KIT Batteries FAAC A952 with charger.

KIT Connection Card and Battery Charger ROGER for digital controller Brushless B70/1DCHP - B70/1THP - EDGE1/BOX to 36Vdc.

The set includes plastic housing and capacity to place 2 batteries from 12V to 4.5Ah.

Kit Batteries for sliding motors Motorline GALO. Includes fixing sheet to place the battery in the engine.

KIT 24V battery charger Erreka CHG01.

Battery kit with integrated charger BFT BAT-associated emission levels for emissions from combustion plants.

The quick and easy-connect battery backup kit allows the operator to work when the electrical current at 230V is lost. The 24V battery backup system can be installed in the motors BFT in the case of products of the series DEIMOS BT A, DEIMOS ULTRA, ARES BT A, ARES ULTRA.

The charger will be responsible for recharging the batteries when they lose their charging capacity.

2 battery pack 12Vdc/2.2Ah for motor Motorline THAT'S GOOD.

Kit Batteries sliding motor Pujol The Mini Marathon 24V.

Emergency battery with built-in battery charge for engines V2 Ayros and Alfariss.

26Vdc/2Ah Li-Ion battery with 50cm connection cable. It includes protection of load and discharge voltage and protection against short circuits.

The PS124 battery from Nice is intended for use in 24V automation of garage doors and gates, which use command centers Nice. What. It is compatible with the ROBUS, WINGO, POP and SOON engines.

The battery provides emergency power to an automation when the power supply fails (black-out). When the battery is charged it can guarantee the automation an autonomy of about ten manoeuvres. Further characteristics are described under Technical characteristics of the product”.

For the purposes of this Regulation, the following definitions apply:

Saft AA lithium batteries for industrial and commercial applications. These AA batteries are not like conventional AA batteries. They have a rated voltage of 3,6 V and can be used in applications where the device must operate for a long period of time such as meters, alarm systems and safety devices.

The LS14500 batteries use lithium thionyl chloride, which gives them a high energy density and a low discharge rate, ideal if they are to be stored for long periods. In addition, they comply with the safety standards IEC60086-4 and IEC60079-11.

Batería Nice PS324 de 24V con cargador de baterías integrado exclusivamente para motores a 24Vdc.

Es compatible con las centrales Nice Moonclever MC824H y MC824HR, proporcionando alimentación de emergencia en caso de fallo en el suministro de la alimentación eléctrica.

Tarjeta para cuadros CAME ZL65 para el funcionamiento en caso de falta de suministro eléctrico y para recargar las baterías.

Safety battery kit 2 x 2.2Ah for the VIVO-D203 box.

Module V2 Low energy to save electricity for CITY1-EVO and CITY4-EVO boards.

Kit of two PC170 batteries at 12V & 2,2Ah for the Medva PW series throttle motors.

7 Ah battery kit for FT210/FT210B transmitters, for intensive use.

2 Ah battery kit for the FT210/FT210B transmitters.

High quality 12Vdc/7Ah battery which guaranteed the reliability of power systems such as UPS, and emergency power in engines and alarm systems.

Compact battery of 24 Vdc/1.3 Ah

Charger kit with 2 batteries 12Vdc/2.2Ah with case for 24V motors

Box battery 24V Nice PSY24 with control circuit and transport handle, intended for use with the Solar Solemyo KIT.

The PS224 battery from Nice is intended for use in 24V automation of garage doors and gates, which use command centers Nice. What. It is compatible with the ROBUS, WINGO, POP and SOON engines.

The battery provides emergency power to an automation when the power supply fails (black-out). When the battery is charged it can guarantee the automation an autonomy of about ten manoeuvres. Further characteristics are described under Technical characteristics of the product”.