Sommer sliding engine Starter S2 + 24V for residential doors up to 400kg, magnetic career end, with Starting and soft stop For progressive operation in the door maneuvers. Incorporate RECEPTOR TABLE FM 868.95 MHz Somloq2 and function of Intelligent obstacle detection For maximum security.

KIT SOMMER STARTER S2+ 24V for residential doors up to 400KG, magnetic race end, with boot and soft stop for progressive operation in the maneuvers of the door. Incorporates maneuvers with receiver FM 868.95 MHz SOMloq2 and function intelligent detection of obstacles for maximum security.

Sommer Starter S3 + drive for sliding doors up to 400 kg (residential use), designed to offer fast, soft and safe maneuvers in small and medium-sized doors.

The range Starter S3 + Combine intelligent control with a modern radio system Somloq2 (868.95 MHz), low consumption at rest and a construction prepared to run outdoors (Ip54). The version S3 + It stands out for its greater door capacity, more tour and a higher opening speed.

Sommer Starter S3 + drive for sliding doors up to 400 kg (residential use), designed to offer fast, soft and safe maneuvers in small and medium-sized doors.

The range Starter S3 + Combine intelligent control with a modern radio system Somloq2 (868.95 MHz), low consumption at rest and a construction prepared to run outdoors (Ip54). The version S3 + It stands out for its greater door capacity, more tour and a higher opening speed.

Motor for residential sliding doors (version 230V), or semi-intensive use (version of 24 V). 400, 600 or 800 kg version.

Electromechanical engine Forsa SATURN at 230 V for residential sliding doors up to 1000 kg

Electromechanical engine Forsa SATURN at 24 V for residential sliding doors up to 1500 kg

KIT engine Motorline BRAVO524 at 24Vdc with oil and grease lubricated reducer for sliding doors up to 500kg and IP44 protection.

KIT engine Motorline BRAVO500 at 230Vac with oil and grease lubricated reducer for sliding doors up to 500kg and IP44 protection.

Brushless engine Motorline Gallo 36V, brushless, Super intensive use to motorize sliding doors that require access with high vehicle traffic.

High performance and speed 36VDC engine, for slide gate of up to 2200kg (4 Versions available).

The absence of brushes and the box Lubricated gears guarantee superintendent use With high performance.

Roger Brushless Sliding Engine 400kg 24V (without brush) with mechanical race end (BM30 / 403) or End of Magnetic Race (BM30 / 304 / HS) and B70 series built-in digital maneuvering box.

The kit contains plug-in receiving card and two Roger E80 emitters.

ROGER 400KG 230VAC Sliding Motor Kit with magnetic career end and H70 Series built-in digital maneuvering box.

Roger M30 / 324 Motorreductor Electromechanical irreversible 230VAC for cancels up to 400 kg for residential use, optical encoder, built-in H70 series digital frame, and End of Magnetic Race.

The kit contains plug-in receiving card and two Roger E80 emitters.

Irable Electromechanical Medium Motor SL SL Irreversible Electromechanical Medium for community or industrial sliding doors for intensive use. Incorporates Maneuver box, MR2 Plug-Up receiver, 2 433MHz and Magnetic career endings.

Available in 24V and 230V version.

SOMMER RUNNER + sliding motor kit for residential doors Up to 800kg with magnetic career finishes, with Starting and soft stop For progressive operation in the door maneuvers. Incorporate RECEPTOR TABLE FM 868.95 MHz Somloq2 and intelligent obstacle detection function for maximum security.

In the kit, 1 transmitter 4018 FM 868.95 MHz is included, 4 meters of nylon zip and foundation base.

Engine sliding Nice Robus RBS600 (up to 600kg) irreversible, 24 VDC, Magnetic race end, Integrated radio receiver control unit, Compatibility with optional backup battery (PS124).

Efficient and safe: Functional mechanical design and high-performance materials.

Unlocking lever easy to drive and secure; magnetic, Simple installation and it allows reducing the length of the zipper.

Easy to program, Thanks to the MyNice Pro App, connecting the pro-view control unit or the bidi-wifi.

Engine sliding Nice Robus RBS400 (up to 400kg) Irreversible, 24 VDC, Magnetic Race End, Integrated Radio Receiver Control Unit, Compatibility with optional backup battery (PS124).

Efficient and safe: Functional mechanical design and high-performance materials.

Unlocking lever easy to drive and secure; magnetic, Simple installation and it allows reducing the length of the zipper.

Easy to program, Thanks to the MyNice Pro App, connecting the pro-view control unit or the bidi-wifi.

Irable Electromechanical Large Motor SL For heavy industrial doors. Incorporates maneuver box (without receiver) and Magnetic career endings.

Available in 230V and 230V version with Inverter technology.

Irable Electromechanical Medium Motor SL SL Irreversible Electromechanical Medium for community or industrial sliding doors for intensive use. Incorporates maneuver box (without receiver) and Magnetic career endings.

Available in 24V and 230V version.

KIT engine DEIMOS BT A600, operator for sliding doors of up to 600 kg. What. Blade speed is 12 m/min. End of the electromechanical race.

Motor kit CAME BXV10AGS at 24 V for sliding doors up to 1000 kg both residential and communal.

