Sliding engine BFT "DEIMOS ULTRA BT A" 24V electromechanical for charges of up to 400/600 KG with intensive use and magnetic run ends.

KIT Sliding engine BFT "DEIMOS ULTRA BT A" 24V electromechanical for charges of up to 400/600 KG with intensive use and magnetic run ends.

High speed motor BFT "ICARO VELOCE SMART AC A' 230V for sliding doors of very heavy use up to 1000 and 2000 kg.

Engine CAME BKV 36Vdc for heavy sliding doors of 1,500/2,000/2,500 KG with heavy use.

KIT Motor Came BK-1800 from 230V for sliding doors of up to 1,800 kg and up to 20 metres in length. What. It incorporates electronic card with programming display, built-in radio decoding and mechanical race endings.

The Sprint Low is a 24V electromechanical motor that includes a gearbox and receiver for 255 emitters. What. For residential or communal sliding doors.
It is manufactured with the highest quality products and is undoubtedly the fastest automation on the market in its placement in sliding doors as it lacks exact quotas, and thanks to its pivot pin , it always fits the zipper.

Engine DEA LIVI in the 230V version for sliding doors for residential use of 400kg, 600kg, 800kg and 900kg.

Engine Nice RUN HS for the rapid actuation of switches for use in the manufacture of motor vehicles 1.200kg.

Rapid opening and closing maneuvers: RUN400HS opens a 4 m canopy in approximately 6* seconds, while RUN1200HS opens a 7 m canopy in approximately 18* seconds.

Non-reversible electromechanical motor Nice TUB 400Vac for sliding doors industrial use up to 4000 kg.

Engine DEA REV in 230V and 24V version for sliding doors of community use up to 1400 kg.

The REV series engines are equipped with a 433 MHz integrated receiver gearbox and electromechanical or magnetic terminals.

Engine DEA GULLIVER for use in the manufacture of motor vehicles machinery for making pulp of fibrous cellulosic material.

KIT engine DEIMOS BT A400, operator for sliding doors of up to 400 kg. What. Blade speed is 12 m/min. End of the electromechanical race.

Motor gearbox Aprimatic Wave 400 to 230 V, use in individual residences up to 400 kg. What. Built on a sturdy aluminum monoblock injected and oven lacquered with special outdoor epoxy resin. It has a precise encoder that facilitates maximum control over the speed, strength and position of the door. Incorporates maneuver chart easy start-up with self-learning of the basic working parameters. Transmission consisting of endless steel screws and bronze crown obtaining a door movement soft, quiet and very reliable.

KIT engine Motorline SLIDE1024 to 24V with oil and grease lubricated reducer for sliding doors up to 1,000kg heavy duty and IP44 protection.

Motor gearbox Forsa BOXER 230Vac up to 1000 kg oil bath for sliding doors of heavy use.

KIT Motor for sliding door Erreka PUMA INVERTER, at 230Vac for residential use up to 400 kg, with magnetic end run and obstacle detection.

Engine FAAC model C721 with 24V operation for light residential and communal sliding doors of up to 800 kg.

Engine Clemsa for use in the manufacture of products falling within heading 8471 (AC424N) or 800kg (AC824N), with built-in control panel.

Electromechanical motor of 24 V dc MEDVA PL500 for sliding doors of residential use up to 500 kg with built-in receiver box and 2 RollingCode controls.

Electromechanical motor of 24 V dc MEDVA PL1000 for sliding doors of residential use up to 1000 kg with built-in receiver box and 2 RollingCode controls.

" THE PRODUCT HAS BEEN DISCONTINUED BY THE MANUFACTURER . WE RECOMMEND YOU CHECK OTHER ENGINES IN OUR SLIDING ENGINE CATEGORY "

Range of 24 V operators for heavy duty sliding doors with blades up to 1500 kg. What. Magnetic race terminals and command centers compatible with the U-link communication protocol.

Sliding engine oil bath traffic for sliding doors of industrial use and maximum weight other. 

KIT engine Pujol Marathon PRO Q II single phase for sliding doors up to 1000 kg residential, community or industrial. Equipped with electronic board and built-in receiver.

KIT Motor Came BK-1200 from 230V for sliding doors of up to 1200 kg and a length not exceeding 20 metres. What. It incorporates electronic card with programming display, built-in radio decoding and mechanical race endings.

Engine EMFA COMEC 24V electromechanical DC with built-in receiver box 433,92 MHz for automating sliding doors for residential or industrial use with heavy use.

Irreversible 24Vdc motor with integrated control centre and absolute encoder, installed internally in a column of small dimensions, properly drilled.

The first engine Nice slippery for sliding doors up to 400 kg and a blade length of up to 6 m.

Sliding engine Nice ROAD 400 24V ideal for residential sliding doors manoeuvre chart SPRBA4R10 with built-in receptor and the race finals are mechanical. It has a smooth stopping when opening and closing the door.

