List of products by brand Erreka

Manufacture from materials of any heading Erreka IZAR for tilting engine.

Curved harness Erreka NPTOR for torsion springs and counterweights.

Unlocking with 3m knob NPE308 for sectional doors Erreka.

Integrated frame replacement Erreka for sliding door motor TORUS KM1800 and TORUS INVERTER TO 1800.

Receiver base + decoder Erreka TAGBASE-250 for proximity keys RFID.

Interface relay for plug-in receiver power supply 230Vac or 12-24Vac/dc

Programming console Erreka IRTAGPROG for TAG and RollerCode management.

PC terminal with management software in the case of installations with TAG and ROLLERCODE systems.

The TAG system of Erreka allows activation of 1 relay by RFID technology (Radio Frequency Identification) by bringing a key or card closer to the reader.

The TAG system of Erreka allows activation of 1 relay by RFID technology (Radio Frequency Identification) by bringing a key or card closer to the reader.

The key and proximity card reader Erreka TAGREAD has been designed to allow access, through keys and proximity cards, in automatic door installations. The reader reads the code from the keys and proximity cards, and sends it to the TAGBASE decoder (not included).

KIT 24Vdc electric motor Erreka String draw for use in the manufacture of motor vehicles up to 35m2, for residential, community and industrial use.

Includes maneuver chart VIVO-D103 (analogue for one 24 Vdc engine).

Receiver Erreka IRIN4B 4 relays for fixed code or rolling code (variable) at 433,92 or 868 MHz. Compatible with controls Erreka Moon, Kuma and Iris.

KIT engines Erreka SIRIUS electromechanical 230Vac and 380Vac by chain transmission for industrial sliding doors of up to not more than 50 m2, with electromechanical race finishes.

Complete manual for sectional engine Erreka THAT'S IT.

Straight telescopic harnesses for hydraulic motors Erreka the ATLAS model.

Saxo hydraulic motor Erreka ATLAS for outside opening.

Piston assembly hydraulic lock for unlocking the hydraulic motor Erreka OTHER. What. Includes a 1-meter whip.

Manoeuvre chart Erreka CLEVER03 for sliding and tilting doors analog 230Vac with soft stop option and end of run.

Selector Erreka of plastic surface with one or two contact wrenches.

Selector Erreka other articles of plastics with one or two contact wrenches.

Engine Erreka Electromechanical IZAR at 24 Vdc, of chain for industrial sectional doors of up to 25m2.

KIT engine Erreka Electromechanical IZAR at 24 Vdc, of chain for industrial sectional doors of up to 25m2.

Asemgay is a device whose function is to discriminate calls used to manage traffic lights. What. It's housed in the control panel of the automatic doors.

L JDM vehicle magnetic loop detector Erreka for 1 or 2 loops, mainly used to detect vehicles, with 2 two-way relay outputs.

Enclosure for double swinging door allowing the first sheet to be fixed to the ground once the second sheet has been closed.

Memory Erreka of 1000 codes compatible with the RollerCode and TAG systems.

230Vac or 12-24Vac/dc plug-in receiver relay interface, with a programmable channel allowing the use of a plug-in receiver in installations without radio connector.

Usable in all types of temperatures between -20/+60.

Valid for any ERREKA receiver.

Sliding motor integrated electronic plate Erreka DINGO, WHAT ARE YOU DOING.

Electronic plate Erreka LINCE ideal for use as a replacement for the slide motor Erreka The lynx.

Machinery for making pulp of fibrous cellulosic material Erreka JESUS

Front cover with OPEN-STOP buttons for steering wheels Erreka I LIVE.

Front cover with OPEN-CLOSE-STOP buttons for steering wheels Erreka I LIVE.

Self-contained keyboard Erreka for use in the manufacture of motor vehicles via battery-powered radio.

230Vac electromechanical access barrier for residential, community and industrial accessup to 6 metres, equipped with anti-crush system and external running ends.

Manufacture from materials of any heading Erreka ARC 230V for articulated arms for swing doors up to 2,5 m with wide pillars. What. The arms are available in 450mm or 650mm.

Electromechanical bollard Erreka For the purposes of this Regulation, the following definitions apply: for vehicle access control.

KIT Electromechanical engine 230Vac Erreka RINO for sliding doors, with built-in panel, ideal for installation in residential, community or industrial doors.

Electromechanical motor 230 V ERREKA DELFOS for residential and industrial revolving doors with a lifting capacity of 170 to 360 kg, for tubes with shafts of 48 mm, 60 mm and 76 mm.

Motor with articulated arm Erreka 230Vac cyclone for swing doors up to 3.5 meters and 250 kg per sheet, ideal for powering residential doors where we have small spaces or wide pillars.

Machinery for making pulp of fibrous cellulosic material Erreka CYCLONE.

KIT's articulated arm motors Erreka 230Vac cyclone for swing doors up to 3.5 meters and 250 kg per sheet, ideal for powering residential doors where we have small spaces or wide pillars.

Hose cable 8 threads + screen (Erreka).

Electromechanical engine Erreka HIPPO three-phase 230Vac and 400Vac for community and industrial sliding doors up to 4000 kg.

Tube motor Erreka SINE Ø35 AND Ø45 for household blinds, curtains and awnings up to 118 kg.

This complete range is completed by up to four different references for domestic blinds, roll-over curtains and awnings. For octagonal tubes from 40 mm to 60 mm, end-of-course system with variable path adjustment and low noise level, with accessories for installation.

Transmitter 1 channel Erreka 433.92 MHz for the SENA tubular engine.

Transmitter 4 and 8 channels Erreka 433,92 MHz for SENA tubular motor with LED display.

Control panel with built-in 433.92MHz receiver for SENA-C and SENA-CM models.

Electronic plate Erreka NAOS 70/100, ideal as a replacement to replace the built-in panel.

KIT of 2 24Vac auxiliary batteries with exclusive charger (in a separate box) for direct current slide motors the DINGO range, the NAOS and ZETA tilting/sectional doors, and the NET and OMNI automatic barriers.