Receiver Forsa ST500 wiring with 2 independent channels frequency 868.35 MHz for TP2/TP4 commands.

12/24v MICRO Receiver with capacity for 400 codes or 1,000 codes.

The configuration and management of this receiver is done with the PC-Copy Duplicator.

TRTA channel expansion card compatible with receivers Forsa.

External receiver FORSA RT-500 at 230 Vwith a capacity of 500 users for NEO RT transmitters.

PUJOL 'ACTIVE' wired external receiving antenna compatible with RollingCode 433 MHz transmitters.

The two-channel SOMMER receiver S10696-00001.

The SOMMER bi-directional receiver is compatible with SOMLoq2 remote controls: Pearl 4018, Pearl 4019, Pearl status S10448, Slider S10305.

Outer receiver KINGGATES FREDDY2 at 433.92 MHz to cable it to 12/24V.

Compatible with remote controls KINGGATES STYLO4K.

Receiver 12/24V 433 MHz 1 channel.

MCONNECT LINK is a tool for installers that allows us to configure all the parameters of your power plant Motorline through Wi-Fi either in person or remotely.

The MT-23 is a receiver that automatically tunes to the frequency of the remote control without the need to select the frequency by dip-switch.

It works with fixed and evolving code controls at the same time.

The receiver is tuned to a single frequency.

The module Nice BiDi-WiFi is a pocket programming interface which ensures a simple and complete configuration of the automatic systems Nice Gate and Door through the MyNice Pro app, making installation setup procedures simple and efficient.

Pocket tools, which must be carried at all times to facilitate configuration of the automatic systems Nice: all phases of programming the automatic systems can also be done comfortably from your vehicle.

DEA "NET-NODE 2.0" is a device that connects to DE@NET hubs and external receivers.

Thanks to NET-NODE, for programming with a smartphone you can use the DEAinstaller and DEAuser applications on your smartphone. It is only compatible with DE@NET power plants equipped with serial port and NETLINK technology.

Removable memory card GO FORSA with capacity for 500 users.

Outdoor antenna designed for installations with reception problems due to obstacles such as metal surfaces, radio shadow zones or long distances.

The external antenna RET 400 needs to be connected a decoder card or Access Control, replacing these to the affected receivers if necessary. This connection is carried out using only two wires, so the installation is simple by taking advantage of cables from old installations of other equipment

Wired receiver Clemsa Mastercode "RMV 2U" 12/24V 433 MHz with two channels.

The universal receiver 'RMV 2U' is fed to 12/24V ac/dc to be able to be connected in any manoeuvring frame which has an alternate button output.

Outer receiver KINGGATES FRED 2 channels RollingCode is 433 MHz.

" THE FRED MODEL 2 WE'VE GOT HIM OUT. _ FREDDY2 WITH THE CHARACTERISTICS"

Professional outdoor antenna Erreka KRAET, metal support and powerful with 4m rG-58 cable backed with connector.

Receiver BFT "CLONIX 4 RTE' 230V RollingCode of four channels at 433 MHz.

External receiver BFT "CLONIX 2E AC U-LINK 230' with built-in receiver 433 MHz, compatible with the U-LINK protocol (equipped with 3 connecting slots). The Receiver is powered at 230Vac and has a memory capacity of 2048 users.

Universal PUJOL micro receiver wired for 31 users RollingCode 433.92 MHz.

The power supply of this receiver is at 12/24 Va/Dc, 1-channel mono-stable.

Universal RX2DUAL universal receiver capable of automatically storing different emitters regardless of code type or frequency being compatible with fixed and evolutionary code commands at 433 or 868 MHz.

The RX2DUAL receiver allows us to memorize different marks simultaneously provided it has the frequency 433 MHz or 868 MHz.

External receiver Came RE432M 2 channels and multi-user, working frequency 433.93 MHz and 12-24V AC/DC power supply.

Modular receiver Aprimatic RX4MF 433 MHz 4-channel, fed at 24V with 70 code capacity.

It allows use of 4-channel remote controls and selection of mono-stable or bi-stable operating mode for each channel separately.

Bichannel receiver at 433.92 MHz in container, allows a very high degree of security for remote access control. What. The RX2C receiver is capable of operating with Apricode controls.

RX2C have 2 channels with relay output normally open.