Motor kit FAAC 740 EZ16 to 230V for residential sliding doors up to 500 kg.

Engine Nice Robus 400/600/1000 kg at 24V For residential sliding doors with versions for electromechanical career purposes (RB6010 and RB1000) and for inductive career purposes (RB600P and RB1000P).

High speed NICE ROBUS HS sliding motor for fast drive other, of circular cross-section up to 250 kg (RB250HS) and 500 kg (RB500HS), for doors for residential or industrial use.

KIT Motor PUJOL MINI MARATHON for residential sliding doors up to 400 kg. It includes a 4-meter zipper pack and 2 VARIO4 transmitters at 433.92 MHz.

The MINI MARATHON model is a single-phase electromechanical 24V with manoeuvre box and built-in receiver at 433,92 MHz. What. It's a very quiet equipment ideal for semi-intensive use for residential cancellations.

Prepared with module of M4 zipper pin. Unlocking with lever for manual operation. What. Patented tilting restraint system, which absorbs the deformations of the door and makes the assembly easy.

PUJOL MINI MARATHON engine for residential sliding doors up to 400 kg.

The MINI MARATHON model is a single-phase electromechanical 24V with manoeuvre box and built-in receiver at 433,92 MHz. What. It's a very quiet equipment ideal for semi-intensive use for residential cancellations.

Prepared with module of M4 zipper pin. Unlocking with lever for manual operation. What. Patented tilting restraint system, which absorbs the deformations of the door and makes the assembly easy.

Optional emergency battery kits (not included) allowing a range of 40 manoeuvres without power supply.

Engine Pujol Marathon PRO Q III three-phase for sliding doors up to 2000 kg residential, community or industrial. Equipped with electronic board and built-in receiver.

Engine Pujol Marathon PRO Q II single phase for sliding doors up to 1000 kg residential, community or industrial. Equipped with electronic board and built-in receiver.

Engine Erreka 24V DINGO designed for light residential sliding doors up to a maximum of 400 kg. Adaptive pinion to fit any type of zipper.

Engine Erreka 24V DINGO designed for light residential sliding doors up to a maximum of 400 kg. Adaptive pinion to fit any type of zipper.

The Sprint Low is a 24V electromechanical motor that includes a gearbox and receiver for 255 emitters. What. For residential or communal sliding doors.
It is manufactured with the highest quality products and is undoubtedly the fastest automation on the market in its placement in sliding doors as it lacks exact quotas, and thanks to its pivot pin , it always fits the zipper.

Motor for sliding doors Erreka PUMA INVERTER, at 230Vac for residential use up to 400 kg, with magnetic end run and obstacle detection.

Engine Erreka LINCE at 24Vdc for residential sliding doors up to 650 kg with electronic obstacle detection and end of race (encoder).

Electromechanical engine Erreka RINO 230V for sliding doors ideal for automating residential, community or industrial environments. Designed with state-of-the-art technology, this engine delivers optimal performance, guaranteeing safety, comfort and durability in each use.

Thanks to your capacity to motorize doors up to 1,000 KG, ERREKA RINO is perfect for doors of large dimensions of semi-intensive use. Its robust and compact design ensures a silent and efficient operation, even in adverse weather conditions. In addition, it has high quality components that reduce wear and maintenance, prolonging his life.

The ERREKA RINO engine includes an advanced security system detection of obstacles and automatic stop, protecting both users and the structure of the door. Its installation is simple, and its configuration allows to integrate accessories such as remote controls, sensors or photocells.

Engine Erreka TORO for heavy residential, community or industrial sliding doors up to 1800 kg or 2500 kg with programmed cruising and deceleration, easy unlocking and magnetic race ends.

Engine Erreka LINCE to 24Vdc for residential sliding doors up to 650 kg with electronic obstacle detection and end of run (encoder).

Motor kit FAAC C720 (up to 400 kg) or C721 (up to 800 kg) heavy duty 24V for residential and community sliding doors.

Engine FAAC model C720 with 24V operation for light residential and communal sliding doors of up to 400 kg.

Motor kit CAME BXV06AGS at 24V for sliding doors up to 600 kg both residential and communal.

KIT Sliding engine Clemsa "AC562N" electromechanical 230 V for residential doors up to 500 kg. It incorporates a manoeuvre chart CLAS62C. The actuator has magnetic running ends, levered unlock system, aluminum body painted with polyester powders and ABS crankcase. in addition, thanks to its anti-crush system and smooth stopping we will have an engine with reliability and maximum precision.

Engine EMFA 24V SKYLINE model, for residential or industrial sliding doors up to 600 kg. This equipment has a system that allows the pinion to oscillate and adapt to the irregularities of the zipper, even at gradients of up to 35 mm.

KIT engine Motorline SLIDE800A at 230V with oil and grease lubricated reducer for sliding doors up to 800kg semi-intensive use and IP44 protection.