• Lunes a jueves 9h a 14h & 15h a 19h • Viernes 9h a 14h
Table of manoeuvres DITEC LCU40H for 1 or 2 motors at 24 Vdc with display programming
Referencia: LCU40H
€210.00
IVA excluido

254,10 €

IVA incluido

Table of manoeuvres DITEC LCU40H for 1 or 2 motors at 24 Vdc with display programming.

The boards of the Ditec LCU series make it possible to easily configure, by means of the display, the operating modes and to control at all times the position and speed of the, allowing regulation of acceleration, deceleration and start time, deceleration space and approach speed in opening and closing. Thanks to the additional plug-in cards it is possible and

Quantity

 

We ship your order in 24/7 hours

 

Payment by credit card, bank transfer, Paypal or Bizum

 

Free shipping to the peninsula

Table of manoeuvres DITEC LCU40H for 1 or 2 motors at 24 Vdc with display programming.

The boards of the Ditec LCU series make it possible to easily configure, by means of the display, the operating modes and to control at all times the position and speed of the, allowing regulation of acceleration, deceleration and start time, deceleration space and approach speed in opening and closing. Thanks to the additional plug-in cards it is possible to further expand the functionalities of the facility with self-controlled security bolts, magnetic loop detector, Bluetooth module.

Ditec LCU boards are distinguished by their ease of use (thanks to the state-of-the-art self-learning procedure in the installation phase) and by technology with Virtual Encoder (which ensures constant control of impact forces and immediate detection of obstacles; it thus complies with standard 13849 with or without the installation of active burrels). In case of problems, data logging via LED display (LCU30H) or via microSD and dedicated software (LCU40H) makes it possible to analyze the chronology of the latest alarms, considerably simplifying the location of anomalies and maintenance. Through SW Amigo (available for free in the download area of the website) the data can be accurately viewed and analyzed.

Quality certified by TUV Rheinland!

■ pre-installed 433 MHz radio receiver module (switchable with 868 MHz module)

■ removable memory module

■ GREEN MODE function to reduce consumption to less than 1 W

■ preparation for solar and/or hybrid power

■ protection grade IP55 plastic container

■ operating temperature of -35°C / + 55°C (with NIO function)

■ dimensions HxLxP: LCU30H: 261 x 187 x 105 mm LCU40H: 357 x 238 x 120 mm

TECHNICAL CHARACTERISTICS

  • FoodOther: 230 V~ 50/60 Hz
  • Consumption: 0.6A
  • Fuse: F2A
  • Engine outputIn the case of vehicles of categories M1 and N2
  • Power supply permanent accessories: 0-30 24V 0.15A
  • Power supply accessories 0-1 (The sum of fittings 0-30 and 0-1 shall in no case exceed 0,5A): 24V 0,5A
  • Temperature of the room: -20°C - +55°C
  • Memorizable radio codes: 100 / 200 see also RO → MU → 20/10 (Section 11.6)
  • Radio frequency433.92 MHz
  • Degree of protection of the container: IP55
  • Product dimensionsThe following: 238 x 357 x 120 
  • Operating cycles See the characteristics of the actuator used.

MANUAL

Instruction manual DITEC LCU40H

LCU40H

Data sheet

Type of frame
Frame for swing motor
Type of frame
Two-leaf pendulum board

Specific References

You might also like

Entrematic
Parking controls
I'm going to have to call you back
€26.00
Entrematic
Parking controls
I'm going to have to call you back
€26.00

Envios 24/72h

Envios gratuitos a peninsula

pedidos superior a 150€

Calidad al mejor precio

Tenemos las mejores marcas del

mercado en automatismos

Pago seguro

Métodos de pago por transferencia

tarjeta de crédito/débido o Paypal

Soporte técnico

Te asesoramos antes y después

de realizar tú pedido