Universal two-channel receiver of frequency AM 433.92 MHz, mounted in a case with protection grade IP54. Works with all Came transmitters of the TOP/TAM series of 433.92 MHz. What. Both channels normally operate in ”mono-stable” mode, but on channel 28 you can choose, as an alternative, the bi-stable” (switch) mode.

Receiver Nice OX4T which belongs to the ONE series and has a built-in transmitter where it can act as a repeater.

4 channel receiver Beninca ONE.4WB with power supply with extended switching range (90÷255 Vac) with triple coding, Advanced Rolling Code, Rolling Code and Fixed Code. What. ARC encryption ensures maximum security thanks to the length of the transmitted code (128 bits) and the high number of possible combinations

External 230 V MICRO receiver2 channel, with a capacity of 400 codes or 1,000 codes, to be configured with the PC-Copy duplicator.

Central FORSA CCA-868 500 U., is an access control for 500 users with integrated receiver. What. It allows recording 868 MHz transmitters as well as bi-technology transmitters. Includes connection of proximity readers for card and key management.

Thanks to the display, the devices recorded in the memory can be up and down, it also includes input for event cards, for greater management capacity in access control.

Receiver kit Nice long range OXILR with two-way emitters and a universal adapter for frames from other manufacturers.

Radio and central receiver NICE TT2N in miniature for the for use in the manufacture of motor vehicles.

Grade of protection IP20.

Simple and fast programming: using the dedicated key.

The presence of a signalling LED helps to follow the correct programming procedure by indicating, for example, exceeding the thresholds programmed in the climate sensor.

Receiver DEA external bi-channel with capacity to store 1000 emitters.

Interface for connecting the O-View programming unit.

The universal receiver BFT Clonix 2E, you can connect any manoeuvring box on the market that has a voltage output of 12/24VAC/DC.

This receiver card has two channels for pulsing two actuators or electronic devices.

It has capacity for 128 additional transmitters in auto coding the working frequency is 433.92MHz

Memory Clemsa TM400 MUTANCODE of 400 users.

Compatible with frames and receivers Clemsa from the MUTANCODE series.

Small module for opening garage door by a short burst of light, compatible with both cars and motorcycles.

The module has a jumper to select the voltage input as either positive or negative. Normally when it comes to halogen light it sends the voltage as positive, and for LED light it sends the voltage as negative.

Receiver V2 RXP4 modular 12/24V with display, frequency 433,92 or 868,30 MHz. Function personal pass – royal.

Receiver V2 WALLY2 bi-channel 230V with capacity for 240 users and with load control capability up to 1500W. Version at 433 MHz and 868 MHz.

This is a 12/24v micro-mini receiver of 1 channel, with capacity for 400 codes or 1,000 codes.

The configuration and management of this receiver is done with the PC-Copy Duplicator.

Receiver FAAC RP 868 SLF plugged in, fast-coupling (compatible with all electronic devices FAAC of a kind used in motor vehicles 5 pin rapid coupling, or external utility by connecting to the interface of the accessory RP relay).

Frequency module FAAC XF 868 MHz, compatible with all devices FAAC they are equipped with OMNIDEC universal coding systems, recognisable by the logo applied.

Outer receiver Forsa of 230Vac for TP2 emitters at 868 MHz, with capacity for 500 users and 2 relays.

Receiver Erreka IRIN4B 4 relays for fixed code or rolling code (variable) at 433,92 or 868 MHz. Compatible with controls Erreka Moon, Kuma and Iris.

Repeat radio frequency signal at 433.92 MHz and 868 MHz quickly and easily to improve the emission range, only by connecting the repeater to 230 V. The repeater itself will be responsible for receiving the transmission of a control and sending it to the receiver improving emission power to achieve greater range.

Outer receiver Clemsa MasterCode RV44, frequency 433.92 MHz 4 channel 230Vac or 12/24V ac/dc power supply.

This is a universal receptor, wired and powered at 12/24V up to 400 users with 2 channels a frequency 433,92 MHz or 868 MHz.

Receiver Beninca ONE.2WB of 433,92 MHz with a power supply of 12÷28 Vdc / 21÷28 Vac, 2 channels with triple coding: Advanced rolling code, rolling code and fixed code.

Pre-wired aerial receiver Nice 2 channel transmitter compatible Nice it shall be capable of operating at a frequency of 433,92 MHz (FLO, SMILO and ERA INTI).