List of products by brand Clemsa

RFID proximity key from Clemsa for the readers CK40 and CK42.

The TSM 2 U traffic light control module is a device for regulating the passage of vehicles through traffic lights.

It is indicated for the passage control in garages with entrance and exit by the same door, two-way parking ramps, accesses to businesses by two-way barriers and all situations where it is necessary to regulate the passage of vehicles through a single point through traffic lights.

With this electronic card you can light up your garage by opening the door to the entrance or exit.

It is very easily placed on the control board and can be programmed to be turned on by pulse or timer.

System to control capacity a business, office, swimming pool or commercial premises in a simple and intuitive way.

Autonomous operation. What. All you have to do is type in the maximum capacity you want for the establishment.

Manufacture from materials of any heading Clemsa F35 mirror fed to 12/24V with retro-reflector up to 12 metres and IP66 protection.

Magnetic contact Clemsa CM1 for pedestrian doors. What. Medium power. In the case of vehicles of categories M1 and N2. Surface installation. 6 terminals. High power.

Of a thickness of Clemsa model BAPZ, which prevents pedestrians from catching their fingers on the hinge edge.

Industrial radars Clemsa with opening and opening sensors with presence detection.

Laser sensor or Barrier scanner Clemsa XGUARD for motion and presence detection.

Impulse garage light card Clemsa TG3 for old CLAS manoeuvres.

Timed garage light card Clemsa TG2 for old CLAS manoeuvres.

Electromechanical 230 V articulated arm motor Clemsa "AA 7002 B' with lock for residential overhangs up to 3 m per sheet.

KIT Sliding engine Clemsa "AC862N" electromechanical 230 V for residential doors up to 800 kg. It incorporates a manoeuvre chart CLAS62C. The actuator has magnetic running ends, levered unlock system, aluminum body painted with polyester powders and ABS crankcase. in addition, thanks to its anti-crush system and smooth stopping we will have an engine with reliability and maximum precision.

KIT Sliding engine Clemsa "AC424N" electromechanical 24V heavy use for residential doors up to 400 kg. Includes Sprint M24 maneuver board. The actuator has magnetic running ends, levered unlock system, aluminum body painted with polyester powders and ABS crankcase. in addition, thanks to its anti-crush system and smooth stopping we will have an engine with reliability and maximum precision.

Totem for installation of accessory equipment at access points for passenger carsfor the purposes of this regulation, the following definitions shall apply:.

Surface element installation plate for the installation of embedded devices. On the inside disone of installation trays, support for installation of dIN rail and cable guide.

KIT Sliding engine Clemsa "AC862N" electromechanical 230 V for residential doors up to 800 kg. It incorporates a manoeuvre chart CLAS62C. The actuator has magnetic running ends, levered unlock system, aluminum body painted with polyester powders and ABS crankcase. in addition, thanks to its anti-crush system and smooth stopping we will have an engine with reliability and maximum precision.

Sliding engine Clemsa "AC562N" electromechanical 230 V for residential doors up to 500 kg. It incorporates a manoeuvre chart CLAS62C. The actuator has magnetic running ends, levered unlock system, aluminum body painted with polyester powders and ABS crankcase. in addition, thanks to its anti-crush system and smooth stopping we will have an engine with reliability and maximum precision.

KIT Sliding engine Clemsa/Genius BLIZZARD electromechanical 230V for residential doors up to 500/900KG. It incorporates maneuvers. The Driver has magnetic career endings, levered unlock system, aluminum body painted with polyester powders and ABS crankcase. in addition, thanks to its anti-crush system and smooth stopping we will have an engine with reliability and maximum precision.

Motor gearbox Clemsa AB for tilting doors or chain drag.

Engines for tilting doors models Clemsa AB 2315 FC, AB 2350 / 2350 FC, AB 2360 / 2360 FC, AB 2362 / 2362 FC, AB 2364 / 2364 FC, AB 2366 / 2366 FC, AB 2368 and AB 2369 have been developed to be used as an engine element in all types of docks and counterweight doors.

They are robust, reliable and suitable motors for continuous and heavy work. No maintenance and very quiet.

Decoder card CLEMSA TD420/U RFID MUTANcode 400 users for connecting readers CK40/42and external RET antennas in transmitters and receivers.

Contactless proximity key reader Clemsa CK40 1 channel and CK42 2 channels for use with TD420/U decoders.

