Safety Accessories

The MX14 and MR14 devices are a solution developed for the prevention of automated vehicle accidents, as required by EN 12978.

The MF2020 is a column photocell developed to safeguard all types of industrial doors (sectional and fast doors) up to a maximum width of 10 metres.

The sender and receiver create a infrared grating it offers protection up to eight feet high.

When the infrared beams are interrupted, a signal is sent to the control room. After the holding area is clear, a new signal is sent to the control to indicate that the area is clear.

Column support for photocells and complementary accessories Motorline.

LED flashing light in version 90-240 Vac and 12-36 Vdc with an integrated 433,92 MHz antenna.

Safety photocell Motorline MF40 with orientation sensor up to 180°.

✓ Integrated Amber or RGB flashlight lamp

✓ Exceptional detection range up to 40m

✓ Flexibility of installation without cables

✓ Autonomy and efficiency with solar panel and rechargeable battery

Microwave radar ideal for doors large and high ceiling locations, which can be installed up to 7 m high. Account with technology detection able to differentiate people and vehicles, reducing unwanted openings, thus saving energy loss.

12mm resistant safety band kit.

The band is prepared to be mounted directly into the installation wirelessly through a RadioBand.

Carlo Gavazzi security camera with cathode ray mirror, multi voltage (12/24V or 220V) with a maximum range of 12m.

This photocell is designed to withstand adverse industrial environments. What. The distance of detection of 12 m this makes it very useful in applications where dust and weather conditions affect the detection capacity. Housed in a other, not further worked than hot-rolled with two stop presses for easy connection.

Aluminium column pair BFT for photocells of the THEA, DESME and COMPACTA series. Height 522 mm

Lamps and lighting fittings Beninca "LAMPY" 230V with integrated antenna.

KIT Closing caps + cable insertion and rubber resistance V2.

Parts and accessories BFT AKTA to use the aluminum columns.

Infrared sensor FAAC XPB-ON presence and movement, with active infrared technology with background suppression.

Industrial radars Clemsa with opening and opening sensors with presence detection.

Laser sensor or Barrier scanner Clemsa XGUARD for motion and presence detection.

Industrial steerable photocell Erreka KLFRX traceable transmitter-receiver with obstacle detection and wide range.

Metallic protector Erreka LPRER4 for safety mirrors of photocells.

Mechanical safety belts against crushing for automatic doors or electromechanical barriers.

The LB mechanical belt is a mandatory safety system to comply with the regulations in force which protects us from being crushed by an automatic door or barrier, can be used in tilting, sectional doors, blinds and electromechanical barriers.

Passive band Erreka rubber bumper profile designed for automatic tilting, sliding or swinging doors.

LED signalling lamp V2 BLINKO multi voltage from 24 to 230 V.

Pair of optical equipment Nice FT210 adjustable at 210o for sensitive edges with wireless transmitter and mobile mounting.

Manufacture from materials of any heading CAME DLX synchronized infrared beams up to 30m.

Waterproof box button with OPEN, SHUT, and emergency STOP buttons.

Mechanical safety belt EMFA 70 mm by micro-switches, with cable voltage monitoring and sensitivity regulation.

It can be used for swinging or tilting doors, sensitive over the entire path of the band (including ends).

Security card EMFA "BSC-SC' to incorporate 8,2 KΩ safety-belt boundary for dead-end manoeuvring frames.

KIT Conductive safety-belt with unassembled aluminium and rubber 40 mm profile.

All kits come with 2-meter aluminium profiles, and the 40mm rubber comes to be easily assembled by gluing it on the front. On the other hand, each unit comes with its corresponding caps and resistance.

Infrared radar 3H-IR14C Double technology with safety 3m maximum height, 4 dual relay outputs certified according to EN 16005.

Automatic activation of sliding doors and pedestrian safety sensor. Small in size, with a precisely adjustable detection area.

Infrared radar Forsa New EVOLUS/NEPTIS Dual technology with sensitivity adjustment.

KIT Pair of aluminium posts with photocells COMPACTA A20-180 adjustable 180o horizontally. What. The maximum range is 20 metres and they can be fed from 12 to 33 Vac or 15 to 35 Vcc.

Safety photocell FAAC XP30 Wall-mounted or recessed transmitter-receiver, to be supplied at 24 V from a distance of up to 30 metres.

The system consists of a TX module and an RX module. Used to equip sectional doors fitted with an inserted pedestrian door. What. It can be used with external magnetic or mechanical contact, or with internal magnetic contact. This allows you to know the state of the pedestrian door (open or closed).

Box button pusher with 3 buttons (Open-Close-Stop)with dimensions of 72x150x64 mm. Protected by IP65.

Parts and accessories of machinery V2 S.H.I.E.L.D.-180's outer orientation and sync.

Manufacture from materials of any heading BFT "MURA A30' anchorage for automatic locks and safety devices up to 30 metres.

Pair of adapters BFT for installing MURA cells on posts of the PHP series.

Pair of safety photocells CAME "DXR" steerable synchronized infrared beams.

Yellow flashing lamp Beninca "IRI.LAMP-Y' multi voltage of 20÷255 Vac/dc with integrated antenna.

Self-contained license plate reader for outdoor use.

The autonomous license plate recognition system (LPR) is particularly recommended for accesses which do not require a permanent connection to a PC. What. Due to its compact size and easy attachment, it fits perfectly into ramped garage entrances and with little room for passage.

It is a unit of capture composed of IP camera for outdoor use, 2 Megapixels, motorised lens and LED IR focus. What. It includes the character recognition engine (OCR) and a output relay to send an opening order to the door or barrier. What. The capture distance of the licence plate shall be between 2 and 6 m.

Pair of photocells CAME DELTA-I for insertion of 12 - 24 V AC - DC, complete with box. Range , 20 meters .

" THIS MODEL HAS BEEN REPLACED BY THE NEW PHOTOCELL FOR THE PURPOSES OF THIS REGULATION, THE FOLLOWING DEFINITIONS SHALL APPLY: FULLY COMPATIBLE "

Impulse garage light card Clemsa TG3 for old CLAS manoeuvres.

Column FAAC for photoportable cells with a height of 50 cm.

Manufacture from materials of any heading Nice "It was Photocell L" Emitter-receiver 'EPLIO' and 'EPLIOB'.

Timed garage light card Clemsa TG2 for old CLAS manoeuvres.

Surface-mounted photocells V2 DFN to embed auto-aligned and synchronized.

V2 WES Sensor is the Emisor used for radio control of safety bands, which will allow us to install the anti-crush rubber wirelessly thanks to the radio frequency transmitter-receiver.

It is necessary from the Base (Receiver) to be able to function. We have the Base + Sensor Kit.

V2 WES Sensor is the Emisor used for radio control of safety bands, which will allow us to install the anti-crush rubber wirelessly thanks to the radio frequency transmitter-receiver.

It is necessary from the Base (Receiver) to be able to function. We have the Base + Sensor Kit.

Pair of self-aligning photocells "BFT THEA A15 O.PF UNI" with integrated intermittent light, with a range of 30 meters.