Motor gearbox Clemsa AB for tilting doors or chain drag.

Engines for tilting doors models Clemsa AB 2315 FC, AB 2350 / 2350 FC, AB 2360 / 2360 FC, AB 2362 / 2362 FC, AB 2364 / 2364 FC, AB 2366 / 2366 FC, AB 2368 and AB 2369 have been developed to be used as an engine element in all types of docks and counterweight doors.

They are robust, reliable and suitable motors for continuous and heavy work. No maintenance and very quiet.

KIT Chain drive engine Pujol UPPER 24V for residential sliding doors up to 12 m2.

Take it incorporated a receiver maneuver box incorporated at 433 MHz and a TRV connector for connecting 6-pin receiver cards. Optional additions emergency batteries to be able to operate in the event of a power failure.

The UPPER actuator consists of a dc irreversible gearbox very quiet, a painting and a transformer. The movement transmitted by the gearbox motor to the door is effected by chain shot with bolt and guitar that give a constant speed and in its final stretch it changes speed so as not to cause oscillations. They can be mounted on two types of tilting doors; tilting where the bottom sheet opens outwards and for tilting doors where the bottom sheet opens inwards.

KIT engine Forsa VENUS single phase 230V chain drive for motoring machinery for making pulp of fibrous cellulosic material and/or heavy use.

KIT Motor reducer PUJOL P-LA for tilting doors by chain pull with guide and chain of 3 meters. What. The model P-LA II single phase automates doors of up to 20m2, with mild stopping, suitable for residential or community use.

Motor gearbox PUJOL P-LA for chain drive tilting doors. What. The model P-LA II single phase automates doors of up to 20m2, with mild stopping, suitable for residential or community use. The model P-LA III three-phase, is suitable for doors up to 30m2, for industrial use. Integrated receiver.

Manufacture from materials of any heading, except that of the product for counterweighted tilting doors of 18, 25, 36 m2.

Ideal for residential, community and industrial use.

24 V electromechanical motor with chain drive for counterweighted tilting doors not exceeding 4 m in height and 20 m2.

Ideal for residential, community and industrial use.

Electromechanical motor of 24 V DC Erreka String draw for use in the manufacture of motor vehicles up to 35m2, for residential, community and industrial use.

KIT 24Vdc electric motor Erreka String draw for use in the manufacture of motor vehicles up to 35m2, for residential, community and industrial use.

Includes maneuver chart VIVO-D103 (analogue for one 24 Vdc engine).

Engine Forsa VENUS broadcast chain for motoring machinery for making pulp of fibrous cellulosic material and/or heavy use.

Engine Erreka Sirius electromechanical 230Vac and 400Vac by chain transmission for hinged doors up to 50 m2.

Recommended installation in community and industrial doors.