Intensive use motors for heavy doors, as well as for light, for accesses of great influx of vehicles where temperatures are extremely low.Stop very cold environments.Up to 700 kg and 6 m long.

Operator BFT LUX MB hydraulic at 230V other, not further worked than hot-rolled up to 300 kg in weight and 2’3 m in length. Useful range of 270 mm, maximum angle of 123o, hydraulic lock on closing and triangular key unlocking. Manoeuvre time is 23s. Power absorbed 250W.

Full range of highly intensive use oleodynamic pistons, suitable for any type of application: residential, industrial or community. Compact and robust, they can automate swinging cantilever blades up to 2.3 metres wide and weighing up to 300 kg.

Hydraulic motor FAAC 422 for residential or communal sliding doors of 1.8 m to 3 m each.

24 V hydraulic motor BFT "FAST ULTRA BT A' for hinged doors of heavy use up to 5 metres in length. It incorporates a selectable locking system and magnetic run ends.

Full range of highly intensive use oleodynamic pistons, suitable for any type of application: residential, industrial or community.

Hydraulic motor EMFA Global Reversible and Irreversible community sliding doors intensive use with force regulation and smooth stopping.

Engine FAAC Reversible and irreversible version for community sliding doors for heavy use.

KIT Hydraulic engine Aprimatic For the purposes of this Regulation, the following definitions shall apply:, ideal for powering community use doors with high vehicle traffic.

The hydraulic operator FORTY40BS for one- or two-bladed designed for continuous use with 100% working factor. What. It uses a 36 Vcc gearbox motor with «brushless» technology. It has an absolute linear encoder that allows an exact control of the position and speed of the door.

Hydraulic motor Aprimatic For the purposes of this Regulation, the following definitions shall apply:,ideal for powering community use doors with high vehicle traffic.

The hydraulic operator FORTY40BS for one- or two-bladed designed for continuous use with 100% working factor. What. It uses a 36 Vcc gearbox motor with «brushless» technology. It has an absolute linear encoder that allows an exact control of the position and speed of the door.

KIT Hydraulic engine Aprimatic FORTY 65 SP heavy use for hinged doors up to 6 metres in height. With installation of pump off the blade to prevent transmission of vibration the structure of the building.

Built-in anti-crush safety valves. Speed deceleration at the end of the route. 20mm diameter barrel and 270mm useful stroke.

Hydraulic motor Aprimatic FORTY 65 SP heavy use for hinged doors up to 6 metres in height. With installation of pump off the blade to prevent transmission of vibration the structure of the building.

Built-in anti-crush safety valves. Speed deceleration at the end of the route. 20mm diameter barrel and 270mm useful stroke.

OXYGEN ILIAD 230V hydraulic motor kit for heavy duty swing doors up to 4 metres per blade or 800 kg weight.

The heavy duty ILIAD series engines are ideal for powering residential, community or industrial swing doors with a 285 mm stem. Allows it to be configured to work unlocked, locked or semi-locked.

OXYGEN PARIS hydraulic motor at 230V irreversible heavy use for swing doors up to 3 meters per blade.

The engines of the PARIS series incorporate double lock but the use of electric lock is recommended, they have a 240 mm stem for residential or community doors up to 350 kg.

Kits OXYGEN ILIAD 230V hydraulic motors for heavy duty swing doors up to 4 metres per sheet or 800 kg weight.

The heavy duty ILIAD series engines are ideal for powering residential, community or industrial swing doors with a 285 mm stem. Allows it to be configured to work unlocked, locked or semi-locked.

Kit's OXYGEN hydraulic motors at 230V intensive use for swing doors up to 3 meters per sheet.

The PARIS series engines are available in: the following paragraph is added: (lock on opening and closing) and REVERSIBLE format (without locking with which electrical electric lock would be needed for locking the sheets in the closure). The actuators have a 240 mm stem for residential or community doors up to 350 kg.

Hydraulic motor FAAC 400 to 230 V for swing doors of 2,2 m to 7 m per sheet. What. Ideal for powering residential or community doors.

Hydraulic motor EMFA TOR 4A & TOR 5A for heavy use swing doors for residential, community or industrial canopies for leaves from 4 metres to 7 metres in length.

230 V Medva HLR hydraulic motor for residential and community swing doors a maximum length of 3 and 6 metres.

Improvements to the actuator have been applied that make it quieter and faster, offering a higher opening and closing speed.

Engine with a new pump, makes it faster and quieter.

Patented adjustable ring system on the stem to adjust the degrees of aperture, smooth stop adjustable at opening and closing.

Connection to hydraulic lock.

230V Medva ECO hydraulic motor for residential and community swing doors with a maximum length of 4, 6 and 7 metres depending on the model.

Improvements have been made to the actuator to make it quieter and faster, offering higher opening and closing speeds

Patented adjustable ring system on the stem to adjust opening degrees, adjustable soft stop at closing.

Machinery for making pulp of fibrous cellulosic material, except in the BACN model.

Motor reducers DEA OLI/N hydraulic 230V rod 270/400mm for swing doors.

Optimal materials, compact structure and adjustable power allow their use even in continuous working situations. Precision mechanics and the use of hydraulic oil as a motor fluid are the secret to a quiet movement.

Installation is quick and easy and requires no modification of the door structure.

Engine range BFT LUX hydraulic 230V very intensive use 2 to 5 m long.

Full range of hydraulic operators at 230V for very intensive use, suitable for any installation, suitable for swing doors up to 800kg in weight and 5m in length.

Hydraulic motor Aprimatic model FORTY 270 for one- or two-bladed heavy-duty canisters, in the 270mm and 390mm version.

