Proximity reader FAAC XTR B for access by RFID proximity key.

Readers FAAC Proximity XKPR with integrated keyboard for wall or column installation. Available in 125 KHz and 13,56 MHz versions.

FAAC XR2 868 C external bi-channel receiver / 4 channels at 868 MHz. What. External receiver (system with decoder integrated in a custom case for external use).

Compatible with controls XT-2 and XT-4 which you will find under "Product Accessories".

Frequency module FAAC XF 868 MHz, compatible with all devices FAAC they are equipped with OMNIDEC universal coding systems, recognisable by the logo applied.

Receiver FAAC RP 868 SLF plugged in, fast-coupling (compatible with all electronic devices FAAC of a kind used in motor vehicles 5 pin rapid coupling, or external utility by connecting to the interface of the accessory RP relay).

Receiver adapter FAAC for use in the manufacture of motor vehicles. What. Allows the use of a receiver FAAC RP on frames not equipped with a plug-in card connector, the connection would be made to the alternate button of the manoeuvre box.

KIT Batteries FAAC A952 with charger.

Set of mechanical end-of-work micros and frame for tilting motor FAAC 550.

Pinion Group C720 C721 FAAC 63003502

Sliding wheel FAAC A100/A1000 SLIDING GEAR ASSEMBLY.

Final reducer motor FAAC 550.

Housing FAAC D600 / D1000

Replacement plastic housing sectional engine FAAC D600 and D1000.

FAAC 63000709

Final race sensor FAAC 746-844-C851

Feeding group FAAC A100 Compact,is a feeding unit specifically designed for automatisms a100 Compact series sliding doors FAAC. This component is essential to ensure the correct functioning of the models A100, A140 AIR and A140 AIR T.

End of race with magnets for sliding motor FAAC 746/844.

Pinon Z16 FAAC for 746 and 844 piston engines.

Electronic plate FAAC 578d for automations of doors Slides or industrial gates at 230V.

The 578D card can be installed at a distance to control Sliding cancelas or industrial gates; It can also be inserted into a specific container equipped with a disconnector, teleketrons, control keypad and activation key.

Traffic signalling system by means of a traffic light with an integrated receiver which changes from green to red by remote control.

Adjustable fork FAAC for barrier support.The support for Barreras FAAC allows to be adjusted in height, fixing with anchorage on the floor and anti noise and vibration system.

Kit Barrier shortage FAAC B614 in length 2 and 3 metres

Parts and accessories FAAC 550 (length 1,5 m), with side support for motor installation FAAC 550 with telescopic rods.

Automatic barrier Clemsa model B614 operating at 24 V, 100% continuous frequency with a maximum bar length of 2 to 5 metres depending on the bar selected, and an opening time of < 2 s (80o with a bar of 3 m).

End of race spare 748 D

Key and command selector FAAC XK10 and XK11 for fitting or installing in columns. Available in 1 or 2 microinterruptors.

Maneuvering frame FAAC 455D for electromechanical or hydraulic motors of 230Vac.

The programming of the center FAAC 455D is performed using a Display of three pushers able to accurately configure all parameters of automatism.

Engine FAAC 950N2 for pedestrian sliding doors up to 367 kg.

Garage crew FAAC TM2433DS binary at 433 MHz.

The encoding of this emitter is done by a combination of 12 dip switches.

Garage crew FAAC TM1433DS binary at 433 MHz.

The encoding of this emitter is done by a combination of 12 dip switches.

Emissor FAAC 2-channel XT2 SLH and 868 MHz frequency.

The programming or memorization of the new Emissor must be carried out by proximity or confrontation from an original command in operation.

* Special prices for professionals. Contact us to open your file.

The electronic update kit FAAC 490114 is designed to modernize and improve motors of sliding doors FAAC 746MPS and 844MPS. This kit allows to replace the old control units, providing an efficient and up-to-date solution for door automation systems.

Electronic card FAAC E045 for one or two 230V motors.

Motor kit FAAC C720 (up to 400 kg) or C721 (up to 800 kg) heavy duty 24V for residential and community sliding doors.

Engine FAAC model C720 with 24V operation for light residential and communal sliding doors of up to 400 kg.

The radio system simplifies even complex installations, eliminating the need for wiring between the safety band and the automatic control panel.

ANDthe radio system consists of a receiver XR S 868, communicating with an emitter XT S 868, to which one or two 8,2 Kohm resistive safety bands or auxiliary devices may be connected.

" The safety belts on the product accessories are fully compatible "

Wall security photocell FAAC XP20 steerable transceiver system with a maximum range of 20 metres and IP protection.

This auxiliary safety device is used for all types of garage doors and locks, reversing the maneuver in case of infrared beam cut.

In the case of vehicles of categories M1 and N2 FAAC sectional

Electronic card FAAC E145S for one- or two-bladed sliding doors and 230 V sliding motors.

SAFEcoder absolute magnetic bus encoder (patented FAAC)

Electronic plate for replacement Clemsa FAAC 740, 741 and 748 of sliding doors at 230 V.

Curved telescopic sights for FAAC 550/593.

A pair of straight telescopic arms FAAC 550/593.

Pair of tubes FAAC 580 ZINC transmission with welded casing and bracket.

A pair of straight telescopic arms FAAC 580.

Electronic card 780 D for sliding motor FAAC 746 and 844.

The photocells FAAC MINISWITCH GLS function as safety aids. What. For its correct use, standard EN16005 should be taken as a reference in those countries where it is in force.

Parts and accessories of machinery FAAC 580, square format.

Motor mounting bracket or plate FAAC 580.

This support is what is placed on the door and on it is placed the hydraulic motor.

Pinon Z20 FAAC for 746 and 844 piston engines.