List of products by brand CAME

CAME 001u6111ml It is a complete range of automation of the range Amico, designed to motorize residential swing doors two leaves.

This kit incorporates two electromechanical engines CAME 001a1824 24 V DC with Encoder, suitable for sheets up 1.8 meters. Its 24 V electronics offers smooth, safe and apt operation for intensive use in residential facilities.

The set includes the maneuver box CAME 002zl92, a control center for two-sheet swing doors with programming display, self-diagnosis of safety devices and connection for control and safety accessories

CAME ATI30DGF 24V It is a complete solution to automate Two-leaf beating doors In residential and community facilities.

This kit includes two engines CAME Ati30dgf, reference 801mp-0210, irreversible electromechanical engines of 24v with encoder, designed for swing doors with leaves up 3 meters.

The CAME 001g0601 It is a rectangular aluminum mast designed as an original replacement for automatic barriers CAME Gard 6000. It is a large feather, manufactured in lightweight and resistant aluminum, designed for vehicular access control facilities where you need to cover broad steps.

This mast has a total length of 6.85 meters and has a rectangular profile of 100 x 40 mm. Its white finish allows clean and professional integration into residential, community, industrial or parking facilities.

CAME 001g0461 is a package of 24 Red Bands Reflective Adhesive, designed to improve the visibility of the masts of automatic barriers CAME.

These bands allow signaling the barrier arm in a simple way, increasing its visibility during maneuver, especially in low lighting areas, community access, parking, industrial buildings or frequent vehicle traffic facilities.

CAME 801ms-0700 BKX12Agm It is an engine for sliding doors designed for residential facilities, neighborhood communities and access with an intensive use. Thanks to your engine 24 V BrushlessIt offers efficient, silent and accurate performance, with a large working capacity.

This automatism incorporates technology Adaptive Speed & Torque Technology, which allows you to intelligently manage the speed and torque of the motor during the movement of the door. In this way, a more fluid maneuver is achieved, safe and adapted to the real conditions of the installation.

The motor CAME BKX12AGM is prepared for sliding doors up 1200 kg and up 20 meters long, being a robust solution for large accesses. Incorporates electronic picture with Display graphic, Magnetic career endings, obstacle detection and integrated radio receiver.

CAME Ati50ags, reference 801mp-0180, it is an irreversible electromechanical engine of 230v Designed to automate large swing doors in residential, community and industrial facilities.

This model belongs to the new range CAME ATI and is indicated for leaves up 5 meters long, always respecting the weight limits established according to the measurement of the sheet. It is a robust and reliable solution for heavy or large swing doors.

CAME Ati30ags, reference 801mp-0170, It is an irreversible 230V electromechanical engine designed to automate residential and community-use swing doors.

This engine is indicated for leaves up 3 meters long and 400 kg of weight, offering a robust, reliable and suitable solution for installations where a safe and safe operation automatism is needed.

The new ATI range maintains the characteristic reliability of CAME, incorporating a renovated design with an aluminum body, transmission by endless screw and adjustable mechanical stroke endings in opening and closing.

Engine CAME In the case of vehicles of categories N1 and N2 with a maximum mass exceeding 2000 kg: designed to power swing doors up to 10 feet per blade.

Ideal solution for residential and community type enclosure installations.

Endless screw always protected by the dedicated cover.

Motor with articulated arm CAME "FAST 70' 230 V for residential columns. Designed to drive blades up to 2.3 meters and 200 kg in weight.

Articulated motor CAME "FAST 70' 24V for residential columns. Designed to drive blades up to 2.3 meters and 200 kg in weight.

Electromechanical engine CAME ATI A5124 24V for swing doors up to 5 metres per leaf.

Articulated motor CAME STYLO 24V for heavy use swinging chandeliers, ideal for the motorization of cantilevers with columns or wide pillars.

Range of Other engines CAME AXLE for residential or communal switchgear in 230Vac or 24Vdc version with mechanical race finishes integrated and adjustable.

Electromechanical engine CAME ATI 5000A irreversible 230Vac for cancellations up to 5 meters per leaf, with end-of-run micro-interruptors in opening and closing.

Electromechanical motor CAME Irreversible 24V ATI ATI for residential or community swing doors Up to 3 meters and up to 400 kg.

The CAME ATI A3024N It is an electromechanical 24V gearmotor designed to automate swing doors of a sheet with maximum reliability and safety. It belongs to the renowned ATI range of CAME, one of the most robust series of the market, ideal for both residential and community facilities with intensive use.

The Automation Kit CAME Ferni 230V reference 8k01mb-009 It is designed to automate swingle In residential or community facilities, offering reliable, robust and durable performance.

The system Ferni stand out for its mechanical design, especially indicated for doors with big pillars or with a considerable distance between the axis of the hinge and the inner edge of the pillar. Its engine 230v It provides constant force and adequate performance for frequent uses.

Engine CAME BKV 36Vdc for heavy sliding doors of 1,500/2,000/2,500 KG with heavy use.

