Safety Accessories

Fuelle type anti-pinch rubber in coils of 10 or 20 meters to protect the fingers on the hinges edges.

Pair of safety photocells Beninca "FTC.S" for external assembly in column, 24 Vac/dc feeding.

Possibility of synchronizing up to 4 pairs.

Security radar Aprimatic DT90C for automatic glass doors with infrared detection and bidirectional microwave.

Pair of photocells BFT AKTA A30 orientables 180o horizontal and 20o vertical. 24V powered with a maximum range of 30 meters.

AKTA A30 security photocells are ideal for automatic shutdowns and safety devices.

Photocell of safety ROGER M90/F2ES, radio-receptor of 24Vac.

Radar FAAC XM 200 with microwave technology and radar matrix detection, which is very easy to configure with two buttons. Thanks to the accessories included, it is possible to install the radar on the wall or on the ceiling and provides an aesthetic result.

Security photocells Prastel FOTO30-B formed by a 12/24V-powered transmitter and receiver are designed for the use of access systems in automatic garage doors with a maximum range of 30m2.

Safety photocell Motorline MF40 with orientation sensor up to 180°.

✓ Integrated Amber or RGB flashlight lamp

✓ Exceptional detection range up to 40m

✓ Flexibility of installation without cables

✓ Autonomy and efficiency with solar panel and rechargeable battery

Microwave radar ideal for doors large and high ceiling locations, which can be installed up to 7 m high. Account with technology detection able to differentiate people and vehicles, reducing unwanted openings, thus saving energy loss.

RadioBand Prastel TCO7SG-KIT for safety bands resistive 8.2 KΩ where its radiofrequency link to 868 MHz between Emisor and Receptor makes it an excellent choice for the use in residential or community doors of the type sliding doors, tilting or canceling battens.

Security Radar Aprimatic DM44 for detect the presence opening on automatic glass doors with microwave detection with a maximum height of 3 meters.

Security photocells Beninca PUPILLA.B for external mounting 220°, transmitter powered with battery through photovoltaic panel.

Installed luminous indicators with diagnostic function.

Radioband Transmitter Prastel TCO7SG-TX to use as a second channel in safety bands Resistive 8.2 kΩ. Linking is by radiofrequency at 868 MHz between emitter and receiver.

This transmitter is designed to use as a second channel next to the Transmitter and Receiver Kit Tco7sg-kit.

Curtain photocells Sommer/ Wiit For industrial doors up to 10m and 2.5m high.

This game of photoelectric barriers are a security device for automatic door closures Applied on industrial doors or buildings.

The issuer and the receiver create a Infrared rays It offers protection up to 2.5 meters high.

When infrared rays are interrupted, a signal is sent to the plant. After the detention area is free, a new signal is sent to the plant to indicate that the area is clear.

The photocell Nice F210B with bluebus technology offers maximum safety and reliability in automatic doors Nice Slides and swingers that have BlueBus technology.

The installation is simple, with only two threads, Alcace stable and automatic synchronization.

Synchronized photocells adjustable to 210 ° on the horizontal axis and 30 ° on the vertical axis.

The MPC14 is a controller for safety bands Resistive of 8K2 and optical safety bands.

With its 2 channels, it ensures the Continuous supervision of the security system and blocks it if necessary.

Security photocell with mirror model Era Photocell M 12/24v for distances up to 15 metres.

Emitter with mirror. Orientation and sensitivity regulator. The output of the relay shall be 500 mA / 48 V

The safety belts reverse the engine maneuver in case of contact with the part of the rubber profile avoiding the impact between the door and an obstacle (car or person).

Resistive safety band 8K2 (per contact) for tilting or swinging doors.The connection can be made wired to the painting or the most recommended option is wireless installation by means of transmitter-receiver panels which you can find at the bottom of the page.

Column support for photocells and complementary accessories Motorline.

Photocell kit Motorline MFE model, external modulated reflector with mirror, with Nominal scope of 12m.

Because it is a mirror photocell, it does not need a cable passage for the other side as it emits an infrared signal that reflects in the mirror on the opposite side and receives it again.

The MX14 and MR14 devices are a solution developed for the prevention of automated vehicle accidents, as required by EN 12978.

The MF2020 is a column photocell developed to safeguard all types of industrial doors (sectional and fast doors) up to a maximum width of 10 metres.

The sender and receiver create a infrared grating it offers protection up to eight feet high.

When the infrared beams are interrupted, a signal is sent to the control room. After the holding area is clear, a new signal is sent to the control to indicate that the area is clear.

LED flashing light in version 90-240 Vac and 12-36 Vdc with an integrated 433,92 MHz antenna.

12mm resistant safety band kit.

The band is prepared to be mounted directly into the installation wirelessly through a RadioBand.

Carlo Gavazzi security camera with cathode ray mirror, multi voltage (12/24V or 220V) with a maximum range of 12m.

This photocell is designed to withstand adverse industrial environments. What. The distance of detection of 12 m this makes it very useful in applications where dust and weather conditions affect the detection capacity. Housed in a other, not further worked than hot-rolled with two stop presses for easy connection.

Aluminium column pair BFT for photocells of the THEA, DESME and COMPACTA series. Height 522 mm

Lamps and lighting fittings Beninca "LAMPY" 230V with integrated antenna.

KIT Closing caps + cable insertion and rubber resistance V2.

Parts and accessories BFT AKTA to use the aluminum columns.

Infrared sensor FAAC XPB-ON presence and movement, with active infrared technology with background suppression.

Industrial radars Clemsa with opening and opening sensors with presence detection.

Laser sensor or Barrier scanner Clemsa XGUARD for motion and presence detection.

Industrial steerable photocell Erreka KLFRX traceable transmitter-receiver with obstacle detection and wide range.

Metallic protector Erreka LPRER4 for safety mirrors of photocells.

Mechanical safety belts against crushing for automatic doors or electromechanical barriers.

The LB mechanical belt is a mandatory safety system to comply with the regulations in force which protects us from being crushed by an automatic door or barrier, can be used in tilting, sectional doors, blinds and electromechanical barriers.

Passive band Erreka rubber bumper profile designed for automatic tilting, sliding or swinging doors.

LED signalling lamp V2 BLINKO multi voltage from 24 to 230 V.

Manufacture from materials of any heading CAME DLX synchronized infrared beams up to 30m.

Pair of optical equipment Nice FT210 adjustable at 210o for sensitive edges with wireless transmitter and mobile mounting.

Waterproof box button with OPEN, SHUT, and emergency STOP buttons.

Mechanical safety belt EMFA 70 mm by micro-switches, with cable voltage monitoring and sensitivity regulation.

It can be used for swinging or tilting doors, sensitive over the entire path of the band (including ends).

Security card EMFA "BSC-SC' to incorporate 8,2 KΩ safety-belt boundary for dead-end manoeuvring frames.

KIT Conductive safety-belt with unassembled aluminium and rubber 40 mm profile.

All kits come with 2-meter aluminium profiles, and the 40mm rubber comes to be easily assembled by gluing it on the front. On the other hand, each unit comes with its corresponding caps and resistance.

Infrared radar Forsa New EVOLUS/NEPTIS Dual technology with sensitivity adjustment.

Infrared radar 3H-IR14C Double technology with safety 3m maximum height, 4 dual relay outputs certified according to EN 16005.

Automatic activation of sliding doors and pedestrian safety sensor. Small in size, with a precisely adjustable detection area.

KIT Pair of aluminium posts with photocells COMPACTA A20-180 adjustable 180o horizontally. What. The maximum range is 20 metres and they can be fed from 12 to 33 Vac or 15 to 35 Vcc.