Engine Nice TEN electromechanical 24Vdc for overflowing and non-overflowing tilt doors

Motor reducer for doors up to 9m2 and 2,6m high (up to 16 m2 and 2,6m high with the use of 2 motors).

Three versions, standard and powered:

• with integrated central, force regulator and absolute binding (TN2010L);

• with built-in central and receiver and electromechanical career end (TN2030L);

• without central (TN2020L).

KIT 24 V electromechanical motor Beninca MARK for built-in residential doors up to 8m2.

The operator has built-in central, receiver and encoder.

Ditec BOX3EH 24V electromechanical motor for residential swing doors up to 7m2, with e1HBOX manoeuvre chart in addition, it is important to ensure that the system is fully functional.

Motor kit Erreka Electromechanical ZEUS with saxophone hardware for tilting doors up to 9m2 residential use with 230-Vac lock and electromechanical end run.

KIT Chain drive engine Pujol UPPER 24V for residential sliding doors up to 12 m2.

Take it incorporated a receiver maneuver box incorporated at 433 MHz and a TRV connector for connecting 6-pin receiver cards. Optional additions emergency batteries to be able to operate in the event of a power failure.

The UPPER actuator consists of a dc irreversible gearbox very quiet, a painting and a transformer. The movement transmitted by the gearbox motor to the door is effected by chain shot with bolt and guitar that give a constant speed and in its final stretch it changes speed so as not to cause oscillations. They can be mounted on two types of tilting doors; tilting where the bottom sheet opens outwards and for tilting doors where the bottom sheet opens inwards.

Motor DMIL RAYO 1 electro-mechanical 230V with running end and encoder, for residential swing doors up to 9m2, the manoeuvre chart (DEVELOPMENT) built-in analogue and emitter compatible receiver Forsa 868 MHz.

The RAYO 1 EVO engine can be installed in 1 or 2 hinged doors.

Motor DMIL RAYO 1 electromechanical 230V for residential revolving doors up to 9m2, the manoeuvre chart (DEVELOPMENT) built-in analogue and emitter compatible receiver Forsa 868 MHz.

Electromechanical engine Pujol P-504 of 24 V for residential sliding doors up to 8 m2. Two versions, one with built-in frame and one without built-in frame.

KIT engine Forsa VENUS single phase 230V chain drive for motoring machinery for making pulp of fibrous cellulosic material and/or heavy use.

Electromechanical motor BENINCA AU96 for residential use up to 12m2.

Electromechanical engine DEA "LIVI 902 SR' 230V for semi-intensive residential tilting doors up to 9 m2 with built-in analogue box-receiver.

The engine incorporates mechanical opening-closing stroke ends for more precise adjustment.

KIT Motor reducer PUJOL P-LA for tilting doors by chain pull with guide and chain of 3 meters. What. The model P-LA II single phase automates doors of up to 20m2, with mild stopping, suitable for residential or community use.

Motor gearbox PUJOL P-LA for chain drive tilting doors. What. The model P-LA II single phase automates doors of up to 20m2, with mild stopping, suitable for residential or community use. The model P-LA III three-phase, is suitable for doors up to 30m2, for industrial use. Integrated receiver.

Hydraulic motor HYDOM MINIMAX version INTENSIVE for two-bladed swing doors of large dimensions (maximum 14m2). Allows manual opening and closing in the event of a power failure.

Maintenance on this engine is practically zero.

Non-reversible electromechanical motor CAME E456 with embedded ZE5 box and encoder for residential sliding doors up to 9 m2.

The single phase electromechanical actuator at 230 V has a lock and encoder control with a power of 200 W and a torque of 420 Nm.

Motor electromecánico irreversible CAME E456 con encoder sin cuadro incorporado para puertas basculantes residenciales de hasta 9m².

El actuador electromecánico monofásico a 230V cuenta con bloqueo y control por encoder con una potencia de 200 W y un par de 420 Nm.

KIT Electromechanical engine Pujol 24V P-504 with integrated manoeuvring gear for residential sliding doors up to 8 m2.

Motor gearbox DEA LIVI 550 PL designed to power book doors very heavy industrial type.

Engine Clemsa "AB10BC' electromechanical 230V for residential counterweighted tilting doors up to 10m2.

The actuator has the manoeuvre chart CLAS107 incorporated, irreversible locking system with mechanical locking so no locks are required. The manual interior unlocking allows us to actuate the door manually in case of lack of electric current.

Electromechanical engine FAAC 550 for hinged doors up to 12 m2 with the possibility of using a second 'slave' engine.

Engine Beninca Electromechanical ZED version 230V or 24V for counterweighted residential swing doors up to 12,5m2 with built-in central and encoder.

Irreversible electromechanical gear motor for residential counterbalance swing doors. Available in 230Vac and 24Vdc versions with or without mains. Courtesy light, race finishes and built-in control buttons.

Hydraulic motor 230 V FAAC 593 for sliding doors up to 3500 mm wide and 2700 mm high.

