OXYGEN EOS200EB center axle winding motor for Persiana Winding up to 180KG.

The lifting capacity is up to 180 KG and is designed for 48/60mm axles and 200/220mm pulleys.

KIT Center axle winding motor OXYGEN EOS200EB and box-receiver URANIA 433 MHz Persian Winding up to 180KG.

The lifting capacity is up to 180 KG and is designed for 48/60mm axles and 200/220mm pulleys.

Electromechanical motor 230 V ERREKA DELFOS for residential and industrial revolving doors with a lifting capacity of 170 to 360 kg, for tubes with shafts of 48 mm, 60 mm and 76 mm.

Engine axle traction Motorline ROLLING for retractable doors, robust and easy to install for retractable bars, with electro brake for shutter locking.

The engine is P-1. Designed for revolving doors up to 235 kg weight. What. Suitable for automating locks with side drive and gearbox.

Integrated electronic equipment that allows opening by key, button or remote control. Manual operation by crank.

" This product has been discontinued in 2024 and PUJOL has stopped manufacturing "

P-1 III three-phase engine from PUJOL MUNTALA. Designed for roll-over doors up to 530 kg weight. What. Suitable for automating locks with side drive and gearbox.

Integrated electronic equipment that allows opening by key, button or remote control. Manual operation by crank.

" This product has been discontinued in 2024 and PUJOL has stopped manufacturing "

Other trailers and semi-trailerswith a lifting capacity of 400N (40KG). It incorporates a receiver compatible with VARIO4 transmitters.

KIT Motor centre axle ACM of a kind used in motor vehicles, ideal for powering commercial doors or private garages.

The BiDi WiFi system allows us to make our MC200 board accessible through the Internet, to be able to open, close or stop the roller shutter via our mobile phone thanks to the My app Nice. What. Completely free, and with a quick and easy setup we can control the blind remotely, as long as we have Internet in the area where we install our automation.

PUJOL model WINNER PRO 600/200 designed to automate rolling shutters for garages and commercial premises, with lifting capacity up to 170 kg.

The WINNER PRO engine incorporates electro brakeor and is designed for 48/60mm axles and 200/220mm pulleys.

PUJOL model WINNER PRO 600/200 designed to automate rolling shutters for garages and commercial premises, with lifting capacity up to 170 kg.

The WINNER PRO engine has no electro brake and is designed for 48/60mm axles and 200/220mm pulleys.

Engine for roller shutters DEA WILL 140 E, with electrophrase and micrometric finishes.

The automation WILL 140 E is designed for roller shutters, also heavy. Its de facto traction force is up to 1400N. Easy to install, it is an effective and safe solution.

Motor center axle Erreka Emergos for roller shutters up to 160kg Lifting, ideal for motorizing commercial doors or private garages.

The electrofrain slows the shutter once it is closed being blocked and avoiding its opening manually. In the engine, the unlocker of the self-bond (black cable) is included, in order to be able to drive the blind in the case of lack of electric current in the premises or garage.

Electric brakes for rolling stock Pujol Winner with 5-meter cable.

Full race finish (box with electronics) for retractable motor Clemsa AR2581.

Engine Forsa ONLY 60 for roller shutters up to 112 kg.

As a result of the tireless search for improvements in the functional characteristics of our automatic doors and thanks to innovative construction solutions, we present a team capable of adapting to all the rolling doors with a balanced axis.

Bi-engine Forsa Unless otherwise specified in the EU-type examination certificate, the requirements of this Regulation shall not apply for roller shutters up to 153 kg.

As a result of the tireless search for improvements in the functional characteristics of our automatic doors and thanks to innovative construction solutions, we present a team capable of adapting to all the rolling doors with a balanced axis.

Poly (ethylene terephthalate), whether or not chemically defined, with the possibility of later motorization.

These pulleys are used so that the entire weight of the blind does not fall on the central axis, are responsible for distributing the weight between each of the units so that there is not too high a weight load on the shaft or on the motor (if the shutter was motorized).

Motor 1 or 2 coils Forsa Saturn for 76 mm roller shutters of a diameter and pulleys of 240 mm.

Electric brake Clemsa EF81 for rolling stock AR2581, allows us to block the blinds once closed. Emergency unlocking can be done with the handle on the mechanism.

Motor centre axle ACM K545 EF, with 1-coil electrobrake resized for 76 axle and pulley 240mm, for roller shutters up to 250 kg.

Motor centre axle ACM K535 EF, with 1 coil electrophrene removed for 60 axle and 200mm pulley, for roller shutters up to 260 kg.

PUJOL model WINNER PRO 600/200 designed to automate rolling shutters for garages and commercial premises, with lifting capacity up to 170 kg.

The WINNER PRO engine incorporates electro brakeor and is designed for 48/60mm axles and 200/220mm pulleys.

PUJOL model WINNER PRO 600/200 designed to automate rolling shutters for garages and commercial premises, with lifting capacity up to 170 kg.

The WINNER PRO engine has no electro brake and is designed for 48/60mm axles and 200/220mm pulleys.

PUJOL model WINNER PRO 600/200 designed to automate rolling shutters for garages and commercial premises, with lifting capacity up to 170 kg.

The WINNER PRO engine has no electro brake and is designed for 48/60mm axles and 200/220mm pulleys.

The actuator TRIK 24SILENCE 24 of 24Vdc has been designed to cover the market space of rolling doors made of aluminium or stainless steel slabs these doors require a quality actuator to perform silent and rapid manoeuvres with soft stops at the end of the run to avoid hitting the lock.

