RFID duplicator for 125 Khz proximity keys

The TP-RFID duplicator allows us to duplicate the vast majority of RFID proximity keys on the market that work at 125 kHz.

The copy is made in a matter of seconds by making an exact clone of the key read so as not to have to register it in the installation.

Electronic proximity key free hands Intratone Mifare, with stainless steel insert.

Hands-free proximity reader with remote access control for automatic or pedestrian doors, with hands-free openings thanks to its high-powered locks, allowing us to open doors from a metre away. It is ideal for pedestrian doors, automatic doors or office entrances.

Outdoor antenna designed for installations with reception problems due to obstacles such as metal surfaces, radio shadow zones or long distances.

The external antenna RET 400 needs to be connected a decoder card or Access Control, replacing these to the affected receivers if necessary. This connection is carried out using only two wires, so the installation is simple by taking advantage of cables from old installations of other equipment

Biometric sensor Motorline Independent MLB2 with built-in RFID system for access control. What. Ideal for use in companies, offices, condominiums and any other place where there is a need to manage and control the entry and exit of people.

Control of access Motorline MCA02 TCP/IP or WEB with software

For the purposes of this Regulation, the following definitions shall apply: Motorline MB1 coded approach.

For the purposes of this Regulation, the following definitions shall apply: Motorline MB2 coded approach.

Requirements for the identification of the device Motorline For use with ML4S access control.

RFID proximity reader with independent access control, capable of adding up to 10000 users.

Ideal for outdoor use, with anti-passback and anti-vandalism function.

Readers FAAC Proximity XKPR with integrated keyboard for wall or column installation. Available in 125 KHz and 13,56 MHz versions.

Interface FAAC "BUS-RELAY' with two channels for RFID proximity reader 'XTR B' and 'XTR B INOX'.

Electronic proximity key FAAC The metal keytag.

Proximity reader FAAC XTR B for access by RFID proximity key.

Intratone Mifare keys are of excellent quality, ergonomic and robust, electronic badges Intratone allow access protected by a proximity reader. What. Exclusively, Intratone allows you to ensure the safety of your building. What. From now on, for intercoms Intratone, each badge is unique. Thus, to avoid the proliferation of unknown badges: 1 declared badge = 1 badge.

Casing or adapter Clemsa AD2000 for RFID readers of models CK40, CK42.

Proximity card V2 125 kHz VCR for the PROKSIMA players.

Action 85 x 54 mm .

Programmer of keys and proximity cards V2 for the PROKSIMA reader and the DEC4-PLUS decoder.

Proximity key V2 VTR of 125 kHz for readers PROKSIMA.

Action 22 x 30 x 5 mm .

Decoder V2 DEC4-PLUS for the Proxima readers.

Proximity reader V2 CLOSE for Read & Write keys.

Advanced MUTANcode programmer which allows RIFD management. Facility management by PC for access control.

MUTANcode and MUTANcode remote controls via PC and SW 3 software (Included).

" THE CLEMSA PT4 PROGRAMMER HAS BEEN DELISTED FOR THE HIGHER PERFORMANCE PT8 MODEL "

Card with transponder reprogrammable by O-Box.

The box contains 10 units.

Badge with O-Box reprogrammable transponder, with sequence coding for multiple input.

The box contains 10 units.

Proximity reader Nice IT WAS A TRANSPONDER READER for cards and badges with a transponder.

The key and proximity card reader Erreka TAGREAD has been designed to allow access, through keys and proximity cards, in automatic door installations. The reader reads the code from the keys and proximity cards, and sends it to the TAGBASE decoder (not included).

The TAG system of Erreka allows activation of 1 relay by RFID technology (Radio Frequency Identification) by bringing a key or card closer to the reader.

The TAG system of Erreka allows activation of 1 relay by RFID technology (Radio Frequency Identification) by bringing a key or card closer to the reader.

Programming console Erreka IRTAGPROG for TAG and RollerCode management.

PC terminal with management software in the case of installations with TAG and ROLLERCODE systems.

Receiver base + decoder Erreka TAGBASE-250 for proximity keys RFID.

Interface relay for plug-in receiver power supply 230Vac or 12-24Vac/dc

Box INOX + front for surface mount for proximity reader for INTRATONE readers.

Designed for installation on products: MANUFACTURE FROM MATERIALS OF ANY HEADING, THIS REGULATION SHALL BE BINDING IN ITS ENTIRETY AND DIRECTLY APPLICABLE IN ALL MEMBER STATES, MANUFACTURE FROM MATERIALS OF ANY HEADING

RFID proximity card from Clemsa for the readers CK40 and CK42.

RFID proximity key from Clemsa for the readers CK40 and CK42.

The INTRABOX ECO DATA LECTURE module is a GSM receiver and decoder, with a wireless (wireless) installation for RFID key opening. This GSM receiver includes a SIM card with 3G connection that allows remote management from anywhere in the world.

125 Khz read/write RFID proximity key for TP-RFID key duplicator.

125 kHz RFID proximity card credit card format for duplicating keys, cards or bracelets with the TP-RFID machine.

Control of self-contained RF/RFID access Clemsa MC1500/1800 (issuers and keys). It incorporates a TD420 decoder card.

RFID proximity key reader and decoder Intratone (read-write) for use with a portable programmer (NOT INCLUDED), to manage ups and downs through an administration panel by connecting the programmer to the USB port of your Internet-connected computer.

To make recordings of user keys, high or low, the programmer would need to be connected (12-0115-SP) to a USB port on our computer and through the manufacturer's web portal.

Blue RFID proximity key for INTRATONE equipment

Software engineer Intratone for proximity keys, remote controls and read/write memory cards. What. USB connection in Windows and configuration through web admin panel.

Contactless proximity key reader Clemsa CK40 1 channel and CK42 2 channels for use with TD420/U decoders.

Decoder card CLEMSA TD420/U RFID MUTANcode 400 users for connecting readers CK40/42and external RET antennas in transmitters and receivers.