List of products by brand DITEC

Table of manoeuvres DITEC LCU30H for 1 or 2 motors at 24 Vdc with display programming.

The boards of the Ditec LCU series make it possible to easily configure, by means of the display, the operating modes and to control at all times the position and speed of the, allowing regulation of acceleration, deceleration and start time, deceleration space and approach speed in opening and closing. Thanks to the additional plug-in cards it is possible to further expand the functionalities of the facility with self-controlled security bolts, magnetic loop detector, Bluetooth module.

Table of manoeuvres DITEC LCU40H for 1 or 2 motors at 24 Vdc with display programming.

The boards of the Ditec LCU series make it possible to easily configure, by means of the display, the operating modes and to control at all times the position and speed of the, allowing regulation of acceleration, deceleration and start time, deceleration space and approach speed in opening and closing. Thanks to the additional plug-in cards it is possible and

KIT Electromechanical engines DITEC PWR25H 24V for heavy use swing doors with a leaf length of up to 2.5 metres.

The irreversible actuator DITEC 24Vcc PWR25H is intended for frequent and intensive use. With machinery for making pulp of fibrous cellulosic material.

Ditec BOX3EH 24V electromechanical motor for residential swing doors up to 7m2, with e1HBOX manoeuvre chart in addition, it is important to ensure that the system is fully functional.

KIT Electromechanical engines DITEC PWR35H 24V for heavy use swing doors with a leaf length of up to 3.5 metres.

The irreversible actuator DITEC The 24Vcc PWR35H is intended for frequent and heavy use. With machinery for making pulp of fibrous cellulosic material.

KIT Electromechanical engines DITEC PWR25H 24V for two heavy duty swing doors with a leaf length of up to 2.5 metres.

The irreversible actuator DITEC 24Vcc PWR25H is intended for frequent and intensive use. With machinery for making pulp of fibrous cellulosic material.

KIT Electromechanical engines DITEC PWR25H 24V for two heavy duty swing doors with a leaf length of up to 3.5 metres.

The irreversible actuator DITEC The 24Vcc PWR35H is intended for frequent and heavy use. With machinery for making pulp of fibrous cellulosic material.

KIT Electromechanical engines DITEC PWR50 24V for heavy use swing doors with a leaf length of up to 5 metres.

The irreversible actuator DITEC The 24 Vcc PWR50 is intended for frequent and intensive use. With machinery for making pulp of fibrous cellulosic material.

KITs Electromechanical engines DITEC PWR50 24V for heavy duty double swing doors with a leaf length of up to 5 metres.

Reversible actuator DITEC The 24 Vcc PWR50 is intended for frequent and intensive use. With machinery for making pulp of fibrous cellulosic material.

Ditec ION electromechanical motor with 24 V virtual encoder for residential sliding doors up to 400 kg (ION4) or 600 kg (ION6), with obstacle detection and force regulation.

Ditec magnetic race finishes for sliding motors.

Emergency Batteries 12V DITEC DAS901BAT1

Keep your automatisms always operational even in case of electrical cutting with the Disec DAS901BAT1 emergency battery.

Mechanical function selector DITEC with key drive, with 5 positions, for DAS107PLUS and DAS200.

Functional programmers to configure the different Automatic doors operating modes. Available with drive by selector or key, they are composed of a robust container of plastic material for external mounting or to embed on wall.

Ditec E1HBOX electronic board with built-in receiver with potentiometers to regulate force and manoeuvre times.