Kit CAME 001U6111ML AMICO 24V for 2-sheet swing doors up to 1.8 m

CAME 001u6111ml it is a complete range of automation of the range AMICO, designed to motorize residential swing doors two leaves.

This kit incorporates two electromechanical engines CAME 001a1824 24 V DC with Encoder, suitable for sheets up 1.8 meters. Its 24 V electronics offers smooth, safe and apt operation for intensive use in residential facilities.

The set includes the maneuver box CAME 002zl92, a control center for two-sheet beating doors with programming display, self-diagnosis of safety devices and connection for control and safety accessories.

Main features

• Full kit for 2-leaf swing door, Ideal for residential facilities.
• Engines CAME AMICO 24V with encoder, for precise movement control.
• Compatible with leaves up to 1.8 m, depending on the installation conditions.
• 24 V DC operation, suitable for intensive use and frequent maneuvers.
• Integrated and adjustable mechanical career end.
• Unlocking system with trilobulated key, useful in case of lack of current or maintenance.
• ZL92 maneuver box included, with functions and self-diagnosis of assurance.
• Includes safety and signage accessories, like photocells and LED flashing lamp.
• Kit prepared for radio frequency, with plug-in receiver and transmitters included.

Kit content

Technical characteristics of the engine CAME Amico 001a1824

Technical characteristics of the picture CAME 002zl92

Engine measurements CAME AMICO

Recommended use

The kit CAME 001U6111ML AMICO 24V it is recommended to automate two-leaf residential swing doors, especially in private homes, small communities or accesses where comfortable, safe and reliable operation is required.

Thanks to its 24 V engines with Encoder and Table ZL92, it allows precise management of the maneuver, regulation of parameters and connection of safety accessories such as photocells, flashing lamp and radio emitters.

Installation recommendations

• Check that the door leaves move gently manually before installing the automation.
• Verify that the measurements, weight of the sheet and installation geometry are compatible with the AMICO motor 001A1824.
• Install the security photocells included to protect the zone.
• Perform the programming of the ZL92 box following the manufacturer's technical manual.
• In doors with wind, electric locks or leaves very closed, check if additional accessories are necessary.