Motor DMIL RAYO 1 electromechanical 230V for residential revolving doors up to 9m2, the manoeuvre chart (DEVELOPMENT) built-in analogue and emitter compatible receiver Forsa 868 MHz.

Garage crew Forsa model TP2 Mini with RollingCode coding system at 868 MHz.

This emitter comes with the standard code, so it won't work in garages where an installer has put in a custom code. It is 100% compatible with the receivers and receiver cards of this website Tecnoparking. Activation can be done by the receiver button or remotely by radio with a pre-programmed control.

Replacement End of career Forsa VENUS left with their microinterruptors and connected.

Electronic plate FORSA/SEA "SLIDE DG" with digital programming for sliding or swinging 230Vac doors.

Garage handle Forsa DELTA 4 channels to 433.92 MHz.

Garage crew Forsa Delta 4 channels at 433.92 MHz.

Infrared radar Forsa New EVOLUS/NEPTIS Dual technology with sensitivity adjustment.

Disco Ferodo Forsa UNIKO (new model)

Disco Ferodo Forsa UNIKO (new model)

Wireless radio switch or selector at 868 MHz, two contacts, for opening automatic retractable doors such as shop shades. Easy installation thanks to its wireless system and surface selector placement.

Electronic plate Forsa ERG 24V replacement for the tilting motor, which has a display for programming parameters and memory of remote controls.

Table NO incorporates built-in receiver, must therefore be added in an additional form by inserting it into the corresponding socket.

Other, of circular cross-section Forsa S-500 at 868 MHz for TP-2 transmitters.

KIT Operator FORSA NEPTIS 120 Brushless to automate pedestrian swinging doors. What. With an internal opening guide and a digital function selector.

NEPTIS operators are designed to drive residential pedestrian beating doors such as private homes, offices, commercial premises, etc., as well as community doors such as lobbies or building doors to neighborhood communities.

NEPTIS is designed for doors of large dimensions and/or weight, as well as doors for public, community, commercial or emergency use.

Replacement assembly plate end-of-race coil engine Forsa IT'S UNIQUE.

Receiver Forsa ST500 wiring with 2 independent channels frequency 868.35 MHz for TP2/TP4 commands.

Maneuvering frame for roller blind JCM Forsa with Receptor and RadioBand

Electromechanical retractable step resistor Forsa EASY up to 500 manoeuvres every 24 hours.

The deterrent is the ideal solution for vehicle traffic management respecting modern canons of street furniture. It can be used for access control applications or to protect private areas with maximum security.

End of race and motor spring DMIL TIFON.

Guide to sectional motor belt Forsa DELTA.

External receiver FORSA RT-500 at 230 Vwith a capacity of 500 users for NEO RT transmitters.

TRTA channel expansion card compatible with receivers Forsa.

F3-Q runner motor F3-Q FORSA P-350SPEED.

Box receiver Forsa model CRE800 powered at 230Vac for issuers RollingCode Forsa at 868 MHz, with internal memory of 15 codes (expandable with external memory).

It allows two types of operation: step by step and man present.

Table of manoeuvres Forsa SWING 2 DG for doors with one or two motors at 230 V.

Table of manoeuvres Forsa "FOR M-22' for one- or two-bladed reciprocating engines residential or community use. Includes built-in 500-code receiver.

Table of manoeuvres Forsa "PNG-20' 230 V for tilting and swinging doors of 1 or 2 sheets.

Box PNG-20 is provided with a socket to insert radio frequency and traffic light receiver cards.

Table of manoeuvres Forsa-SEA 'Gate 1 DG' for electro-mechanical operators of 230 V. What. The Gate 1 electronic board can be continuously updated and customized when combined with the Jolly Programmer module. Its comprehensive features include a dedicated 8K2 security edge input, encoder and boundary switch support.

The plate has a display to perform parameter configuration and programming adjustment of paths and actuator force.

Table of manoeuvres Forsa GATE 2 DG to Pylon KAPPA.

DMIL TIFON 20 II EVO sliding door motor a 230Vac with encoder and end of mechanical race for industrial doors up to 2000KG. It is equipped with built-in 868 MHz radio and maneuver frame.

KIT Mechanical race finish with limit switch encoder for the SEA and FORSA SATURN/BOXER/MERCURY models.

Battery with SEA motor and FORSA models MERCURY/SATURN/BOXER.

Side drive chain Forsa VENUS (5 m).

Sliding engine Forsa BETA 230V or 24V format for residential lamps up to 500/800 KG. What. The actuators incorporate a manoeuvring box and a built-in receiver, with magnetic end and anti-lock system.

Replacement crown Forsa Saturn Ø76 for use in the manufacture of motor vehicles.

Engine Forsa Electromechanical ERG 24V for revolving doors of a thickness of residential use up to 10m2. What. With encoder and end-of-course micro-switches on opening and closing. Unlocking by lever, maneuver board, anti-crush system, courtesy light and unlocking in case of power failure.

Engine Forsa Electromechanical ERG 24V for revolving doors of a thickness of residential use up to 10m2. What. With encoder and end-of-course micro-switches on opening and closing. Unlocking by lever, maneuver board, anti-crush system, courtesy light and unlocking in case of power failure.

Telescopic harnesses and torsion bars Forsa I MEAN, ERG.

Engine Forsa VENUS broadcast chain for motoring machinery for making pulp of fibrous cellulosic material and/or heavy use.

Engine Forsa ONLY 60 for roller shutters up to 112 kg.

As a result of the tireless search for improvements in the functional characteristics of our automatic doors and thanks to innovative construction solutions, we present a team capable of adapting to all the rolling doors with a balanced axis.

Bi-engine Forsa Unless otherwise specified in the EU-type examination certificate, the requirements of this Regulation shall not apply for roller shutters up to 153 kg.

As a result of the tireless search for improvements in the functional characteristics of our automatic doors and thanks to innovative construction solutions, we present a team capable of adapting to all the rolling doors with a balanced axis.

Motor 1 or 2 coils Forsa Saturn for 76 mm roller shutters of a diameter and pulleys of 240 mm.

Engine Forsa ZETA axle traction for sectional doors up to 28m2 with unlock and chain of 6 meters, Receiver and 2 868 MHz transmitters.

KIT engine Forsa VENUS single phase 230V chain drive for motoring machinery for making pulp of fibrous cellulosic material and/or heavy use.

Motor DMIL RAYO 1 electro-mechanical 230V with running end and encoder, for residential swing doors up to 9m2, the manoeuvre chart (DEVELOPMENT) built-in analogue and emitter compatible receiver Forsa 868 MHz.

The RAYO 1 EVO engine can be installed in 1 or 2 hinged doors.

DMIL "TIFON 8 EVO" 230Vac sliding motor for residential canals up to 800 KG.

The operator has mechanical race terminals, optical encoder and obstacle detection.

DMIL HURACAN 35 engine for swing doors up to 2,5 metres by sheet with built-in running ends.

Sectional engine Forsa DELTA for residential sliding doors up to 18 m2 with built-in receiver box and manual unlock.

Automatic self-locking 24Vdc for residential sectional doors and overhangs In the case of vehicles of categories N1 and N2.