Range of operators BFT model DEIMOS BT, 24V power supply for residential sliding doors up to 400/600 kg with electromechanical running ends.

a

The new FORT engine of Motorline it is an automation that can be applied in doors up to 400kg. What. It is a motor in the form of a column with a built-in RGB flashlight at its top, informing the status of the door maneuver.

Engine Pujol Marathon DC at 24V with M4 pin for sliding doors up to 700 kg for residential, community or industrial doors.

Sliding engine Motorline Manufacture from materials of any heading, except that of the product very heavy.

Developed and produced in Portugal, STARK is available in 3 versions, 4000Kg, 6000Kg and 8000Kg at 230Vac or 400Vac. What. More compact and modern, it also has quality mechanics, making it an elegant and reliable engine.

Engine Nice Slight with integrated control unit and absolute encoder for sliding doors up to 400 kg and 6 m in length.

KIT engine BFT ARIES ULTRA BT A1000, 24V operator for sliding doors up to 1000 kg with a blade speed of 9 m/min. End of magnetic race.

KIT engine Nice Slight with integrated control unit and absolute encoder for sliding doors up to 400 kg and 6 m in length.

Engine Nice RUN 1500 24V for residential sliding motors up to 1500 kg. What. Versions with electromechanical running end (RUN1500) and with inductive running end (RUN1500P).

KIT Sliding engine Nice ROAD 400 24V ideal for residential sliding doors manoeuvre chart SPRBA4R10 with built-in receptor and the race finals are mechanical. It has a smooth stopping when opening and closing the door.

Content of the KITThe following: ROAD 400 sliding motor, FLOR2RE emitters, EPM photocell, and four feet of nylon zipper.

Engine Aprimatic Wave 724 to 24V for sliding doors up to 700 kg. What. Ideal for residential doors of intensive use.

Operator at 24 Vcc for sliding doors up to 700 kg. Intensive use. It incorporates the maneuver board, with anti-crush system to reverse the maneuver in case of detection of obstacles. Personalized lock unlock in case of power failure.

Engine Aprimatic Wave 1024 to 24V for sliding doors up to 1000 kg.Ideal for residential doors of intensive use.

Operator at 24 Vcc for sliding door up to 1000 kg. Intensive use. It incorporates the maneuver board, with anti-crush system to reverse the maneuver in case of detection of obstacles. Personalized lock unlock in case of power failure.

Engine Nice RUN 1800/2500 kg of 230 V Irreversible for sliding doors with built-in control.

Self-ventilating motor with in the case of vehicles of categories M1 and N2 with a maximum mass exceeding 2000 kg: and with the electromechanical end of run (RUN1800/RUN2500/RUN2500I).

Engine Nice ROBUSKIT 400 BD 24V with two-way emitters for residential sliding doors up to 400 kg.

Engine Nice ROBUSKIT 600 BD 24V with two-way emitters for residential sliding doors up to 600 kg.

Electromechanical engine EMFA 230 V CU for residential sliding doors 500 kg, 800 kg or 1500 kg equipped with mechanical race ends.

Electromechanical engine Clemsa AC14C (up to 1400 kg) and AC20C (up to 2000 kg) for industrial doors with built-in magnetic track terminals and centre.

Motor kit CAME BKV15AGS at 36 V for sliding doors up to 1500 kg both residential and communal. Includes graphics card, Adaptive Speed & Torque Technology, 4 safety inputs, movement management and obstacle detection.

Engine Beninca 24V heavy duty KPONY for residential doors up to 400 kg with built-in box receiver and anti-crush system.

Engine FAAC 746 E R for residential sliding doors up to 400/600 kg with magnetic running ends and anti-crush system.

KIT Sliding engine Beninca BULL424ESA heavy duty 24Vdc for residential doors up to 450 kg. What. Incorporates receiver and encoder maneuver board.

OXYGEN ARTEMIS 230V sliding motor for residential sliding doors up to 800 kg, with built-in receiver box.

The 230V electromechanical ARTEMIS motor is thought to power light or heavy doors up to 800 kg for residential use.

Engine FAAC 844 E R for industrial sliding doors up to 1 800 kg with magnetic running ends and anti-crush system.

OXYGEN NYX 230V motor for residential sliding doors up to 1,000 kg, with built-in box-receiver and mechanical racing ends.

The 230V NYX electromechanical motor is thought to power light or heavy doors up to 1,000 kg for residential or industrial use.

Engine EMFA EXPY electromechanical 230V for residential sliding doors up to 600/800 kg. It 's incorporated receiver maneuver box 433 MHz, encoder and anti-crush system.

OXYGEN ARTEMIS 230V sliding motor for residential sliding doors up to 800 kg, with built-in receiver box.

The 230V electromechanical ARTEMIS motor is thought to power light or heavy doors up to 800 kg for residential use.

Sliding engine EMFA "COMEC 20 HE' for industrial doors up to 2000 kg. Version electromechanical 230Vac with built-in display. The COMEC 20 HE engine has the oil bath gearbox, prepared for intensive use and self-ventilated.

KIT Electromechanical engine 230Vac Erreka RINO for sliding doors, with built-in panel, ideal for installation in residential, community or industrial doors.