DMIL TIFON 20 II EVO sliding door motor a 230Vac with encoder and end of mechanical race for industrial doors up to 2000KG. It is equipped with built-in 868 MHz radio and maneuver frame.

Sliding engine Beninca BULL HERE Reverse for community or industrial use up to 1400 KG.

The operator includes command center with receiver and encoder. Autoventilated, reversible, with electrophrase and custom unlock key.

KIT engine CAME BXL04AGS at 24V for sliding doors up to 400KG and length of 10m thought for cancellations for residential use.

Sliding engine BFT SP3500 with 400V three-phase power supply for industrial doors up to 3500 kg of large size that require power and endurance.

Ditec ION electromechanical motor with 24 V virtual encoder for residential sliding doors up to 400 kg (ION4) or 600 kg (ION6), with obstacle detection and force regulation.

Sliding engine Beninca "BULL5M' 230V for residential use up to 500 KG with built-in receiver. What. Possibility to optionally add Encoder and Magnetic Race Ends.

DMIL "TIFON 8 EVO" 230Vac sliding motor for residential canals up to 800 KG.

The operator has mechanical race terminals, optical encoder and obstacle detection.

Engine Nice ROX600 is a 230 V electromechanical gearbox motor designed to automate sliding doors up to 600 kg for residential use: has an electronic control unit incorporating a 433,92 MHz radio receiver with coding FLO, FLOR, OPERA, HCS SMILO.

ATTENTION: THE NICE ROX600 ENGINE HAS BEEN DISCONTINUED BY MODEL THEFT600 OF BETTER BENEFITS.

KIT Sliding engine Nice It shall be capable of operating at a voltage not exceeding 300 V for residential cancellations up to 600 kg. It incorporates a control panel with self-programming route and receiver 433 MHz compatible with transmitters Nice ONE.

The gearbox Nice ROBO600 incorporates mechanical race finishes in opening and closing.

Sliding engine Nice It shall be capable of operating at a voltage not exceeding 300 V for residential cancellations up to 600 kg. It incorporates a control panel with self-programming route and receiver 433 MHz compatible with transmitters Nice ONE.

The gearbox Nice ROBO600 incorporates mechanical race finishes in opening and closing.

Engine CAME BKV 36Vdc for heavy sliding doors of 1,500/2,000/2,500 KG with heavy use.

High speed motor BFT "ICARO VELOCE SMART AC A' 230V for sliding doors of very heavy use up to 1000 and 2000 kg.

KIT Sliding engine BFT "DEIMOS ULTRA BT A" 24V electromechanical for charges of up to 400/600 KG with intensive use and magnetic run ends.

Sliding engine BFT "DEIMOS ULTRA BT A" 24V electromechanical for charges of up to 400/600 KG with intensive use and magnetic run ends.

KIT Sliding engine BFT "DEIMOS AC' electro-mechanical 230Vac for residential households up to 600/800 KG with electro-mechanical end of run.

The "DEIMOS AC" operators are ideal for motorizing residential doors with a speed of 9 m/min, they are easy to install thanks to their programming by trimmer and DIP switch. The end of the race is electromechanical.

Sliding engine BFT "DEIMOS AC' electro-mechanical 230Vac for residential households up to 600/800 KG with electro-mechanical end of run.

The "DEIMOS AC" operators are ideal for motorizing residential doors with a speed of 9 m/min, they are easy to install thanks to their programming by trimmer and DIP switch. The end of the race is electromechanical.

Sliding engine Beninca "BULL10M' 230V for lamps for Community use up to 1000 KG. What. It incorporates central with receiver, encoder and custom unlock key. Available model "BULL10M.S" with magnetic running ends.

KIT engine Beninca "BULL624ESA' 24V for Community heavy duty sliding doors up to 600 kg. What. It incorporates central with receiver, encoder and custom unlock key.

Engine Beninca "YAK25 OTI' 230V for heavy industrial doors up to 2500 kg, with oil bath gearbox. What. Central with virtual encoder and inverter technology.

