PUJOL model WINNER PRO 600/200 designed to automate rolling shutters for garages and commercial premises, with lifting capacity up to 170 kg.

The WINNER PRO engine has no electro brake and is designed for 48/60mm axles and 200/220mm pulleys.

PUJOL model WINNER PRO 600/200 designed to automate rolling shutters for garages and commercial premises, with lifting capacity up to 170 kg.

The WINNER PRO engine incorporates electro brakeor and is designed for 48/60mm axles and 200/220mm pulleys.

Other trailers and semi-trailerswith a lifting capacity of 400N (40KG). It incorporates a receiver compatible with VARIO4 transmitters.

P-1 III three-phase engine from PUJOL MUNTALA. Designed for roll-over doors up to 530 kg weight. What. Suitable for automating locks with side drive and gearbox.

Integrated electronic equipment that allows opening by key, button or remote control. Manual operation by crank.

KIT Motor centre axle ACM of a kind used in motor vehicles, ideal for powering commercial doors or private garages.

The BiDi WiFi system allows us to make our MC200 board accessible through the Internet, to be able to open, close or stop the roller shutter via our mobile phone thanks to the My app Nice. What. Completely free, and with a quick and easy setup we can control the blind remotely, as long as we have Internet in the area where we install our automation.

OXYGEN EOS200EB center axle winding motor for Persiana Winding up to 180KG.

The lifting capacity is up to 180 KG and is designed for 48/60mm axles and 200/220mm pulleys.

KIT Center axle winding motor OXYGEN EOS200EB and box-receiver URANIA 433 MHz Persian Winding up to 180KG.

The lifting capacity is up to 180 KG and is designed for 48/60mm axles and 200/220mm pulleys.

The engine is P-1. Designed for revolving doors up to 235 kg weight. What. Suitable for automating locks with side drive and gearbox.

Integrated electronic equipment that allows opening by key, button or remote control. Manual operation by crank.

Engine axle traction Motorline ROLLING for retractable doors, robust and easy to install for retractable bars, with electro brake for shutter locking.

Electrical brakes Forsa IT'S UNIQUE.

The clutch or electrobrake allows us to lock the blind so that it cannot be manually actuated, and in case we have to unlock to open manually we have a knob that we must operate to be able to unlock or unlock.

Electromechanical motor 230 V ERREKA DELFOS for residential and industrial revolving doors with a lifting capacity of 170 to 360 kg, for tubes with shafts of 48 mm, 60 mm and 76 mm.

Motor centre axle Aprimatic for rolling shutters of 140 to 190 kg lift, ideal for powering commercial doors or private garages.

The actuator TRIK 24SILENCE 24 of 24Vdc has been designed to cover the market space of rolling doors made of aluminium or stainless steel slabs these doors require a quality actuator to perform silent and rapid manoeuvres with soft stops at the end of the run to avoid hitting the lock.

PUJOL model WINNER PRO 600/200 designed to automate rolling shutters for garages and commercial premises, with lifting capacity up to 170 kg.

The WINNER PRO engine has no electro brake and is designed for 48/60mm axles and 200/220mm pulleys.

PUJOL model WINNER PRO 600/200 designed to automate rolling shutters for garages and commercial premises, with lifting capacity up to 170 kg.

The WINNER PRO engine has no electro brake and is designed for 48/60mm axles and 200/220mm pulleys.

PUJOL model WINNER PRO 600/200 designed to automate rolling shutters for garages and commercial premises, with lifting capacity up to 170 kg.

The WINNER PRO engine incorporates electro brakeor and is designed for 48/60mm axles and 200/220mm pulleys.

Motor centre axle ACM K535 EF, with 1-coil electrobrake resized for axle 60 and pulley 240mm, for roller shutters up to 260 kg.

Motor centre axle ACM K545 EF, with 1-coil electrobrake resized for 76 axle and pulley 240mm, for roller shutters up to 250 kg.

Full race finish (box with electronics) for retractable motor Clemsa AR2581.

Electric brakes for rolling stock Pujol Winner with 5-meter cable.

Electric brake Clemsa EF81 for rolling stock AR2581, allows us to block the blinds once closed. Emergency unlocking can be done with the handle on the mechanism.

Motor 1 or 2 coils Forsa Saturn for 76 mm roller shutters of a diameter and pulleys of 240 mm.

Poly (ethylene terephthalate), whether or not chemically defined, with the possibility of later motorization.

These pulleys are used so that the entire weight of the blind does not fall on the central axis, are responsible for distributing the weight between each of the units so that there is not too high a weight load on the shaft or on the motor (if the shutter was motorized).

