List of products by brand FAAC

Garage crew FAAC TM1868DS binary at 868 MHz.

The encoding of this emitter is done by a combination of 12 dip switches.

Garage crew FAAC TM2433DS binary at 433 MHz.

The encoding of this emitter is done by a combination of 12 dip switches.

Garage crew FAAC TM1433DS binary at 433 MHz.

The encoding of this emitter is done by a combination of 12 dip switches.

Emissor FAAC 2-channel XT2 SLH and 868 MHz frequency.

The programming or memorization of the new Emissor must be carried out by proximity or confrontation from an original command in operation.

* Special prices for professionals. Contact us to open your file.

Driving FAAC D1000 electromechanical 24 V by drawing for doors other, not further worked than hot-rolled and spring swings and counterweights for residential use.

Driving FAAC D600 electromechanical 24 V by drawing for doors other, of circular cross-section and spring swings and counterweights for residential use.

Kit Barrier shortage FAAC B614 in length 2 and 3 metres

Motor kit FAAC 740 EZ16 to 230V for residential sliding doors up to 500 kg.

Engine FAAC 740 (up to 500 kg) and FAAC 741 (up to 900 kg) with encoder for residential or industrial sliding doors. Incorporates maneuver board without receiver.

Traffic signalling system by means of a traffic light with an integrated receiver which changes from green to red by remote control.

Sensor FAAC XDT3 with dual technology for movement and presence for evacuation routes.

Aperture and security in one sensor. Safety control according to EN 16005.

Sensor FAAC XDT1 with dual technology for movement and presence.

Aperture and security in one sensor. Safety control according to EN 16005.

Sensor FAAC XV1 with dual technology for movement and presence.

Aperture and security in one sensor. Safety control according to EN 16005

Sensor FAAC XBFA of movement and presence over infrared radiation.

The ideal security for automatic curtain doors. Aperture and security in one sensor.

Compact radar FAAC XM100 ONE one-way microwave.

The smallest opening radar for doors.

Infrared sensor FAAC XPB-ON presence and movement, with active infrared technology with background suppression.

Safety photocell FAAC XP30 Wall-mounted or recessed transmitter-receiver, to be supplied at 24 V from a distance of up to 30 metres.

Column FAAC for photoportable cells with a height of 50 cm.

Radar FAAC XM 200 with microwave technology and radar matrix detection, which is very easy to configure with two buttons. Thanks to the accessories included, it is possible to install the radar on the wall or on the ceiling and provides an aesthetic result.

Sliding wheel FAAC A100/A1000 SLIDING GEAR ASSEMBLY.

Feeding group FAAC A100 Compact,is a feeding unit specifically designed for automatisms a100 Compact series sliding doors FAAC. This component is essential to ensure the correct functioning of the models A100, A140 AIR and A140 AIR T.

The electronic update kit FAAC 490114 is designed to modernize and improve motors of sliding doors FAAC 746MPS and 844MPS. This kit allows to replace the old control units, providing an efficient and up-to-date solution for door automation systems.

Electronic card FAAC E045 for one or two 230V motors.

Motor kit FAAC C720 (up to 400 kg) or C721 (up to 800 kg) heavy duty 24V for residential and community sliding doors.

Engine FAAC model C720 with 24V operation for light residential and communal sliding doors of up to 400 kg.

Automatic barrier Clemsa model B614 operating at 24 V, 100% continuous frequency with a maximum bar length of 2 to 5 metres depending on the bar selected, and an opening time of < 2 s (80o with a bar of 3 m).

FAAC XR2 868 C external bi-channel receiver / 4 channels at 868 MHz. What. External receiver (system with decoder integrated in a custom case for external use).

Compatible with controls XT-2 and XT-4 which you will find under "Product Accessories".

The radio system simplifies even complex installations, eliminating the need for wiring between the safety band and the automatic control panel.

ANDthe radio system consists of a receiver XR S 868, communicating with an emitter XT S 868, to which one or two 8,2 Kohm resistive safety bands or auxiliary devices may be connected.

" The safety belts on the product accessories are fully compatible "

Wall security photocell FAAC XP20 steerable transceiver system with a maximum range of 20 metres and IP protection.

This auxiliary safety device is used for all types of garage doors and locks, reversing the maneuver in case of infrared beam cut.

Engine FAAC model C721 with 24V operation for light residential and communal sliding doors of up to 800 kg.

In the case of vehicles of categories M1 and N2 FAAC sectional

Electronic card FAAC E145S for one- or two-bladed sliding doors and 230 V sliding motors.

Engine FAAC 412 electromechanical 230 V for hinged doors up to 6 feet, ideal for residential use.

Engine FAAC 413 electromechanical 230 V for residential swing doors of up to 1,80 m (without electric lock) or up to 2,50 m (with electric lock).

SAFEcoder absolute magnetic bus encoder (patented FAAC)

Frequency module FAAC XF 868 MHz, compatible with all devices FAAC they are equipped with OMNIDEC universal coding systems, recognisable by the logo applied.

Receiver FAAC RP 868 SLF plugged in, fast-coupling (compatible with all electronic devices FAAC of a kind used in motor vehicles 5 pin rapid coupling, or external utility by connecting to the interface of the accessory RP relay).

The radio system simplifies even complex installations, eliminating the need for wiring between the safety band and the automatic control panel.

The radio system consists of a receiver XR S 868, communicating with an emitter XT S 868, to which one or two 8,2 Kohm resistive safety bands or auxiliary devices may be connected.

" The safety belts on the product accessories are fully compatible "

Electronic plate for replacement Clemsa FAAC 740, 741 and 748 of sliding doors at 230 V.

Receiver adapter FAAC for use in the manufacture of motor vehicles. What. Allows the use of a receiver FAAC RP on frames not equipped with a plug-in card connector, the connection would be made to the alternate button of the manoeuvre box.

Oil engine FAAC 580 230V heavy-duty for counterweighted sliding doors up to 15m2.

Hydraulic motor FAAC 400 to 230 V for swing doors of 2,2 m to 7 m per sheet. What. Ideal for powering residential or community doors.

Hydraulic motor 230 V FAAC 593 for sliding doors up to 3500 mm wide and 2700 mm high.

Electromechanical engine FAAC 550 for hinged doors up to 12 m2 with the possibility of using a second 'slave' engine.

Curved telescopic sights for FAAC 550/593.