Transmitters and tubular fittings

Radio and central receiver NICE TT2N in miniature for the for use in the manufacture of motor vehicles.

Grade of protection IP20.

Simple and fast programming: using the dedicated key.

The presence of a signalling LED helps to follow the correct programming procedure by indicating, for example, exceeding the thresholds programmed in the climate sensor.

Receptor CAME RKLT-W50 for mechanical tubular motors up to 50 Nm and 500 W.

Module for the operation of 1 automatic open-stop-close in single or multi-group mode.

Control of household blinds Somfy Situation Pure II unidirectional 1 channel at 433,42 MHz.

Transmitter Nice ERA P6 for independently operating up to 6 blinds or awnings. What. RollingCode type radio frequency 433 MHz with a range of up to 200 metres outdoors and 35 metres indoors. Powered by two standard batteries for 2 years approx.

Action 49x150x14mm . With wall support included.

The NICE ERA P6 transmitter is compatible with the entire engine range Nice.

Transmitter Nice ERA P1 to operate one or a group of blinds or awnings. What. RollingCode type radio frequency 433 MHz with a range of up to 200 metres outdoors and 35 metres indoors. Powered by two standard batteries for 2 years approx.

Action 49x150x14mm . With wall support included.

The NICE ERA P6 transmitter is compatible with the entire engine range Nice.

List of adapters for tubular motor Motorline ∅45mm Compatible with 20nm, 30nm, 40nm, 50nm models for roller domestic blinds and curtains.

1 channel module for the operation of 1 automatic with step-by-step function (Open-Stop-Closure).

Accessory Motorline MTS041 To adapt crank MTS04 to the engine.

Hook crank for awnings Motorline 1640 mm.

Accessory Motorline Mts01 To adapt crank MTS04 to the engine.

Domì P6SV is a 6-channel portable radio transmitter for tubulent shutters and brand awning engines Nice.

Radio transmitter Nice ERA P VIEW multifunction with intuitive graphical interface, to manage up to 99 teams individually or in groups.

Era P View is a multifunction radio transmitter belonging to the “Era-P” family Nice; is intended to command automations for awnings, solar screens, blinds, gates and gates, lights and electrical appliances in general. In addition, it serves to activate and deactivate the Home System alarm system Nice.

Bidirectional radio transmitter Nice 3-channel Wall Domì W3C

Transmitter 1 channel Erreka 433.92 MHz for the SENA tubular engine.

Transmitter 4 and 8 channels Erreka 433,92 MHz for SENA tubular motor with LED display.

Control panel with built-in 433.92MHz receiver for SENA-C and SENA-CM models.

Outer receiver FAAC TM2 Compact for the TM2 POP range of transmitters.

Transmitter FAAC TM2 POP1 Frequency 433 MHz.

The transmitter has one channel.

Transmitter FAAC TM2 POP7 Frequency 433 MHz.

The transmitter has seven channels.

Transmitter FAAC TM XT1 433MHZ with 6 channels for tubing motors for household blinds.

Transmitter ALLMATIC CLARUS RollingCode 433 MHz

ALLMATIC CLARUS transmitters are available in 1, 6 or 12 easy-to-use and intuitive channels for home shutters.

Wireless wind and sun sensor CAME STRAUSS KLT SW.

The weather station CAME STRAUSS KLT SW operates wirelessly via radio to monitor the wind and sun weather conditions of the engines CAME both domestic blinds and awnings.

I command Motorline 8 channel MX92N with household blind holder, programming of daily events, creation of two different groups, allows general opening and closing of engines.

This module enables the opening and closing of blinds and blinds via the MCONNECT mobile application and it can be easily installed behind the wall switch.

For your convenience, you can set automatic opening and closing times. What. Also, because it's a Wi-Fi module, you can control the devices from anywhere and check their position.

Plate with bolt for: MOM 5 and MO6.

External receiver CAME RKLT-120 with built-in antenna and frequency 433 MHz for motoring blinds, awnings and curtains with an electromechanical power output of up to 800 W.

Plates, sheets and strip CAME for: MOM 5, MOM 6 and MO6. Measures 100 x 100 mm .

Transmitter CAME ELVIS 433.92 MHz with 15 white channels.

The 24-bit emitter has 4.194.304 for use in the manufacture of motor vehicles [1], for the radio control of curtains, blinds and retractable systems compatible with the KLT series.

Portable transmitter CAME 15 channels and frequency 869.50 MHz. Color white.

CAME omega Q10 between 44 and 48 mm

CAME insertion of safety bolt

Module for the operation of 1 automatic open-stop-close in single or multi-group mode.

15 channel transmitter for tube motor MTM frequency 433 MHz.

5 channel transmitter for tube motor MTM frequency 433 MHz.

Transmitter 1 channel for tube motor MTM frequency 433 MHz.

Chassis clip plate 50 x 68 mm for the MONDRIAN 4 of Ø 35 mm

Module for the operation of 2 open-stop-close automatic systems in single or multi-group mode.

Support CAME CHANTIER Ø45mm for compact box for tubular motors MONDRIAN 5.

Support bolt CAME THE FOLLOWING PARAGRAPH IS ADDED: for tubular motors with a diameter of 35 mm.

For use in the manufacture of motor vehicles CAME 40 X 0,6 MM MONDRIAN 4 Ø 35 mm, whether or not on a backing.

DOOYA transmitter 1 channel 433,92 MHz for tubular motors for household blinds (with fan function).

It incorporates a magnetic base to attach the controller to the wall.

Hexagonal curved axle of 60 mmfor tubular domestic blinds.

Quick support Erreka SENA-C for compact drawer.

Control of household blinds Somfy this Regulation shall be binding in its entirety and directly applicable in all Member States unidirectional 1 channel at 433,42 MHz.

Control of household blinds Somfy this Regulation shall be binding in its entirety and directly applicable in all Member States unidirectional 5 channel frequency 433,42 MHz.

DOOYA transmitter 15 channels 433,92 MHz for tubular motors for household blinds (with fan function).

The remote offers a plastic finish with a digital screen to switch between channels to make it work up to 15 household blinds. What. It incorporates a magnetic base to place the remote on the wall.

The transmitter frequency is 433.92 MHz and is powered by a 3V lithium battery (CR2032).