KIT Sliding engine Beninca "BULL5M' 230V for residential use up to 500 KG with built-in receiver. What. Possibility to optionally add Encoder and Magnetic Race Ends.

Sliding engine Clemsa "AC562N" electromechanical 230 V for residential doors up to 500 kg. It incorporates a manoeuvre chart CLAS62C. The actuator has magnetic running ends, levered unlock system, aluminum body painted with polyester powders and ABS crankcase. in addition, thanks to its anti-crush system and smooth stopping we will have an engine with reliability and maximum precision.

KIT Sliding engine Clemsa "AC862N" electromechanical 230 V for residential doors up to 800 kg. It incorporates a manoeuvre chart CLAS62C. The actuator has magnetic running ends, levered unlock system, aluminum body painted with polyester powders and ABS crankcase. in addition, thanks to its anti-crush system and smooth stopping we will have an engine with reliability and maximum precision.

KIT Sliding engine Clemsa "AC424N" electromechanical 24V heavy use for residential doors up to 400 kg. Includes Sprint M24 maneuver board. The actuator has magnetic running ends, levered unlock system, aluminum body painted with polyester powders and ABS crankcase. in addition, thanks to its anti-crush system and smooth stopping we will have an engine with reliability and maximum precision.

KIT Sliding engine Clemsa "AC862N" electromechanical 230 V for residential doors up to 800 kg. It incorporates a manoeuvre chart CLAS62C. The actuator has magnetic running ends, levered unlock system, aluminum body painted with polyester powders and ABS crankcase. in addition, thanks to its anti-crush system and smooth stopping we will have an engine with reliability and maximum precision.

Sliding engine Aprimatic "WAVE 836 BS" Brushless 36V for doors up to 800 KG with continuous use.

ONDA 836 BS is an operator for sliding canopies up to 800 kg in continuous use. It has a 36 Vcc motor and «brushless» technology which, together with an oil-washed reducer, allows continuous use of the door. It incorporates dual adjustable control over engine force by mechanical and electronic clutch. Precise movement under the supervision of a door position and speed recognition encoder.

High speed motor Aprimatic "FAST WAVE 424" 24V for sliding doors up to 400 kg and 320 mm/s for residential use.

Incorporates the manoeuvre chart, with anti-crushing system to reverse the manoeuvre in case of detection of obstacles. What. Custom key unlock in case of power failure.

Sliding engine PPA "DZ CUBE 850' electromechanical 230V for residential or communal doors up to 850 kg it's a lightweight hybrid with a Pinon M4 Z14. End of magnetic racing and encoding. .What.

The DZ CUBE actuators have the most modern technology and design on the market. It also has various features to facilitate and expedite installation. DZ CUBE is the best choice for automating residential and small condo gates.

Sliding engine PPA "DZ HUB 450' electromechanical 230V for light residential doors up to 450 kg it's equipped with an AGILITY HYBRIDE electronic board with a Pinon M4 Z14.

Super fast engine PPA "DZ CUBE 1000' JETFLEX with 230 V for residential or communal sliding doors up to 1000 kg with magnetic terminals and digital timing.

Sliding engine EMFA HULK "High Speed" and Brushless technology 48V heavy use, doors up to 1800 KG. It incorporates a manoeuvre display and a 433 MHz receiver.

The SUPER HULK version uses Brushless technology but its speed is standard, in turn allows us to power doors up to 2500 kg.

HULK is the new range of engines developed by EMFA-MAP with a high-performance 48Vdc Brushless technology, for heavy use and heavy doors. What. Under a single aesthetic, the firm has developed two different versions for sliding doors up to 1800 & 2500 kg.

The HULK industrial models have been designed to operate doors of an industrial type and for heavy use. What. They have pinon in M4 steel, although there is an option to apply a larger M6 pinion.

