MEDVA HB1 | Hydraulic motor for tilting doors

Hydraulic Hydraulic Motor HB1 for tilting doors of counterweights of one or two leaves with a maximum of 25m², for residential, community or industrial use.

Make soft stop adjustable in opening and closing.

The SB and SBN versions are provided with connection for hydraulic lock, collect latches at closure.

The BAC and BACN versions are provided with a universal system that allows you to select the operation (reversible, block or semi-lock) individually in each maneuver, and offer an excellent anti-wind adjustable system.

The BACN and SBN versions are provided with adjustable pressure sensor in the closure. Both apt to comply with the regulations (EN 12453).

Technical characteristics Medva HB1 (current version)

Technical characteristics Medva HB1 (ancient version <2022)

Since 2022 the Hydraulic Motors HB1 are 276W instead of 431W.

This modification allows the engine to be quieter and it is hot less, without affecting the lifting capacity.

The sum of the watts and the bars give the same NM that the ancient engine therefore the lifting capacity is practically the same.

Both the old engine and the new Dan 100 maximum pressure bar and 960nm of maximum work torque.

Measures Medva HB1

Models available

• HB1 SB: Tilting actuator 230 Reversible VAC in opening and closing.
• HB1 BAC: Tilting actuator 230 VAC with Universal BAC system.

If you need hydraulic lock for the model without blocking or to acquire the hardware, check below in the "Product accessories".

Manual

INSTRUCTION MANUAL HB1