A magnetic loop is ideal for detecting vehicles. The equipment consists of a base plate containing the output relays and a card that is the magnetic detector. Loop input to the detector protected against surges. Automatically reset.

Machinery for making pulp of fibrous cellulosic material Clemsa, to detect vehicles (cars or motorcycles) when that vehicle passes over the door, it reverses the maneuver just as if we were passing in front of a photocell. A magnetic loop is also usually installed to prevent an owner from opening the door to enter on foot, therefore the door would only open if the magnetic loop detects a vehicle in the area where the winding is installed (usually in the buried ground).

Presence detector Allmatic A1H-U for detecting the presence of vehicles, 1 relay at 12/24V.

Magnetic burial spiral for vehicle detectors. what. available in two versions:

• Spire to bury, cable to 2x1, 20 m in length.
• Spire to bury, cable to 3x2, 20 m in length.

It's compatible with all brands of presence detectors.

Magnetic detector Forsa highly accurate which is connected to a coil which detects the presence of vehicles

(metallic masses) in a predetermined area.

L JDM vehicle magnetic loop detector Erreka for 1 or 2 loops, mainly used to detect vehicles, with 2 two-way relay outputs.

The LDD loop detector can be installed in most parking, traffic and vehicle access control applications for the control of barriers, doors, bollards and vehicle access equipments . Automatic frequency tuning and simple sensitivity adjustment provide easy setup and installation. The automatic increase in sensitivity ensures reliable detection of tall vehicles.

The indication Multicolored LED allows the user to easily adjust the inductance and indicates installation problems intuitively for easy diagnosis. The user individually assigned relay mode for 2 SPDT outputs provides easy adaptation to a multitude of applications. The directional logic in the double loop version can be used

Magnetic device which is joined by a spiral allows detection of metallic masses in the transit zone. After identifying the mass, such as a car or motorcycle, the detector sends the signal to the control unit.

Machinery for making pulp of fibrous cellulosic material V2 VEK for detecting the presence of vehicles with sensitivity setting, models with 1 or 2 relays.

Magnetic loop detector Erreka IBUC (Carlo Gavazzi) What is it in 230Vac of measurements 80x40x79 mm, available for 1 or 2 loops.

Magnetic sensors CAME SMA for the detection of metal masses.

We introduced a new concept of wireless vehicle detection. What. The system e-Loop replaces traditional wired inductive loops, saving time and money it also increases reliability.

Installation in 3 easy steps

1. Encode the e-Loop
2. Fix the e-Loop to the driveway
3. Calibrate the e-Loop... and it'll be up and running in less than 15 minutes

It saves many hours of installation time compared to wired loop systems.

Magnetic ground spindle Motorline MD150 for vehicle detection and automatic opening of barriers or doors.

The ground magnetic spiral is useful for accurately detecting the presence of metal objects, such as cars and trucks, even when vehicles are not in motion.

The SEMLED traffic light is a signalling element powered at 230Vac, ideal for motorized door installations. By lED coloured lamps (red and green) indicates whether or not it is convenient to go through the door.

Plug-in traffic light card with standard connector a width of not more than 50 mm AERF (including Hydom, DEA, Medva, among others).

Table of manoeuvres V2 CITY5 230V digital for the management of a traffic light installed near a vehicle crossing with a two-way direction of travel.

Small size traffic light Erreka LLSD in two colours red/green and powered at 230 V to signal motorised door installations. Coloured lights indicate whether or not it is convenient to go through the door.

Traffic signalling system by means of a traffic light with an integrated receiver which changes from green to red by remote control.

LED traffic light Clemsa two red and green lights or amber with a 120mm lens diameter of 25 LEDs. It is ideal for signalling the passage of vehicles or people.

Asemgay is a device whose function is to discriminate calls used to manage traffic lights. What. It's housed in the control panel of the automatic doors.

Central Motorline MCS01 developed to work together with traffic control lights in narrow two-way places, such as entrances and exits of garages, tunnels or bridges.

Traffic light Motorline MS01 red-green LED colours which can be managed by MCS01. It has green/red LED lamps and the lenses are 124 mm in diameter. Rotate 200° and allow in M20 cables.

LED traffic light Celinsa three colours (red-amber-green) adjustable with supports included.

Traffic management box Celinsa to regulate and control the passage of vehicles.

LED traffic light Celinsa 2 colours (red-green) adjustable with supports included.

Three-colored LED lights Red/Verde/Amber Motorline for automatic door control thanks to the MCS01 compatible power station.