electromechanical ERG 24V for revolving doors of a thickness of residential use up to 10m2. What. With encoder and end-of-course micro-switches on opening and closing. Unlocking by lever, maneuver board, anti-crush system, courtesy light and unlocking in case of power failure.

Electric motor kit V2 OTHER for use in the manufacture of motor vehicles residential buildings up to 9 m2.

Electromechanical engine V2 OTHER for use in the manufacture of motor vehicles residential buildings up to 9 m2.

Electrically operated motor 230V Medva BASIC H4 for use in the manufacture of motor vehicles residential use from one or two leaves up to 10m2.

Engine Aprimatic Electrical connections residential tilting doors of up to 10 m2.

The ALZO55 engine has a built-in receiver, and 2 TX4E controls are included.

Motor kit Aprimatic Electrical connections residential tilting doors of up to 10 m2.

Electromechanical engine EMFA ROT MEC at 230V for residential tilting doors up to 8m2.

Self-locking mechanism with built-in box-receiver 433 MHz to drive 1 or 2 sheet counterweighted tilting doors.

Electromechanical engine EMFA ROT MEC at 230V for residential tilting doors up to 8m2.

Self-locking mechanism with built-in box-receiver 433 MHz to drive 1 or 2 sheet counterweighted tilting doors.

Electromechanical engine FAAC 550 for hinged doors up to 12 m2 with the possibility of using a second 'slave' engine.

Engine Beninca Electromechanical ZED version 230V or 24V for counterweighted residential swing doors up to 12,5m2 with built-in central and encoder.

Irreversible electromechanical gear motor for residential counterbalance swing doors. Available in 230Vac and 24Vdc versions with or without mains. Courtesy light, race finishes and built-in control buttons.

Engine Clemsa "AB10BC' electromechanical 230V for residential counterweighted tilting doors up to 10m2.

The actuator has the manoeuvre chart CLAS107 incorporated, irreversible locking system with mechanical locking so no locks are required. The manual interior unlocking allows us to actuate the door manually in case of lack of electric current.

Electromechanical engine DEA "LIVI 902 SR' 230V for semi-intensive residential tilting doors up to 9 m2 with built-in analogue box-receiver.

The engine incorporates mechanical opening-closing stroke ends for more precise adjustment.

Electromechanical motor BENINCA AU96 for residential use up to 12m2.

Motor DMIL RAYO 1 electromechanical 230V for residential revolving doors up to 9m2, the manoeuvre chart (DEVELOPMENT) built-in analogue and emitter compatible receiver Forsa 868 MHz.

Motor kit Erreka Electromechanical ZEUS with saxophone hardware for tilting doors up to 9m2 residential use with 230-Vac lock and electromechanical end run.

Motor DMIL RAYO 1 electro-mechanical 230V with running end and encoder, for residential swing doors up to 9m2, the manoeuvre chart (DEVELOPMENT) built-in analogue and emitter compatible receiver Forsa 868 MHz.

The RAYO 1 EVO engine can be installed in 1 or 2 hinged doors.

Ditec BOX3EH 24V electromechanical motor for residential swing doors up to 7m2, with e1HBOX manoeuvre chart in addition, it is important to ensure that the system is fully functional.

KIT 24 V electromechanical motor Beninca MARK for built-in residential doors up to 8m2.

The operator has built-in central, receiver and encoder.

24V electromechanical motor for tilting doors two-leaf BFT PHEBE BT A U C with integrated picture for tilting garage doors with Maximum surface 8 m² and intensive use with decreased speed.

Maneuver time 17-20 s, IP20 and End of Electromechanical Race. Control Central Built-in with D-Track

Electromechanical engine DEA "LIVI 902' 230V or 24V for semi-intensive residential swing doors up to 9m2.

The 'LIVI 902' version does not incorporate a manoeuvre chart and the 'LIVI 905' version incorporates a digital manoeuvre chart. The engine travel is done by Encoder but optionally you can acquire the end of race system.

Engine Forsa Electromechanical ERG 24V for revolving doors of a thickness of residential use up to 10m2. What. With encoder and end-of-course micro-switches on opening and closing. Unlocking by lever, maneuver board, anti-crush system, courtesy light and unlocking in case of power failure.

KIT electric motor for residential use, BFT model"PHEBE BT A U C" for automating swing doors of up to 8m2.

Electromechanical operator for residential use to automate tilting garage doors.

The integrated control centre, allows the operation of a second engine for large doors or with an integrated pedestrian door. For tilting doors up to 10m2 with installation of two motors.

In addition, microprocessor technology allows the torque of the motors to be controlled with maximum precision and complete safety.

Electromechanical motor kit DEA Livi 902 SR 230V for residential tilting doors of semi-intensive use up to 9m² with built-in analogue receiver. The kit can be chosen with telescopic fittings + torque bars or with central saxette hardware.

The motor incorporates mechanical opening-closing endings for a more accurate adjustment.

Motor kit Erreka Electromechanical ZEUS for revolving doors up to 9 m2 residential use with 230-Vac lock and electromechanical end run.

Engine Erreka Electromechanical ZEUS for revolving doors up to 9 m2 residential use with 230-Vac lock and electromechanical end run.

THE KIT Electromechanical engine Erreka ORION 230Vac for swing doors for use in the manufacture of products falling within heading 8528 [1] encode or end run. What. Can be used with inside opening or outside opening.

Electromechanical engine Erreka ORION 230Vac for swing doors two-bladed counterweight up to 20m2, available with encode or end run. What. Can be used with inside opening or outside opening.

KIT engine Clemsa "AB10BC' electromechanical 230V for residential counterweighted tilting doors up to 10m2.

The actuator has the manoeuvre chart CLAS107 incorporated, irreversible locking system with mechanical locking so no locks are required. The manual interior unlocking allows us to actuate the door manually in case of lack of electric current.

Motor electromecánico irreversible CAME E456 con encoder sin cuadro incorporado para puertas basculantes residenciales de hasta 9m².

El actuador electromecánico monofásico a 230V cuenta con bloqueo y control por encoder con una potencia de 200 W y un par de 420 Nm.

Motor gearbox DEA LIVI 550 PL designed to power book doors very heavy industrial type.

Non-reversible electromechanical motor CAME E456 with embedded ZE5 box and encoder for residential sliding doors up to 9 m2.

The single phase electromechanical actuator at 230 V has a lock and encoder control with a power of 200 W and a torque of 420 Nm.