Hydraulic motor Aprimatic model FORTY 270 for one- or two-bladed heavy-duty canisters, in the 270mm and 390mm version.

Hydraulic motor V2 URSUS 230V for heavy duty swing doors, sheets up to 4 or 6 meters long designed to power canopies of community garages.

Linear hydraulic motor Erreka VULCAN for swing doors residential, community and industrial with a maximum blade length of 6 metres.

Full range: reversible and locked actuators, with for use in the manufacture of motor vehicles.

Motor for sliding doors Hy-Dom for heavy duty at 230v. What. It incorporates an angle reader (encoder) and an anti-crushing system at opening and closing, a manual assistance manoeuvre activation system, and detection in case of untimely closure of the door by a gust of wind.

Hydraulic motor HYDOM 4LR Semi-Intensive for swing doors for residential use up to 3.5 metres per blade. What. The actuators are powered at 230V and have 250mm stroke, hydraulic damping in opening and closing, available version without lock and with double lock.

Motor for sliding doors Hy-Dom for heavy duty at 230v. What. It incorporates an angle reader (encoder) and an anti-crushing system at opening and closing, a manual assistance manoeuvre activation system, and detection in case of untimely closure of the door by a gust of wind.

Hydraulic motor for residential use with damping and locking for swing doors up to 2,5 metres. Semi-intensive use ideal for residential garage or for community garage of 4 to 6 owners.

Motor for sliding doors Hy-Dom for heavy duty at 230v. What. It incorporates an angle reader (encoder) and an anti-crushing system at opening and closing, a manual assistance manoeuvre activation system, and detection in case of untimely closure of the door by a gust of wind.

KIT Hydraulic motor HYDOM 4LR Semi-intensive for swinging doors residential use up to 3,5 metres per blade. What. The actuators are powered at 230V and have 250mm stroke, hydraulic damping in opening and closing, available version without lock and with double lock.

KIT Hydraulic motors HYDOM 4LR Semi-intensive for swinging doors residential use up to 3.5 metres per sheet. What. The actuators are powered at 230V and have 250mm stroke, hydraulic damping in opening and closing, available version without lock and with double lock.

Hydraulic motor EMFA Tor 2000, for heavy use swing doors of a maximum blade length of 4/6 metres (600KG/800kg), with an elegant triangular design.

KIT Hydraulic engine EMFA Tor 2000, for heavy use swing doors of a maximum blade length of 4 metres (600 kg) for stem 250, or of a maximum length of 6 metres (800 kg) for stem 400. It offers an elegant design in triangular edition.

KIT of 2 hydraulic motors EMFA Tor 2000, for heavy use swing doors of a maximum length of 4 metres per sheet ((600KG), with an elegant triangular design.

With the Lineal Low engine, it's no longer a problem to power a community door. With our reader system angle the automatism recognizes the position and function to be performed.

The Lineal Low incorporates an angle reader (encoding) which allows us to have no quotas in the case of vehicles with a maximum design speed exceeding 50 km/h, the maximum design speed shall not exceed 50 km/h.

Hydraulic operator Aprimatic FORTY 4 for swing bars one or two leaves, residential use.

Built-in anti-crush safety valves. Quick emergency release. Useful length of stem 270 mm. Stem diameter is 18 mm.

KIT Hydraulic operator Aprimatic FORTY 4 for swing bars of a leaf for residential use.

Built-in anti-crush safety valves. Quick emergency release. Useful length of stem 270 mm. Stem diameter is 18 mm.

KIT Hydraulic operators Aprimatic FORTY 4 for swing bars of two leaves for residential use.

Built-in anti-crush safety valves. Quick emergency release. Useful length of stem 270 mm. Stem diameter is 18 mm.

Hydraulic operator Aprimatic TWENTY 270 for swinging canes one or two leaves, semi-intensive use. Speed deceleration closing. Built-in anti-crush safety valves. Quick emergency release. Useful length of stem 270 mm. Stem diameter is 16 mm.

Hydraulic operator Aprimatic TWENTY 270 for swinging canes one or two leaves, semi-intensive use. Speed deceleration closing. Built-in anti-crush safety valves. Quick emergency release. Useful length of stem 270 mm. Stem diameter is 16 mm.

Hydraulic operator Aprimatic TWENTY 270 for swinging canes one or two leaves, semi-intensive use. Speed deceleration closing. Built-in anti-crush safety valves. Quick emergency release. Useful length of stem 270 mm. Stem diameter is 16 mm.

Kits Linear hydraulic motors Erreka VULCAN intensive use for double swing doors residential, community and industrial with a maximum leaf length of 4 or 6 metres depending on the chosen stem.

Kits Linear hydraulic motor Erreka VULCAN intensive use for swing doors residential, community and industrial with a maximum leaf length of 4 or 6 metres depending on the chosen stem.

Hydraulic operator Forsa HALF TANK for sliding doors of Community use for leaves up to a maximum length of 7 metres.

Hydraulic motor Forsa FULL TANK for community or industrial use sliding doors for sheet metal maximum length of 7 metres the weight of the product.

Hydraulic operators BFT GOLD, suitable for residential use and small communities, very compact and robust. They can automate cancellation sheets other, of circular cross-section of width and, as not more than 180 kg. What. Irreversible version (lock), guarantee maximum precision of force regulation thanks to bypass valves.

Hydraulic operators BFT GOLD, suitable for residential use and small communities, very compact and robust. They can automate cancellation sheets other, of circular cross-section of width and, as not more than 180 kg. What. Irreversible version (lock), guarantee maximum precision of force regulation thanks to bypass valves.