List of products by brand Erreka

The security photocell Erreka Ft06 It is an essential device to guarantee security in door automation systems and access. Designed to Detect obstacles in the passage area, prevent accidents by stopping the closing of doors automatically if it detects the presence of People, Vehicles or Objects.

Security transmitter by radio 868MHz Erreka RADSECTX that next to the receiver Erreka RADSECRX will get two-way radio communication for the security bands.

Security receiver by radio 868MHz Erreka RADSECRX that next to the issuer Erreka RADSECRX will get a two-way radio communication.

Manufacture from materials of any heading Erreka Controlled industrial LFTIND with anti-vandal obstacle detection. What. Detection distance up to 60m indoors and up to 40m outdoors.

The FP200 finger guard of a thickness not exceeding 6 mm prevents pedestrians from catching their fingers on the hinge edge.

Elegant design that doesn't interfere with the aesthetics of the door.

Versions complying with EN16005 are available.

Industrial steerable photocell Erreka KLFRX traceable transmitter-receiver with obstacle detection and wide range.

Metallic protector Erreka LPRER4 for safety mirrors of photocells.

Mechanical safety belts against crushing for automatic doors or electromechanical barriers.

The LB mechanical belt is a mandatory safety system to comply with the regulations in force which protects us from being crushed by an automatic door or barrier, can be used in tilting, sectional doors, blinds and electromechanical barriers.

Passive band Erreka rubber bumper profile designed for automatic tilting, sliding or swinging doors.

Professional outdoor antenna Erreka KRAET, metal support and powerful with 4m rG-58 cable backed with connector.

Engine Erreka SKY chain drive for industrial sectional doors up to 50m2. What. Available in single phase 230Vac and three phase 400Vac.

KIT engine Erreka SKY chain drive for industrial sectional doors up to 50m2. What. Available in single phase 230Vac and three phase 400Vac.

KIT Electromechanical engine 230Vac Erreka RINO for sliding doors, with built-in panel, ideal for installation in residential, community or industrial doors.

Electromechanical motor 230 V ERREKA DELFOS for residential and industrial revolving doors with a lifting capacity of 170 to 360 kg, for tubes with shafts of 48 mm, 60 mm and 76 mm.

KIT Electromechanical engine 230Vac Erreka RINO for sliding doors, with built-in panel, ideal for installation in residential, community or industrial doors.

Motor with articulated arm Erreka 230Vac cyclone for swing doors up to 3.5 meters and 250 kg per sheet, ideal for powering residential doors where we have small spaces or wide pillars.

Electromechanical engine Erreka HIPPO three-phase 230Vac and 400Vac for community and industrial sliding doors up to 4000 kg.

KIT's articulated arm motors Erreka 230Vac cyclone for swing doors up to 3.5 meters and 250 kg per sheet, ideal for powering residential doors where we have small spaces or wide pillars.

Motor kit Erreka Electromechanical ZEUS with saxophone hardware for tilting doors up to 9m2 residential use with 230-Vac lock and electromechanical end run.

Intensive use motors for heavy doors, as well as for light, for accesses of great influx of vehicles where temperatures are extremely low.Stop very cold environments.Up to 700 kg and 6 m long.

Aluminium surface key selector Erreka "SESU' with 2 contacts N.O. and a cylinder of europerphyl.

Box for unlocking the mark Erreka, with two-position selector, surface designed for rolling motors.

Key selector embedded in aluminium Erreka "SEEM' with 2 contacts N.O. and a cylinder of europerphyl.

Keyboard Erreka with a thickness of not more than 10 mm for access to housing or commercial premises. With output of 2 NA/NC relays and up to 250 codes.

ABS plastic keypad with integrated electronicswith a capacity to store up to 60 codes.

Aluminium keyboard Erreka with integrated electronics with a storage capacity of up to 60 codes.

The unlock safe LCBLIND09 it is designed to perform the functions of manual key and lever selector, in installations for motorised revolving doors.

Receiver base + decoder Erreka TAGBASE-250 for proximity keys RFID.

Interface relay for plug-in receiver power supply 230Vac or 12-24Vac/dc

Programming console Erreka IRTAGPROG for TAG and RollerCode management.

PC terminal with management software in the case of installations with TAG and ROLLERCODE systems.

The TAG system of Erreka allows activation of 1 relay by RFID technology (Radio Frequency Identification) by bringing a key or card closer to the reader.

The TAG system of Erreka allows activation of 1 relay by RFID technology (Radio Frequency Identification) by bringing a key or card closer to the reader.

The key and proximity card reader Erreka TAGREAD has been designed to allow access, through keys and proximity cards, in automatic door installations. The reader reads the code from the keys and proximity cards, and sends it to the TAGBASE decoder (not included).

Self-contained keyboard Erreka for use in the manufacture of motor vehicles via battery-powered radio.

Receiver 12/24v fixed (trinary) code and rolling code at 433,92 MHz or 868 MHz.

Operating with Trinitary Fixed Code or RollingCode Variable Issuers. Receiver with RSD radio module with connector allowing modification of working frequency. With 2 programmable channels with logic of operation mono-stable, bi-stable or timed.

Receiver 12/24v fixed (trinary) code and rolling code at 433,92 MHz or 868 MHz.

Operating with Trinitary Fixed Code or RollingCode Variable Issuers. Receiver with RSD radio module with connector allowing modification of working frequency. With 2 programmable channels with logic of operation mono-stable, bi-stable or timed.

Receiver Erreka IRIN4B 4 relays for fixed code or rolling code (variable) at 433,92 or 868 MHz. Compatible with controls Erreka Moon, Kuma and Iris.

Plug-in receiver card Erreka for use in the manufacture of motor vehicles standard code. The model IRRE2 does not incorporate memory and is only compatible with the KUMA fixed-code trinary emitter. The version IRRE2-250 incorporates memory for up to 250 users and is compatible with the KUMA and IRIS emitter.

Memory Erreka of 1000 codes compatible with the RollerCode and TAG systems.

230Vac or 12-24Vac/dc plug-in receiver relay interface, with a programmable channel allowing the use of a plug-in receiver in installations without radio connector.

Usable in all types of temperatures between -20/+60.

Valid for any ERREKA receiver.

Modular radio receiver Erreka IRRE2V2-250 for ZEUS engine compatible with the KUMA or IRIS controls.

KIT 24V battery charger Erreka CHG01.

Oil canister Erreka for hydraulic motors.

Fork and Rotula Motor Battery Erreka VULCAN.

Electrical brakes Erreka ERGOS.

Compatible with axle drives 48/60mm, 120/160/200 KG

Encoder Set Erreka CICLON/MAGIC/DRACO (porta-iman, iman, UGN)

Removable motor unlock system Erreka ORION.

Programming display Erreka RINO

Display Connection Cable Erreka RINO.