Receiver FAAC RP 868 SLF plugged in, fast-coupling (compatible with all electronic devices FAAC of a kind used in motor vehicles 5 pin rapid coupling, or external utility by connecting to the interface of the accessory RP relay).

Receiver kit Nice long range OXILR with two-way emitters and a universal adapter for frames from other manufacturers.

Plug-in receiver card Clemsa "RNE248" frequency 433 MHz & 868 MHz, 2 channels with memory up 400 users.

The receiver can operate independently at 433 MHz or 868 MHz and is compatible with Mutan and Mutan-II broadcasters.

Connection receiver module for manoeuvring frames V2 / 433.92 86 868.30 MHz / Personal Pass Royal

Other, of circular cross-section Forsa S-500 at 868 MHz for TP-2 transmitters.

Plug-in receiver card Erreka for use in the manufacture of motor vehicles standard code. The model IRRE2 does not incorporate memory and is only compatible with the KUMA fixed-code trinary emitter. The version IRRE2-250 incorporates memory for up to 250 users and is compatible with the KUMA and IRIS emitter.

Other, of circular cross-section Clemsa Mastercode "RMV 2" 433 MHz with two channels.

The receiving card 'RMV 2" connects directly to manoeuvring frames Clemsa have at their disposal connection 4 pins which allows us to connect directly to the circuit board without the need for wiring.

Plug-in receiver card Clemsa Mutated for 400 users, of 2 channels at 433,92 MHz and 868 MHz on the same receiver. Compatible with the Mutan and Mutan-II emitters.

Plug-in receiver card CAME reference AF43S for fixed code 433,92 MHz, compatible with the command TOP-432EE & TOP-434EE.

Receiver module Motorline MR10 to 30 transmitters.

It can incorporate MC230/MC400/MR12 power supplies.

Electronic board 12/24V that allows us converting a plug-in receiver into a wired output for use in most frames with alternating button output.

Other, of circular cross-section Aprimatic RX1E 433 MHz for manoeuvre frames of the Apricode series with a capacity of 1000 codes.

It has four programming modes: Autocoding, Common Code, Urbanization Mode and Access Control.

Rolling code can be enabled by a jumper.

Adapter Clemsa ADT 5 A to insert RNE248 (4 pins) cards in maneuver boxes FAAC (6 pins).

Other, of circular cross-section Nice OXI BD 433,92 MHz bidirectional,with Opera system functions.

Memory Nice additional for 255 combinations

The box contains 5 units.

Adapter for new cards Clemsa Master code RMV and mutant code RNE248.

Memory Erreka of 1000 codes compatible with the RollerCode and TAG systems.

230Vac or 12-24Vac/dc plug-in receiver relay interface, with a programmable channel allowing the use of a plug-in receiver in installations without radio connector.

Usable in all types of temperatures between -20/+60.

Valid for any ERREKA receiver.

Receiver adapter FAAC for use in the manufacture of motor vehicles. What. Allows the use of a receiver FAAC RP on frames not equipped with a plug-in card connector, the connection would be made to the alternate button of the manoeuvre box.

Other, of circular cross-section Nice OTHER 433.92 MHz bidirectional long range.

Adapter Clemsa ADT 3 B to connect MutanCode cards to Motors FAAC.

Plug-in PUJOL VARIOCODE TRV receiver with capacity of 255 users and frequency 433.92 MHz.

OXIBD plug-in receiver kit with two-way 433 MHz Era One BD transmitters.

Plug-in card Timed garage light, designed to switch on the garage light instead of the usual timer when starting the manoeuvre opening the manoeuvre box.

It incorporates a 16A 230V voltage-free contact relay.

The card is self-powered by inserting it into the appropriate maneuver box connector (usually a traffic light card connector).

Other, of circular cross-section for steering wheels with connection 6 pins with output 4 pins other, of circular cross-section Clemsa Mutant code is RNE248.

Modular radio receiver Erreka IRRE2V2-250 for ZEUS engine compatible with the KUMA or IRIS controls.

Multiple card connector Clemsa for use in the manufacture of motor vehicles Clemsa with exits from connection 4 pins + 6 pins.

Make any control panel with a 6-pin receiver card socket accessible over the Internet, with the system CloudFort. What. Actionable via App or web.

The MICRAC PLUG receiving card it's one of many devices we can find for the platform CloudFort, which it will allow us to operate our automatism remotely or automatically creating automated routines by time uses.

Plug-in receiver card by 6 pin connection, free code RollingCode at 433.92 MHz. What. Capacity up to 255 codes.

Compatible with most receiver cards; JCM, Erreka, Pujol, HyDOM, Forsa, Terra, and so on

Includes 2 PC ROLL A4 code issuers Pujol.

1 channel controller for tubular motor blinds, which replaces mechanical switches. With touch buttons and system control CloudFort.

The 1 channel MICRAC HOME-R button it's one of many devices we can find for the platform CloudFort, which it will allow us to operate our tubular motor, screen or curtain remotely or automatically creating automated routines by time uses.

Other, of circular cross-section Beninca ONE.2WI 433,92 MHz of 2 channels with triple coding: Advanced rolling code, rolling code and fixed code.

Ability to memorize up to 512 codes. Learning the coding after the first transmission with the transmitter.

Universal receiver card 433,92 MHz compatible with keeloq type issuers with connector of 6 pins.

Compatible with manoeuvring charts: JCM, AERF, EREKA, PLEASE, among others

Receiving card BFT This is CLONIX 2 RollingCode 433 MHz.

Two-channel receiver with evolution code 433 MHz with capacity for 128 transmitters.

The power is 24Vac through the maneuver box.

Other, of circular cross-section Aprimatic RX2MR, compatible with most maneuver frames with receiver connection and compatible with the former RX1 receptor.

Plug-in receiver card EMFA TR255 MINI 433 MHz.

Other, of circular cross-section Aprimatic RX2R for Apricode paintings.

ROGER H93/RX22I radio receiver 2-channel fixed code plug-in 433.92 MHz (500 memorizable codes) for H70, B70, EDGE, CTRL and F70 series control stations.

The MT-23 is a receiver that is automatically tuned to remote control frequency without the need to select the frequency by dip-switch.

It works with fixed and evolutionary code commands simultaneously.

The receiver is tuned to a single Frequency.

Plug-in receiver card by 6 pin connection, free code RollingCode at 433.92 MHz. What. Capacity up to 255 codes.

Compatible with most receiver cards; JCM, Erreka, Pujol, HyDOM, Forsa, Terra, and so on

The forklift has two mach connectorsor to connect two 6-pin plug-in receiver cards, ideal for parallel installation while maintaining the existing receiver card.

The bifurcator is compatible with manoeuvring frames having a 6-pin socket: JCM, AERF, EREKA, among others.