Casing or adapter Clemsa AD2000 for RFID readers of models CK40, CK42.

Control of self-contained RF/RFID access Clemsa MC1500/1800 (issuers and keys). It incorporates a TD420 decoder card.

Anti-vandal switch 230V/24V with custom key

Advanced MUTANcode programmer which allows RIFD management. Facility management by PC for access control.

MUTANcode and MUTANcode remote controls via PC and SW 3 software (Included).

" THE CLEMSA PT4 PROGRAMMER HAS BEEN DELISTED FOR THE HIGHER PERFORMANCE PT8 MODEL "

The outer receiver Clemsa Mutant code RN44 is the most versatile of the family of Clemsa, and a width of not more than 50 mm, with a power supply of 230 Vac or 12/24 Vac/dc. Frequency 433.92 MHz or 868 MHz.

This is a universal receptor, wired and powered at 12/24V up to 400 users with 2 channels a frequency 433,92 MHz or 868 MHz.

Outer receiver Clemsa MasterCode RV44, frequency 433.92 MHz 4 channel 230Vac or 12/24V ac/dc power supply.

Memory Clemsa TM400 MUTANCODE of 400 users.

Compatible with frames and receivers Clemsa from the MUTANCODE series.

Wired receiver Clemsa Mastercode "RMV 2U" 12/24V 433 MHz with two channels.

The universal receiver 'RMV 2U' is fed to 12/24V ac/dc to be able to be connected in any manoeuvring frame which has an alternate button output.

Outdoor antenna designed for installations with reception problems due to obstacles such as metal surfaces, radio shadow zones or long distances.

The external antenna RET 400 needs to be connected a decoder card or Access Control, replacing these to the affected receivers if necessary. This connection is carried out using only two wires, so the installation is simple by taking advantage of cables from old installations of other equipment

Receptor Clemsa Long-range Mutancode RNE 248 U LR in frequency 433.92 MHz and 868.35 MHz designed to deliver maximum performance and security in access automation systems. This model has 2 relay outputs, which allows to control up to two different accesses, such as garage doors, automatic gates or alarm systems.

Plug-in receiver card Clemsa "RNE248" frequency 433 MHz & 868 MHz, 2 channels with memory up 400 users.

The receiver can operate independently at 433 MHz or 868 MHz and is compatible with Mutan and Mutan-II broadcasters.

Adapter for new cards Clemsa Master code RMV and mutant code RNE248.

Adapter Clemsa ADT 5 A to insert RNE248 (4 pins) cards in maneuver boxes FAAC (6 pins).

Adapter Clemsa ADT 3 B to connect MutanCode cards to Motors FAAC.

Other, of circular cross-section Clemsa Mastercode "RMV 2" 433 MHz with two channels.

The receiving card 'RMV 2" connects directly to manoeuvring frames Clemsa have at their disposal connection 4 pins which allows us to connect directly to the circuit board without the need for wiring.

Plug-in receiver card Clemsa Mutated for 400 users, of 2 channels at 433,92 MHz and 868 MHz on the same receiver. Compatible with the Mutan and Mutan-II emitters.

Hydraulic oil Clemsa/FAAC in a 2-litre bottle.

CN20 Nervous Caps for Engine Clemsa AB10BC (6 units)

Plastic garage control board Clemsa Mutancode Mini in grey.

Spare Clemsa AA300 / AA400 small pieces Mistral Sirocco.

Unlock lock with Key Clemsa for AC Motors 424 N, AC 824 N, AC 562 N and AC 862 N.

Unlocking motor batten Clemsa AA300/AA400 with light bulb and keys.

The Unlocking Handle Clemsa It is the original spare part designed for engines Ac562n and Ac862n. It allows to perform the manual opening of the automation in case of electrical failure or maintenance.

Software engineer Clemsa PT8 for facility management by Software SW8 for the management of Mutan-II and MutanCode systems via Smartphone (Android).

Guide to Strap for Secondary Motor Clemsa AS60/AS100 and FAAC D600/D1000

Iron Guide with Correa for Secondary motor Clemsa AS60, AS120, and FAAC D600, D1000, which ensure smooth, silent and efficient operation of your garage door. Manufactured with high resistance materials, this guide offers a precise transmission and a long service life, ensuring the optimal performance of automatisms Clemsa and FAAC.

Control panel Clemsa CLAS 60 V programmable with switch allowing installation of three-phase drives to doors where only 230 V single-phase power supply is available.