Pair of transmission axes 20x20 mm, length 1500 mm for tilting motor Nice Ten.

Motor support Nice Ten in length 520 mm.

Kit guide chain shot Pujol P-La (3 meters + knob)

AU.65 fixing base Beninca Length ZED 650mm

Pair of transmission shafts 20x20 mm, length 200 mm for tilting motor Nice TRY.

Pair of standard telescopic straight arms for tilting motor Nice TRY.

Transmission device for a couple of motor shafts Nice TRY.

External unlock mechanism to be able to discard the BERMA SEB R tilting engine on the outside in case of lack of the electric current.

Hydraulic oil radial gasket in 2 liters for manufacturer's whirlwind engines EMFA MAP.

Nylon/PVP basting doors brushes.

Ø6mm tube spike for whips HYDOM.

Hydraulic oil Aprimatic AF32 (APRIMOIL) of 1 litre for reciprocating or hydraulic motors.

Cylinder running 20 Hydom.

For the purposes of this Regulation, the following definitions shall apply:.

Fixing bench or rack FAAC 550.

Hydom Minimax bearing for Saxo and Pleleva hardware.

Saxo Hydom Minimax wheel drive.

Hydraulic whip EMFA meters with its racors designed for swinging and swinging doors.

KIT CA HOME kit of two trailing hoods MEDVA HOME to weld on bars.

Harness Saxo tilting engine FAAC 580

Hydraulic oil Clemsa/FAAC in a 2-litre bottle.

Floor central enclosure for tilting doors of 1 sheet Erreka NPE307

Other, of circular cross-section EMFA B45 for electro-mechanical engine ROT MEC.

KIT End of the race DEA LIVI 902/905 for electromechanical tilting motors.

HYDOM lathe of 1.4 m for the MINIMAX and ROTOR-UNIC engines.

Telescopic harnesses and torsion bars Forsa I MEAN, ERG.

Unlocking piston BFT BERMA for hydraulic motors with tilting doors.

Set of lock and whip designed for the servo motors BERMA SA and BERMA SAR. What. The device may be applied to tilting doors with vertical guides, overlapping and non-overlapping tilting doors and articulated leaf tilting doors.

Hydraulic lock assembly FAAC 580 SB/P with 1-meter whip.

Hydraulic whip MEDVA 6 mm spindle ends and 1400 mm length.

Support or mounting plate Medva CS HOME with anchor bolt.

Support or mounting plate Medva CS HB1 C+P with anchor bolts.

Pair of transmission pipes FAAC 580, side brackets for single-engine installation.

External unlocking FAAC 550 for application in existing handles.

Motor mounting bracket or plate FAAC 580.

This support is what is placed on the door and on it is placed the hydraulic motor.

Parts and accessories of machinery FAAC 580, square format.

Telescopic arms, straight reinforced, with a grooved motor housing DEA The following information shall be provided to the competent authority:.

A pair of straight telescopic arms FAAC 580.

Pair of tubes FAAC 580 ZINC transmission with welded casing and bracket.

Telescopic straight arms BFT CAS1 for tilting operator BERMA.

• Telescopic pair length 1000 mm
• Machinery for making pulp of fibrous cellulosic material 2x2000 mm

Parts and accessories FAAC 550 (length 1,5 m), with side support for motor installation FAAC 550 with telescopic rods.

A pair of straight telescopic arms FAAC 550/593.

Curved telescopic sights for FAAC 550/593.

Traction parts with square 20 for Hydom ROTOR-UNIC engine.

He's thinking about the old model rotor engine with a "square" casing so he can adapt it to the new hardware.

Hydraulic oil of the brand BFT for tilting and swinging motors. Pack size of 2 litres.

Striped housing Ø 21.2 mm with M6 housing.

Pair of L. 1500 mm with striated casing Ø 21.2 mm welded and galvanized, with attachment (side mount).