Safety Accessories

Parts and accessories DEA 105/N with a maximum range of 20 m measuring 70xh70x88 mm .

AURA is an LED flashlight available with power supply: 230V and 24V. In both versions the visual signaller integrates into the circuit an antenna and a 433MHz receiver. The length of the cable is 5m.

Manufacture from materials of any heading Erreka Controlled industrial LFTIND with anti-vandal obstacle detection. What. Detection distance up to 60m indoors and up to 40m outdoors.

The FP200 finger guard of a thickness not exceeding 6 mm prevents pedestrians from catching their fingers on the hinge edge.

Elegant design that doesn't interfere with the aesthetics of the door.

Versions complying with EN16005 are available.

Sensor FAAC XDT3 with dual technology for movement and presence for evacuation routes.

Aperture and security in one sensor. Safety control according to EN 16005.

Sensor FAAC XV1 with dual technology for movement and presence.

Aperture and security in one sensor. Safety control according to EN 16005

Sensor FAAC XDT1 with dual technology for movement and presence.

Aperture and security in one sensor. Safety control according to EN 16005.

Sensor FAAC XBFA of movement and presence over infrared radiation.

The ideal security for automatic curtain doors. Aperture and security in one sensor.

Compact radar FAAC XM100 ONE one-way microwave.

The smallest opening radar for doors.

Of a thickness of Clemsa model BAPZ, which prevents pedestrians from catching their fingers on the hinge edge.

Pair of safety photocells Beninca Pupil oriented 180o. Ability to synchronize up to 4 pairs. Power supply 24 Vdc.

Easy adjustment by LED indicating correct alignment.

Of a thickness of V2 which prevents pedestrians from catching their fingers on the hinge edge.

Lamps and lighting fittings CAME KLED for automatic door signalling, fed at 120/230 Vac.

Suitable for outdoor use (outdoor and waterproof).

Flashing light without built-in antenna for motors with 24 V power supply.

The flashing signal light for automatic cancellation, RADIUS LED of BFT, 24 V without built-in receiving antenna. Thanks to LED technology, energy consumption is reduced by approximately 80% compared to models with traditional incandescent bulbs, while the product life is extended. Possibility to install on a surface (such as a pillar or column) or on the wall using the special accessory. Grade of protection IP44.

Safety photocell MEDVA PH6, transmitter-receiver at 12/24V AC/DC with a maximum range of 25 metres.

Intermittent light and acoustic pilot, powered at 230V, ideal for sound signalling and warning of the presence of a vehicle when entering or leaving the garage.

LED signalling lamp with fixed or flashing light. What. In the case of vehicles with a maximum mass not exceeding 2000 kg:. THIS IS IP 54. 90 x 190 x 75 mm

Universal LED flashing lamp, compatible with all types of power plants. Power supply at 230Vac / 24Vac/dc / 12Vac/dc

Traffic light receiver card for garage manoeuvres Erreka.

Lamps and lighting fittings Erreka LUMI multi voltage with antenna 433 MHz, used to warn of movement of motorised automatic doors.

Adjustable photocell with battery (from 0 to 210o) 12-24V The FT04 photocell (TX + RX) is specially designed for the industrial and private door market. The sensor complies with the regulations for motor doors in Europe. Its shape makes it easy to mount on the wall.

Safety photocell Erreka FT08 with mirror.

FT08 photocells are designed to detect obstacles in automatic door and gate installations, preventing the door from colliding with them.

They consist of a transmitter-receiver module and a mirror. The module emits an infrared beam which is reflected in the mirror and returned to the module.

If the beam does not return to the module, the contacts of terminals 1 and 2 change state.

Mechanical safety belt Erreka for tilting or swinging doors. The connection is made by wiring from the band to the maneuver board.

The safety belts reverses engine manoeuvre in case of contact with the part of the rubber profile preventing the impact between the door and an obstacle (car or person).

The radio system simplifies even complex installations, eliminating the need for wiring between the safety band and the automatic control panel.

ANDthe radio system consists of a receiver XR S 868, communicating with an emitter XT S 868, to which one or two 8,2 Kohm resistive safety bands or auxiliary devices may be connected.

" The safety belts on the product accessories are fully compatible "

Wall security photocell FAAC XP20 steerable transceiver system with a maximum range of 20 metres and IP protection.

This auxiliary safety device is used for all types of garage doors and locks, reversing the maneuver in case of infrared beam cut.

Circular reflective cathode-ray mirror for safety photocells, standard for any type of brand. The diameter is 85mm.

Pair of photocells Nice It was PHOTOCELL S with transmitter-receiver operation.

The models EPSB and EPSAB have the BlueBus technology compatible with some Nice which allow the photocell to be connected with only two wires where they will receive power and the safety contact.

Resistive safety band 8K2 Clemsa with a length of not more than 20 mm.

The safety belt is an anti-crushing system, which reverses the engine manoeuvre in case of contact with the soft rubber. It is installed on edges that can trap people or objects that may be accidentally encountered in the path of automation.

Electromechanical safety belt Clemsa, under the supervision of the cable tension and with sensitivity regulation. What. Recommended use for folding doors. Sensitive throughout the course of the band (even extremes).

For the purposes of this Regulation, the following definitions shall apply: Motorline model MF30 with a maximum range of up to 25 metres.

For the purposes of headings 8521 to 8528.

The holder is for a standard circular reflective retro-reflective mirror for any type of mark. The diameter is 85mm.