Electromechanical engine EMFA ROT MEC at 230V for residential tilting doors up to 8m2.

Self-locking mechanism with built-in box-receiver 433 MHz to drive 1 or 2 sheet counterweighted tilting doors.

Electromechanical engine EMFA ROT MEC at 230V for residential tilting doors up to 8m2.

Self-locking mechanism with built-in box-receiver 433 MHz to drive 1 or 2 sheet counterweighted tilting doors.

Oil engine FAAC 580 230V heavy-duty for counterweighted sliding doors up to 15m2.

Manufacture from materials of any heading, except that of the product for counterweighted tilting doors of 18, 25, 36 m2.

Ideal for residential, community and industrial use.

24 V electromechanical motor with chain drive for counterweighted tilting doors not exceeding 4 m in height and 20 m2.

Ideal for residential, community and industrial use.

Hydraulic motor BFT BERMA intensive use at 230V indicated for tilting doors up to 9m2. What. Manufactured to withstand the harshest conditions of use, it combines strength and operator reliability BFT. 

Hydraulic motor Aprimatic LEVA50 intensive use for use in the manufacture of motor vehicles up to 10m2 and MAXILEVA50 for doors up to 16m2.

Hydraulic operator for one- or two-bladed counterweighted swing doors. Torque control valves incorporated. Hydraulic deceleration at the end of the journey. Intensive use. Hollow shaft.

Hydraulic motor Aprimatic LEVA50 intensive use for use in the manufacture of motor vehicles up to 10m2 and MAXILEVA50 for doors up to 16m2.

Hydraulic operator for one- or two-bladed counterweighted swing doors. Torque control valves incorporated. Hydraulic deceleration at the end of the journey. Intensive use. Hollow shaft.

Hydraulic motor Aprimatic LEVA50 intensive use for use in the manufacture of motor vehicles up to 10m2 and MAXILEVA50 for doors up to 16m2.

Hydraulic operator for one- or two-bladed counterweighted swing doors. Torque control valves incorporated. Hydraulic deceleration at the end of the journey. Intensive use. Hollow shaft.

Motor kit Aprimatic Electrical connections residential tilting doors of up to 10 m2.

Engine Aprimatic Electrical connections residential tilting doors of up to 10 m2.

The ALZO55 engine has a built-in receiver, and 2 TX4E controls are included.

Engine Forsa Electromechanical ERG 24V for revolving doors of a thickness of residential use up to 10m2. What. With encoder and end-of-course micro-switches on opening and closing. Unlocking by lever, maneuver board, anti-crush system, courtesy light and unlocking in case of power failure.

Electric motor kit V2 OTHER for use in the manufacture of motor vehicles residential buildings up to 9 m2.

Electromechanical engine V2 OTHER for use in the manufacture of motor vehicles residential buildings up to 9 m2.

Hydraulic motor Medva HB1 for swing doors one or two-bladed counterweights with a not more than 25 m2, for residential, community or industrial use.

Engine Forsa VENUS broadcast chain for motoring machinery for making pulp of fibrous cellulosic material and/or heavy use.

KIT engines Erreka SIRIUS electromechanical 230Vac and 380Vac by chain transmission for industrial sliding doors of up to not more than 50 m2, with electromechanical race finishes.

Emfa series engines ROT COMODIN SUPER are designed to automate counterweight tilting doors up to 20m2 for intensive use, ideal for large communities.

Emfa series engines ROT COMODIN SUPER are designed to automate counterweight tilting doors up to 14m2 for intensive use, ideal for large communities.

Hydraulic motor for tilting doors one or two-bladed counterweights with a not more than 14 m2, for residential, community or industrial use.

Hydraulic motor for tilting doors one or two-bladed counterweights with a not more than 14 m2, for residential, community or industrial use.

KIT 24Vdc electric motor Erreka String draw for use in the manufacture of motor vehicles up to 35m2, for residential, community and industrial use.

Includes maneuver chart VIVO-D103 (analogue for one 24 Vdc engine).

Electromechanical engine DEA "LIVI 902' 230V or 24V for semi-intensive residential swing doors up to 9m2.

The 'LIVI 902' version does not incorporate a manoeuvre chart and the 'LIVI 905' version incorporates a digital manoeuvre chart. The engine travel is done by Encoder but optionally you can acquire the end of race system.

Electromechanical motor of 24 V DC Erreka String draw for use in the manufacture of motor vehicles up to 35m2, for residential, community and industrial use.

Engine Forsa Electromechanical ERG 24V for revolving doors of a thickness of residential use up to 10m2. What. With encoder and end-of-course micro-switches on opening and closing. Unlocking by lever, maneuver board, anti-crush system, courtesy light and unlocking in case of power failure.

Hydraulic motor HYDOM MINIMAX for heavy use thanks to its heat-cooled aluminium tank, for oversized two-bladed swing doors (maximum 14m2). Allows manual opening and closing in the event of a power failure.

Maintenance on this engine is practically zero.