Sliding engine Forsa BETA 230V or 24V format for residential lamps up to 500/800 KG. What. The actuators incorporate a manoeuvring box and a built-in receiver, with magnetic end and anti-lock system.

KIT engine Pujol SYROS at 230 V for residential sliding doors up to 600 or 800 kg. It includes a 5-meter NYLON zipper pack and 2 VARIO4U RollingCode 433.92 MHz transmitters.

New series of sliding motors Pujol with fixed anchorage system and built-in receiver box, which adapts easily to cancellation with m4 zipper and allows you to easily adjust the motor force.

KIT engine Pujol Marathon DC at 24V with M4 pin for sliding doors up to 700 kg for residential, community or industrial doors.

It contains 5 meters of Nylon zipper with its screw, external receiving antenna and 2 RollingCode Emitters.

Sliding engine PPA "DZ CUBE 550 Brushless' with 24 V for residential sliding doors of up to 400 kg with magnetic end run and encoder. It allows the installation of batteries to operate without electric current.

The international brand PPA who grew up in Brazil it introduces its 24V single-phase Brushless motor with great performance at a very competitive price, its low maintenance and performance make us a perfect motor for residential doors with a maximum weight of 400 kg.

KIT engine EMFA COMEC 24V electromechanical DC with built-in receiver box 433,92 MHz for automating sliding doors for residential or industrial use with heavy use.

High speed electromechanical motor PPA "DZ RIO 800 JETFLEX WITHOUT BRUSH" to power residential or communal sliding doors up to 800 kg. It has: magnetic end run and by encoding.

Reference on the market for years in conventional models, the DZ RIO JETFLEX BRUSHLESS sliding door actuator is ideal for doors up to 800 kg. Brushless technology prevents the gearbox motor from heating up and makes the product have excellent performance and greater durability, being able to do an intense number of cycles with low energy consumption.

Super fast engine PPA "DZ CUBE 650' JETFLEX with 230 V for residential or communal sliding doors up to 650 kg with magnetic terminals and digital timing.

Engine CAME BY-3500T for industrial sliding doors up to 3500 kg and 17m in length. Power supply 230 - 400 Vac three-phase, including electronic card and mechanical end-runners

Electromechanical engine Erreka HIPPO three-phase 230Vac and 400Vac for community and industrial sliding doors up to 4000 kg.

KIT Electromechanical engine 230Vac Erreka RINO for sliding doors, with built-in panel, ideal for installation in residential, community or industrial doors.

KIT Electromechanical engine 230Vac Erreka RINO for sliding doors, with built-in panel, ideal for installation in residential, community or industrial doors.

Sliding engine EMFA "COMEC 20 HE' for industrial doors up to 2000 kg. Version electromechanical 230Vac with built-in display. The COMEC 20 HE engine has the oil bath gearbox, prepared for intensive use and self-ventilated.

Engine EMFA EXPY electromechanical 230V for residential sliding doors up to 600/800 kg. It 's incorporated receiver maneuver box 433 MHz, encoder and anti-crush system.

Engine FAAC 844 E R for industrial sliding doors up to 1 800 kg with magnetic running ends and anti-crush system.

Engine FAAC 746 E R for residential sliding doors up to 400/600 kg with magnetic running ends and anti-crush system.

Engine DEA LIVI in 24V version for residential sliding doors of 600 kg or 900 kg.

The engines of the LIVI/N series are equipped with a manoeuvring box with an integrated 433 MHz receiver and mechanical or magnetic endpoints.

OXYGEN ARTEMIS 230V sliding motor for residential sliding doors up to 800 kg, with built-in receiver box.

The 230V electromechanical ARTEMIS motor is thought to power light or heavy doors up to 800 kg for residential use.

OXYGEN NYX 230V motor for residential sliding doors up to 1,000 kg, with built-in box-receiver and mechanical racing ends.

The 230V NYX electromechanical motor is thought to power light or heavy doors up to 1,000 kg for residential or industrial use.