Tubular transmitters & accessories

The Vivaldi Timer TX5 CAME It is a remote control with programmable timer Of 5 channels that serves to automate radio motors according to schedules.

This device allows a motor to move without the user press the knob.

Snow sensor, sun, rain and wind with wireless communication, to be installed at greater distance.

It is an exclusive and multifaceted sensor for the Bioclimatic Solar Breeze pergola. It allows to guarantee security and prevent breakdowns and product damage.

The sensor sends an order opening when it detects snow or wind, or send a closing order When it detects water.

Nice Domip1 | Transmitter for blinds and awnings

The Nice Domip1 is a radiofrequency transmitter of a channel Which is part of the Domi series, designed To control blinds, awnings and other brand automations Nice. This model, released in December 2024, replaces the oldest models was P1 and Ergo1.

Accessory Motorline Mts01 To adapt crank MTS04 to the engine.

Accessory Motorline MTS041 To adapt crank MTS04 to the engine.

Domì P6SV is a 6-channel portable radio transmitter for tubulent shutters and brand awning engines Nice.

Receptor CAME RKLT-W50 for mechanical tubular motors up to 50 Nm and 500 W.

Radio transmitter Nice ERA P VIEW multifunction with intuitive graphical interface, to manage up to 99 teams individually or in groups.

Era P View is a multifunction radio transmitter belonging to the “Era-P” family Nice; is intended to command automations for awnings, solar screens, blinds, gates and gates, lights and electrical appliances in general. In addition, it serves to activate and deactivate the Home System alarm system Nice.

Bidirectional radio transmitter Nice 3-channel Wall Domì W3C

Transmitter ALLMATIC CLARUS RollingCode 433 MHz

ALLMATIC CLARUS transmitters are available in 1, 6 or 12 easy-to-use and intuitive channels for home shutters.

Module for the operation of 1 automatic open-stop-close in single or multi-group mode.

Fast coupling clutch V2 In the case of engines with a rated torque of not more than 20 Nm (for LEX, LEX-RM, LEX-FE, LEX-RFE).

Vibration anemometric sensor, whether or not combined with other instruments V2 SYROCO-RS, system by radio (434.15 MHz).

Anemometer with sun and temperature sensor V2 TYPHOON rADIO signal and powered by solar cells, for tubular blinds and awnings.

Anemometer with sun and temperature sensor V2 Hurricane-RS radio signal, for tubular blinds and awnings.

Anemometer with sun and temperature sensor V2 Signal hurricane by cable, for tubular blinds and awnings.

Cable-based signal anemometer V2 MISTRAL for automatic tubular blinds or awnings.

Transmitter FAAC TM2 POP7 Frequency 433 MHz.

The transmitter has seven channels.

Transmitter FAAC TM2 POP1 Frequency 433 MHz.

The transmitter has one channel.

Outer receiver FAAC TM2 Compact for the TM2 POP range of transmitters.

Control of household blinds Somfy Situation Pure II unidirectional 1 channel at 433,42 MHz.

Other, of circular cross-section CAME MONDRIAN 4

Plaque with Cross mark CAME MONDRIAN 4

Central Motorline MC4 EVO developed for TUB and ROLLING roller motors up to 750W, with technology to be powered from 100Vac to 230Vac.

Its small size allows it to be installed in smaller spaces and with screwless connectors to increase speed and ease of connection.

Issuers V2 LOKI Tube engines for domestic blinds and awnings.

Issuers V2 PROTEO for tubular motors for domestic blinds and awnings.

Other, of circular cross-section CAME MONDRIAN FIVE.

I command Aprimatic 5 channel Revolux Wireless for tube or pipe engines series Aprimatic The Revolution.

Transmitter CAME ELVIS 433.92 MHz with one channel in white.

Allows control and management of tubular motors CAME for blinds and awnings.

Control panel with built-in 433.92MHz receiver for SENA-C and SENA-CM models.

Quick support Erreka SENA-C for compact drawer.

2 channel remote control Somfy model Keytis 2 RTS for garage doors and frequency cancellation Rollingcode 433,92 MHz.

4 channel remote control Somfy model Keytis 4 RTS for garage doors and frequency cancellation Rollingcode 433,92 MHz.

Central Motorline MC70 230Vac for TUB and Rolling motors up to 500W.

Transmitter CAME WAGNER 1 channel 433 MHz for tubular motors for domestic blinds or awnings.

Transmitter CAME 5 channel 433 MHz WAGNER for tubular motors for domestic blinds or awnings.

Wall transmitter CAME VIVALDI TX1 for internal shutters, stencils and awnings of the KLT series.

The transmitter is wireless powered by a 3V stack, and has a base which can be screwed to the wall.

Wall transmitter Came model Vivaldi of 2 channels for tubular motors.

I command Aprimatic Revolux Wireless with one channel for tube or pipe engines series Aprimatic The Revolution.

Wi-Fi module to control from anywhere and in a simple way, all automated devices MOTORS, TOLDOS, LIGHTS, by means of the ART range of CAME.

Transmitter FAAC TM XT1 433MHZ one channel for tubing motors for household blinds.

Hexagonal curved axle of 60 mmfor tubular domestic blinds.

Support bolt CAME THE FOLLOWING PARAGRAPH IS ADDED: for tubular motors with a diameter of 35 mm.

I command Motorline MX95N 1 channel with an innovative and functional design, with support included.

I command Motorline MX96N 5 channel with an innovative and functional design, with support included.

I command Motorline 15 channel MX97N with an innovative and functional design, with support included.

Support for mounting curtains / blackouts on tubular motors Motorline 35 35mm.

Mounting accessory for compact shutters on tubular motors Motorline 45 45 mm