SOMMER APERTO sectional motor "A 550 L" or "A 800 XL" for connectable doors, with separate control unit of the engine, receiver and integrated WiFi module.

Engine Nice SPIDER 1200BL WiFi integrated for sectional doors up to 17m2 or for a sheet of up to 19.5m2.

Equipped with integrated central and bidirectional receiver. System Wi-Fi integrated able to control automatism through the MyNice application, compatible with Android and iPhone.

SPIDER can also be integrated into the dometic ecosystem Yubii for use with devices Nice or third parties. The control will be done with the Yubii application along with other devices that have integrated into the ecosystem.

Engine Nice SPIDER 800 for sectional doors up to 11.4m2 or for a sheet of up to 12,6m2.

Equipped with integrated central and bidirectional receiver. System Wi-Fi with the device "BiDi WiFi" able to control automatism through the MyNice application, compatible with Android and iPhone.

SPIDER can also be integrated into the dometic ecosystem Yubii for use with devices Nice or third parties. The control will be done with the Yubii application along with other devices that have integrated into the ecosystem.

Motor head CAME VER10PLUS from 1000N to 24V with electronics for sectional doors up to 18m2.

Motor for sectional axle traction doors of the Medva type INDUS90230V electromechanical with 90Nm and built-in maneuver box.

Motor head Nice SPIN SN6021 650N for sectional doors up to 10,5 m2 con embedded table SNA20.

Important: The Guide is not included.

KIT engine Medva VULCANO for residential sectional doors with anti-crush and soft-stop system.

The operator has a maneuver board and a built-in receiver.

Sectional engine Forsa DELTA 806 for sectional doors up to 10 m2 of 600N with built-in receiver box, 2 RollingCode controls and manual unlock.

Automatic self-locking 24Vdc for residential sectional doors and swing doors up to 10 m2.

Sectional engine Forsa DELTA for residential sliding doors up to 18 m2 with built-in receiver box and manual unlock.

Automatic self-locking 24Vdc for residential sectional doors and overhangs In the case of vehicles of categories N1 and N2.

Motor head Medva Vulcan for residential sectional doors with anti-crush and soft-stop system.

The operator has a maneuver board and a built-in receiver.

Attention This product does not include the Guide. The engine head is supplied for use as a replacement.

Motor for sectional doors Aprimatic BLACK BOX 24V for semi intensive use.

» BLACK BOX 600 N for sectional doors up to 10m2

» BLACK BOX 800 N for sectional doors up to 12m2

» BLACK BOX 1200 N for sectional doors up to 16m2

Motorcycles Beninca VN.S/M & VN.ST/MT for industrial sectional doors up to 40m2.

Engine axle traction EMFA VNS for industrial type sectional doors with heavy use.

Motor head PUJOL "SPIDER PLUS" with built-in frame for sectional doors.

It doesn't include the Guide or Controls.

SPLIDER PLUS is a 24V operator for sectional garage doors with a tensile strength of 60 KG to 125 KG and heavy use. Area of the door max 16 m2. Opening speed 240 mm/sec.

Electromechanical axle traction operator BFT "PEGASO' for semi-intensive or intensive use to automate industrial sectional doors of 20m2 to 45m2.

Mechanical lock and end of run of absolute encoder with possibility of rapid ground regulation.

Operator BFT "TIZIANO B GDA 260 S01' for sectional garage doors with a tensile strength of 60 kg and heavy duty. What. Area of the door 10 m2. Opening speed 6.6 m/min. D-Track

With a thickness of only 13 cm, TIZIANO is one of the most compact operators on the market, so it can be installed in any architectural context.

Thanks to the radio receiver built into the control centre, the TIZIANO can memorize the code of 10 remote controls from the MITTO or KLEIO series and/or wireless control systems such as, for example, MIMEPAD or T-BOX.

Operator BFT "TIZIANO B GDA 260 S01' for sectional garage doors with a tensile strength of 60 kg and heavy duty. What. Area of the door 10 m2. Opening speed 6.6 m/min. D-Track

NotesThe following: this product consists only of the engine head, intended for replacement. If you need all the material to drive a section door, we have the FRENCH KIT.

Engine Forsa ZETA axle traction for sectional doors up to 28m2 with unlock and chain of 6 meters, Receiver and 2 868 MHz transmitters.

KIT Electromechanical engine V2 "ATRIS 700' Irreversible 24 V other, of circular cross-section, of iron or steel, with a starting force of 700 N (70 kg).

Engine attack to the axis PUJOL ELITE intensive use 24V for sectional doors of 20/35 m2 surface with running ends and encoder.

The engines of Motorline KVM205, KVM210 and KVM215 are three-phase three-axle traction motors powered at 230 V. With electronic end, for the automation of industrial sectional doors from 20m2 to 60m2, with possibility of horizontal or vertical application.

With a frequency converter system built into the power station, it enables smoother starts and stops and provides benefits such as: energy savings, process improvement and reduced mechanical maintenance.

KIT Motor PUJOL "SPIDER PLUS" 1250N for sectional doors of up to 16m2.

SPLIDER PLUS is a 24V operator for sectional garage doors with a tensile strength of 125 kg and heavy use. Area of the door max 16 m2. Opening speed 240 mm/sec.