KIT engine CAME BXL04AGS at 24V for sliding doors up to 400KG and length of 10m thought for cancellations for residential use.

Motor head CAME VER10PLUS from 1000N to 24V with electronics for sectional doors up to 18m2.

CAME F4000 is a Wildlife type 24V DC type with encoder, designed to automate Pedestrian gates of up to 2 meters and 300 kg per leaf. Thanks to its continuous current technology and its advanced electronics, it is ideal for installations of intensive use In communities, residential accesses and professional environments.

CAME Fluo-sw is a Automatic pedestrian swing motor technology Brushless 36Vdc, designed for interior access of intensive use as Lobbies, Offices, Public Buildings, Clinics, Shops and Communities. It is a reversible automatism of extremely silent operation, ideal for installations where acoustic comfort and reliability are priority.

Maneuvering frame CAME ZN6 (3199ZN6) 24V for motor sliding bXL series.

Table of manoeuvres CAME ZL55 for use in the manufacture of motor vehicles, used in roof actuators of the VER series (V600 and V700). Incorporates connector to add additionally a radio frequency receiver model AF43S (not included).

" The ZL55 plate is decatalogada, it is recommended to acquire the head of the VER10PLUS which can be adapted to the guide of a VER600/VER700. "

Electronic plate CAME 3199ZLJ14 for controlling 24Vdc actuators compatible with the AXO, FROG, FERNI, FAST engines.

Electronic plate CAME Z3P for use in the manufacture of motor vehicles [1] regulation of deceleration speed. What. It doesn't incorporate a receiver.

Electronic plate CAME & MOTOSTAR XS100.

Electronic Plaque CAME 3199ZL92, designed to deliver maximum performance and engine compatibility CAME ATI, AXO and KRONO of 24V. Ideal for automatic door management smoothies, this electronic card guarantees precise control, safety and durability in each opening and closing.

Electronic plate CAME 24V ZL39B for use as spare parts in Barreras GT3750 and GARD4.

The electronic plate CAME ZN8 (88001-0186) It is an original replacement designed to replace the control plant in sliding automation CAME of the BKV series.

This plate allows you to recover the correct operation of the motor when the original electronics presents faults, maneuver failures or control problems.

Table of manoeuvres CAME 2ZE5 for tilting engine E456.

CAME Zlx24sa It is a multifunction maneuver chart designed for automatisms of two-leaf swing doors with engines 24v. Incorporates feeding 230V AC, Programming and Signaling Graph Display, Self-diagnosis of Security Devices and Advanced Speed Control and Pair Control Technology.

Table of manoeuvres CAME 801QA-0050 for one or two 24 V electromechanical vibrating motors.

The plant is powered at 230Vac and has a programming and indication display, self-diagnosis of the safety devices, Adaptive Speed & Torque Technology,

Table of manoeuvres CAME ZL22N for a parking barrier 24VDC, expandable to up to 4 barriers using 3 LM22N cards (not included).

CAME Zlx230p It is a state-of-the-art multifunction electronic power plant designed for automations of swing doors of 230v AC of one or two leaves. This new digital maneuvering box replaces previous models such as CAME Za3p, incorporating advanced programming features, integrated digital display, electronic power control and compatibility with CXN bus accessories.

Thanks to its modern electronics, the ZLX230P central allows an accurate configuration of times, decelerations, automatic closures and security devices, offering a safer, professional and easy-to-configure installation.

CAME RSDN01 is a manual unlocking device by cable (Cordino) designed specifically for sectional or swinged garage engines.

Its main function is to allow manual opening of the door from the interior of the garage in emergency situations, such as a power outage or a failure in the automatic system.

Motor kit CAME A5000A electromechanical 230V for one-bladed swinging blades up to 5 m, with a maximum weight of 400 kg.

Receptor CAME RKLT-W50 for mechanical tubular motors up to 50 Nm and 500 W.

The Vivaldi Timer TX5 CAME It is a remote control with programmable timer Of 5 channels that serves to automate radio motors according to schedules.

This device allows a motor to move without the user press the knob.

Electronic plate CAME ZL56 for 24 V V900E sectional motor, ideal for use as a spare or replacement.

Replacement plate CAME THE ZBK.

Electronic plate CAME ZN7 for the 24V BXV series.

Control panel CAME Z3P for use in the manufacture of motor vehicles [1] regulation of deceleration speed. What. It doesn't incorporate a receiver.

Control panel CAME ZL OF 24V with a graphic display for swinging candles.

Control panel CAME ZL65 24V for one- or two-bladed swivels, with programming display, built-in radio decoding and self-diagnosis of security devices.

Engine CAME BY-3500T for industrial sliding doors up to 3500 kg and 17m in length. Power supply 230 - 400 Vac three-phase, including electronic card and mechanical end-runners

Mechanical tubular motor for household blinds, blinds and screens of 36 to 92 kg.

The operator is powered at 230Vac and has a a diameter of 45 mm with the possibility of use in both round and octagonal 50 mm and 60 mm tubes.It has a mechanical manual end run with progressive screw adjustment.