Engine Motorline KVM110 is a drive shaft automatic, for automation of industrial sectional doors up to 48m2, with the possibility of horizontal or vertical application. The ease of installation, configuration and maintenance makes it ideal for all types of sectional doors.

Motor kit CAME Ver13plus from 1300N at 24V for sectional doors up to 21m2 with belt guide and Rollingcode Emitter.

Motor kit CAME Ver10plus of 1000N at 24 V for sectional doors up to 18 m with belt guide and Rollingcode Emitter.

Motor kit CAME Ver06 from 600N to 24V for sectional doors up to 9 m2 with chain guide and Rollingcode Emitter.

KIT engine Erreka Electromechanical IZAR at 24 Vdc, of chain for industrial sectional doors of up to 25m2.

Engine Erreka Electromechanical IZAR at 24 Vdc, of chain for industrial sectional doors of up to 25m2.

KIT Electromechanical engine V2 "ATRIS 1000' Irreversible 24 V for sectional and tilting doors of up to 15m2, with a starting force of 1000 N (100 kg).

Electromechanical engine V2 In the case of ATRIS 24V of a kind used in motor vehicles up to 15m2, with a starting force of 1000 N (100 kg)

Engine Nice SHEL75 of 750N at 24Vdc for doors other, of circular cross-section and doors other, of circular cross-section (of one sheet).

Includes receiver (built-in) and 2 NICE FLO4RCE controls.

Driving FAAC D1000 electromechanical 24 V by drawing for doors other, not further worked than hot-rolled and spring swings and counterweights for residential use.

Engine Erreka Sirius electromechanical 230Vac and 400Vac by chain transmission for hinged doors up to 50 m2.

Recommended installation in community and industrial doors.

Engine Motorline KVM105 is a drive shaft automatic, for automation of industrial sectional doors of up to 35m2, with the possibility of horizontal or vertical application. The ease of installation, configuration and maintenance makes it ideal for all types of sectional doors.

Engine Motorline KVM25 is a axle traction automation, for automation of other, of circular cross-section. What. It is ideal for all types of vertical opening doors due to its ease of installation, configuration and maintenance.

Machinery for making pulp of fibrous cellulosic material Motorline KFM, efficient and robust intensive use with built-in central.

KIT engine V2 Electromechanical JEDI 24 V irreversible for sectional and tilting doors up to 15 m2 with a starting force of 1000 N (100 kg).

" THE JEDI MODEL HAS BEEN DISCONTINUED AND REPLACED BY THE MODEL KIT ATRIS "

Engine V2 Electromechanical JEDI 24 V irreversible for sectional and tilting doors up to 15 m2 with a starting force of 1000 N (100 kg).

" THE JEDI MODEL HAS BEEN DISCONTINUED AND REPLACED BY THE MODEL ATRIS "

Motor head EMFA MTCH of 800N and 1,000N with built-in receiver box for residential sectional doors.

KIT Electromechanical engine V2 AZIMUTH irreversible for sectional and tilting doors up to 8 m2.Starting force 500 N 50 kilos .

Head Electric motor V2 AZIMUTH irreversible for sectional and tilting doors up to 8 m2.Starting force 500 N 50 kilos .

KIT engine EMFA MTCH of 800 N and 1000 N for residential-intensive sectional doors.

In the case of vehicles of categories M1 and N2 FAAC sectional

Driving FAAC D600 electromechanical 24 V by drawing for doors other, of circular cross-section and spring swings and counterweights for residential use.

Operator Aprimatic Electromechanical MATICBOX at 24 Vcc for residential use in spring doors and sectional doors, chain and belt drive. What. Equipped with an automatic path recognition system, deceleration in opening and closing phases and anti-crush sensitivity.

Electromechanical engine BFT BOTTICELLI SMART BT A for intensive or very intensive use, designed to automate sectional garage doors.

It has a very compact design, suitable for installation anywhere, thanks to the wide range of chain rails available in various lengths.

The control centre and the end of run with encoder and mechanical cap are incorporated, respectively, on the operator and the guide.

24 V motor DEA model TEO 700 of 1000N, designed to drive other, of circular cross-section. What. It is the manufacturer's cheap and easy to install solution DEA.

External unlocking for spring and sectional hinged doors (ROSSO EVO).

Electromechanical drive Erreka ZETA of 24 Vdc for residential sectional doors For the purposes of this Regulation, the following definitions shall apply:

Electromechanical drive Erreka ZETA of 24 Vdc for residential sectional doors For the purposes of this Regulation, the following definitions shall apply:

KIT 24V engine DEA model TEO 700 of 1000N, designed to drive other, of circular cross-section. What. It is the manufacturer's cheap and easy to install solution DEA.

KIT Sectional engine Pujol for sectional doors up to 10 m² /60Kg (STC-600) or doors up to 15m² /100Kg (STC-1000) is used. It has a chain-driven traction rail, soft stop, automatic closure and automatic obstacle detection.

Roof motor Motorline ROSSO EVO 1200N for sectional doors up to 18m2. What. It has a modern and innovative design, standing out in any environment.

Roof motor Motorline ROSSO EVO 1000N for sectional doors up to 15m2. What. It has a modern and innovative design, standing out in any environment.

Roof motor Motorline ROSSO EVO 600N for sectional doors up to 10m2. What. It has a modern and innovative design, standing out in any environment.

Roof motor Erreka NAOS for sectional garage doors up to 11m2 24Vdc with encoder capable of lifting up to 70 kg. What. Includes receiver for up to 20 codes.

KIT Motor NICE model SPINKIT 650N for sectional doors up to 8,8m2 and tilting doors up to 9,8m2. What. Leash traction.

The version in KIT comes with pre-assembled guide of 3m SPIN11KCE.

THE NICE SPIN ENGINE HAS BEEN REPLACED BY THE NEW MODEL NICE SPIDO600 WITH IMPROVEMENTS OVER THIS MODEL

KIT Roof motor Erreka MAXI 24V Intensive use 1200N for sectional doors up to 18m2. What. It has coding for self-learning of the route, anti-crush system and an independent maneuver board.

Roof motor Erreka MAXI 24V Intensive use 1200N for sectional doors up to 18m2. What. It has coding for self-learning of the route, anti-crush system and an independent maneuver board.

KIT Roof motor Nice SPY 550N 24V for automating sectional doors up to 9m2 and tilting doors (overflowing and non-overflowing) of a thickness not exceeding 10 mm. What. The SPY engine is ideal for residential use doors.

Electromechanical operator Clemsa AS60 (600N) or AS120 (1000N) for sectional doors up to 15m2 with built-in frame. Optimized installation times thanks to its patented three-step assembly. Courtesy light built in.

The KIT consists of a 230Vac electromechanical actuator with built-in box, RNE248U receiver and 2 NT2S emitters at 433 MHz.

The guide can be chosen at the choice of the customer according to their needs in our deployable.

Roof motor Erreka NAOS for sectional garage doors up to 15m2 24Vdc with encoder capable of lifting up to 100 kg. What. Includes receiver for up to 20 codes.

Roof motor Erreka NAOS of 700 N (NASR70E) and 1000 N (NAS100E) for sectional garage doors up to 11m2 and 15m2 respectively 24Vdc with encoder capable of lifting up to 70 and 100 kg. What. Includes receiver for up to 20 codes.