KIT Motor PUJOL "SPIDER PLUS" 800N for sectional doors of up to 13m2.

SPLIDER PLUS is a 24V operator for sectional garage doors with a tensile strength of 80 kg and heavy use. Area of the door max 13 m2. Opening speed 240 mm/sec.

KIT Motor PUJOL "SPIDER PLUS" 600N for sectional doors of up to 10m2.

SPLIDER PLUS is a 24V operator for sectional garage doors with a tensile strength of 60 kg and heavy use. Area of the door max 10 m2. Opening speed 240 mm/sec.

Roof motor kit MEDVA PG120 of 1200N for sectional doors of a thickness not exceeding 16 m2 with steel split guide with strap. It incorporates a 433 MHz receiver with easy programming via its LED display.

Operator Aprimatic REDMATIC BOX 24V for residential sectional doors of 600/800/1200/1800 N.Equipped with an automatic path recognition system, deceleration in opening and closing phases and anti-crush sensitivity.

The ADVANCE N automation has been designed for sectional and tilting doors of piers up to 16 m, for residential use. It is a solution that is characterized by fast movement (19cm/s), low noise level and flexibility of use.

Motor chain drive DEA LATO for industrial sectional doors up to 35m2. What. Model in 230V and 400V version with manual or chain unlocking system.

Motor head PUJOL STC for sectional doors up to 10 m2 and 60 kg (STC600), or up to 15 m2 and 100 kg (STC1000) sectional doors. Built-in receiver maneuver board compatible with VARIO emitters.

Electromechanical engine Beninca 24V JM for sectional doors up to 22m2 with chain or belt guide and anti-crush system.

The SPACE N automation has been designed for sectional and swing doors of piers up to 16 m2, for residential use and medium to high intensity. A motor that is characterized by having a fast movement (24cm/s), silent and powerful.

Engine Nice Electromechanical SUMO 24Vdc for sectional doors and sliding doors of up to 35m2.

A voltage of not more than 300 V, of a kind used in motor vehicles. What. Ideal for heavy use.

Nuevo motorreductor NICE SPIDO de 600N con central y receptor integrados. Para puertas seccionales de hasta 9,6 m² y basculantes de hasta 10,5 m².

Control a distancia con la app MyNice Welcome mediante el Nice Core Wifi gateway para gestionar todos tus automatismos.

KIT engine Erreka SKY chain drive for industrial sectional doors up to 50m2. What. Available in single phase 230Vac and three phase 400Vac.

Engine Erreka SKY chain drive for industrial sectional doors up to 50m2. What. Available in single phase 230Vac and three phase 400Vac.

Engine Nice SPINKIT with traction with 550 N belt for sectional doors up to 8,8 m2, and swings up to 9,8 m2.

THE NICE SPIN ENGINE HAS BEEN REPLACED BY THE NEW MODEL NICE SPIDO600 WITH IMPROVEMENTS OVER THIS MODEL

Engine Nice SPINBUSKIT BD 24V 650N with magnetic encoder and two-way emitter, for sectional doors up to 10,5 m2, and for hinged doors up to 11,8 m.

Engine Nice Spykit 650/800 BD with two-way control for sectional doors up to 10,5 m2 (SPY650) and 12,5 m2 (SPY800), for tilting, overflowing and non- overflowing doors, up to 11,5 m2 (SPY650) and 14 m2 (SPY800).

High speed motor Nice Spykit 650 HS BD with two-way control for sectional doors up to 10,5 m2 and for overhead and non-overhead sliding doors up to 11,5 m.

Engine Nice 24 V SPINBUS with magnetic encoder for sectional doors of up to 17,5 m2 and tilting doors of up to 14,7 m2.

Irreversible electromechanical gearbox motor 230 Vac for residential use, 24 Vdc motor with magnetic encoder. Use with SNA30 - SNA31 strap guides or SNA30C - SNA31C chain guides.

Spin 650N NICE engine for sectional doorss up to 8,8m2 and swings up to 9,8m2.

Engine Motorline KVM2020 suitable for doors or bars of heavy metal or without spring clearance.

" The manufacturer has discontinued the KVM2020 model and offers us its new range ROLLING "

Engine Motorline KVM115 is an automatic axle traction, for automation of industrial sectional doors of up to 60 m2, with the possibility of horizontal or vertical application. The ease of installation, configuration and maintenance makes it ideal for all types of sectional doors.

Engine Motorline KVM110 is a drive shaft automatic, for automation of industrial sectional doors up to 48m2, with the possibility of horizontal or vertical application. The ease of installation, configuration and maintenance makes it ideal for all types of sectional doors.

Motor kit CAME Ver13plus from 1300N at 24V for sectional doors up to 21m2 with belt guide and Rollingcode Emitter.

Motor kit CAME Ver10plus of 1000N at 24 V for sectional doors up to 18 m with belt guide and Rollingcode Emitter.

Motor kit CAME Ver06 from 600N to 24V for sectional doors up to 9 m2 with chain guide and Rollingcode Emitter.

KIT engine Erreka Electromechanical IZAR at 24 Vdc, of chain for industrial sectional doors of up to 25m2.