KIT 24 V electromechanical motor Beninca MARK for built-in residential doors up to 8m2.

The operator has built-in central, receiver and encoder.

✓ Built-in CP.MARK with built-in receiver

✓ Encoder and integrated ESA+ system

✓ Battery charger incorporated

✓ Designed to comply with European security regulations

MARK CHARACTERISTICS

• Electromechanical motor with built-in central equipped with a switching power supply of 115/230 Vac, which allows reduced consumption and a long service life of the actuator

• It has 14 integrated LED courtesium light that ensures high luminous performance also in the non-central version

• The operator is characterized by its compact dimensions (48 cm long) that allow a simplified door balance and easy and fast mounting even on articulated frame doors

• The axis of exit with square hole 20 x 20 mm and a distance between axles of only 53 mm allows perfect integration even in existing systems

• The encoder device ensures maximum security and precision in the door's motion phases

• End of race in opening and integrated control button

• STC System device that allows to control the distribution of the motor torque based on the door position, ensuring maximum safety

• Secured operation even in the absence of electricity through backup batteries

• Anti-plastering system with amperimetric detection

• Prepared for the connection of X.BE accessory for integration into KNX domotic systems and for programming using the BeUP app and the PRO.UP interface

• Manual unlock with integrated lever

• Suitable also for articulated doors thanks to the possibility of installing backwards

MARK TECHNICAL CHARACTERISTICS

• Food: 100 ÷ 250 Vac (50/60 Hz)
• Power supply: 24 Vdc
• Max Power Absorption: 3.5 ÷ 1.9 A
• Standby consumption: 0.8 W
• Par: 300 Nm
• Opening hours: 14” ÷ 17”
• Work cycle: intensive use
• Degree of protection: IP20
• Incorporated power plant: YES
• Built-in receiver: YES
• Encoding: YES
• Operating temperature: -20°C /+50°C
• Maximum door surface: 8 m2
• Weight: 6 kg

CENTRAL CARACTERISTICS CP.MARK

• Integrated LCD screen
• Built-in radio receiver 433,92 MHz 64 codes and ARC radio coding
• Removable terminal block
• Automatic, semiautomatic and man-present logic
• Entry to encoder
• Step-by-step tickets and stop
• Configurable photocell input as input for sensitive edge N.C. or 8K2
• Dose configurable inputs such as opening, closing, photocell opening and closing, photocell n closing, opening and closing of the second engine
• Entrance for final race
• Separate power output for each motor
• Departure for 24 Vdc flash lamp
• Accessories 24 Vdc Max power supply. 500 mA
• Departure (230Vac 5A max) configurable as open door indicator light, courtesy light, zone light, second radio channel, photocell test, flashing lamp, open door alarm, NC input alarm
• Built-in LED courtesy light
• Departure for complimentary second motor light
• Autoset of operating parameters
• Electronic adjustment of the pair
• Separate electronic adjustment of opening and closing speed
• Anti-plasty security with amperimetric detection and shrinkage management
• Electronic torque adjustment with automatic calculation for each point of travel (STC SYSTEM)
• Adjustable delays in opening and closing
• ESA+ integrated for energy saving
• Prepared for KNX connection via X.BE card (optional)
• Prepared for the management, configuration, diagnosis and updating of firmware through the BeUP app, through the PRO.UP accessory
• Possibility to configure parameters and command management with the Advantouch system
• Number of manoeuvres
• Access and programming password
• Notice for maintenance
• Integrated battery charger, compatible with 2 12V 1.2Ah batteries

CONTENT OF THE KIT

• 1x MARK (959002795): Electromechanical motor 24 with central CP.MARK.
• 1x MARK.P160 (962303118): 1600 mm coating or support.
• 1x MARK.D (909903037): Pair of straight arms with square shell 20x20 mm .
• 1x MARK.T180 (986803038): Pair of square tubes 20x20x1800 mm, thickness of 2.5 mm, with supports.
• 2x TO.GO2VA (9863173)RollingCode 433 MHz two channels

MEANS BENINCA MARK

MANUAL

Instruction manual Beninca MARK