Electrical brakes Forsa IT'S UNIQUE.

The clutch or electrobrake allows us to lock the blind so that it cannot be manually actuated, and in case we have to unlock to open manually we have a knob that we must operate to be able to unlock or unlock.

Electric brake or complete clutch for retractable motor ACM The Titan.

PUJOL WINNER PRO 600/200 Roller door motor designed to automate roller shutters garages and commercial premises, with lifting capacity of up to 170 kg.

The WINNER PRO engine does not incorporate electrofreno and is designed for 48/60mm shafts and 200/220mm pulleys.

PUJOL WINNER PRO 600/200 Roller door motor designed to automate roller shutters garages and commercial premises, with lifting capacity of up to 170 kg.

The WINNER PRO engine incorporates electrofreno and is designed for 48/60mm shafts and 200/220mm pulleys.

PUJOL model WINNER PRO 600/200 designed to automate rolling shutters for garages and commercial premises, with lifting capacity up to 170 kg.

The WINNER PRO engine incorporates electro brakeor and is designed for 48/60mm axles and 200/220mm pulleys.

Motor centre axle ACM for use in the manufacture of products falling within heading 8528, ideal for powering commercial doors or private garages.

Do not allow the engine to lock when the door is stopped or left closed, if there is no electricity, you can climb by hand. It is recommended to use in places where there is NO alternative access to the shop/garage or an external brake unlocker cannot be installed, as when there is no electric current it can be operated manually.

Motor centre axle ACM of a kind used in motor vehicles, ideal for powering commercial doors or private garages.

The electro-brake brakes the blind once it's closed and avoiding opening it manually. The motor includes the auto brake unlock (black cable), to be able to activate the blind in case of lack of electric current in the room or garage.

For the purposes of this Regulation, the following definitions apply: compatible with all brands on the market ACM & WHISTLE.

I'm going to go with the P-1. Designed for roll-over doors up to 530 kg weight. What. Suitable for automating locks with side drive and gearbox.

Integrated electronic equipment that allows opening by key, button or remote control. Manual operation by crank.

" This product has been discontinued in 2024 and PUJOL has stopped manufacturing "

I'm going to go with the P-1. Designed for revolving doors up to 235 kg weight. What. Suitable for automating locks with side drive and gearbox.

Integrated electronic equipment that allows opening by key, button or remote control. Manual operation by crank.

Motor centre axle ACM for use in the manufacture of products falling within heading 8528, ideal for powering commercial doors or private garages.

Do not allow the engine to lock when the door is stopped or left closed, if there is no electricity, you can climb by hand. It is recommended to use in places where there is NO alternative access to the shop/garage or an external brake unlocker cannot be installed, as when there is no electric current it can be operated manually.

Other, of circular cross-section ACM for retractable doors 76/360 with electro brake. Motor for industrial spring-loaded rolling doors, axle 76 mm in diameter, lifting capacity up to 360 kg.

Other, of circular cross-section V2 AGON for revolving doors with 76 axles and up to 360 kg with electro-brake. What. Motor for spring-loaded industrial revolving doors, shaft 76 mm in diameter, lifting capacity up to 360 kg and crown 240.

It shall be capable of operating at a speed exceeding 100 km/h" designed to automate garage and commercial blinds a diameter of not more than 30 mm, and with a for use in the manufacture of motor vehicles.

The Bi-Motor has an electro-brake system to block the blind, and a knob to unplug it so that it can be opened manually in the event of a power cut. Automation is designed to work with with pulleys of 240/280 mm.

PUJOL double coil motor "WINNER PRO 1200/200" designed to automate garage and commercial blinds axle 60mm or 48mm, and with a lifting capacity up to 340 kg.

The Bi-Motor has an electro-brake system to block the blind, and a blanket to unwrap it and thus be able to open manually in case of electric current cut. Also in the box comes a 48mm axle adapter. Automation is designed to work with 200/220mm poles.

Bi-Motor (doble bobina) ACM para puertas enrollables 60/280 con electrofreno. Motor para puertas enrollables industriales compensadas por muelles, eje de 60 mm de diámetro, capacidad de elevanción de hasta 280 kg.

Other, of circular cross-section V2 AGON for revolving doors with axle 60 and up to 280 kg with electro-brake. What. Motor for spring-loaded industrial revolving doors, axle 60 mm in diameter, lifting capacity up to 280 kg and crown 200/220.

Motor centre axle ACM of a kind used in motor vehicles, ideal for powering commercial doors or private garages.

The electro-brake brakes the blind once it's closed and avoiding opening it manually. The motor includes the auto brake unlock (black cable), to be able to activate the blind in case of lack of electric current in the room or garage.

Motor centre axle ACM for use in the manufacture of products falling within heading 8528, ideal for powering commercial doors or private garages.

Do not allow the engine to lock when the door is stopped or left closed, if there is no electricity, you can climb by hand. It is recommended to use in places where there is NO alternative access to the shop/garage or an external brake unlocker cannot be installed, as when there is no electric current it can be operated manually.

Center axle coil motor Motorline model ROLLING SP with a lifting capacity of up to 160 kg with electro-brake, for a pulley of 200 mm and an axle of 60 mm.

KIT Motor coil centre axle Motorline model ROLLING SP with a lifting capacity of up to 160 kg with electro-brake, for a pulley of 200 mm and an axle of 60 mm.

Bi-motor coil centre axle of Motorline model ROLLING SP with a lifting capacity of up to 360 kg with electro-brake, for 240 mm pulley and 76 mm axle.