Bi-engine Forsa Unless otherwise specified in the EU-type examination certificate, the requirements of this Regulation shall not apply for roller shutters up to 153 kg.

As a result of the tireless search for improvements in the functional characteristics of our automatic doors and thanks to innovative construction solutions, we present a team capable of adapting to all the rolling doors with a balanced axis.

Engine Forsa ONLY 60 for roller shutters up to 112 kg.

As a result of the tireless search for improvements in the functional characteristics of our automatic doors and thanks to innovative construction solutions, we present a team capable of adapting to all the rolling doors with a balanced axis.

Race finishes ACM Titanium centrifugal coil engines.

Electric brake or complete clutch for retractable motor ACM The Titan.

Bi-motor coil centre axle of Motorline model ROLLING SP with a lifting capacity of up to 360 kg with electro-brake, for 240 mm pulley and 76 mm axle.

KIT Motor coil centre axle Motorline model ROLLING SP with a lifting capacity of up to 160 kg with electro-brake, for a pulley of 200 mm and an axle of 60 mm.

Center axle coil motor Motorline model ROLLING SP with a lifting capacity of up to 160 kg with electro-brake, for a pulley of 200 mm and an axle of 60 mm.

Other, of circular cross-section V2 AGON for revolving doors with 76 axles and up to 360 kg with electro-brake. What. Motor for spring-loaded industrial revolving doors, shaft 76 mm in diameter, lifting capacity up to 360 kg and crown 240.

Other, of circular cross-section V2 AGON for revolving doors with axle 60 and up to 280 kg with electro-brake. What. Motor for spring-loaded industrial revolving doors, axle 60 mm in diameter, lifting capacity up to 280 kg and crown 200/220.

I'm going to go with the P-1. Designed for roll-over doors up to 530 kg weight. What. Suitable for automating locks with side drive and gearbox.

Integrated electronic equipment that allows opening by key, button or remote control. Manual operation by crank.

Motor centre axle ACM for use in the manufacture of products falling within heading 8528, ideal for powering commercial doors or private garages.

Do not allow the engine to lock when the door is stopped or left closed, if there is no electricity, you can climb by hand. It is recommended to use in places where there is NO alternative access to the shop/garage or an external brake unlocker cannot be installed, as when there is no electric current it can be operated manually.

Motor centre axle ACM of a kind used in motor vehicles, ideal for powering commercial doors or private garages.

The electro-brake brakes the blind once it's closed and avoiding opening it manually. The motor includes the auto brake unlock (black cable), to be able to activate the blind in case of lack of electric current in the room or garage.

I'm going to go with the P-1. Designed for revolving doors up to 235 kg weight. What. Suitable for automating locks with side drive and gearbox.

Integrated electronic equipment that allows opening by key, button or remote control. Manual operation by crank.

PUJOL model WINNER PRO 600/200 designed to automate rolling shutters for garages and commercial premises, with lifting capacity up to 170 kg.

The WINNER PRO engine has no electro brake and is designed for 48/60mm axles and 200/220mm pulleys.

Motor centre axle ACM for use in the manufacture of products falling within heading 8528, ideal for powering commercial doors or private garages.

Do not allow the engine to lock when the door is stopped or left closed, if there is no electricity, you can climb by hand. It is recommended to use in places where there is NO alternative access to the shop/garage or an external brake unlocker cannot be installed, as when there is no electric current it can be operated manually.

PUJOL model WINNER PRO 600/200 designed to automate rolling shutters for garages and commercial premises, with lifting capacity up to 170 kg.

The WINNER PRO engine incorporates electro brakeor and is designed for 48/60mm axles and 200/220mm pulleys.

Motor centre axle ACM for use in the manufacture of products falling within heading 8528, ideal for powering commercial doors or private garages.

Do not allow the engine to lock when the door is stopped or left closed, if there is no electricity, you can climb by hand. It is recommended to use in places where there is NO alternative access to the shop/garage or an external brake unlocker cannot be installed, as when there is no electric current it can be operated manually.

Motor centre axle ACM of a kind used in motor vehicles, ideal for powering commercial doors or private garages.

The electro-brake brakes the blind once it's closed and avoiding opening it manually. The motor includes the auto brake unlock (black cable), to be able to activate the blind in case of lack of electric current in the room or garage.

PUJOL model WINNER PRO 600/200 designed to automate rolling shutters for garages and commercial premises, with lifting capacity up to 170 kg.

The WINNER PRO engine incorporates electro brakeor and is designed for 48/60mm axles and 200/220mm pulleys.

Other, of circular cross-section ACM for retractable doors 76/360 with electro brake. Motor for industrial spring-loaded rolling doors, axle 76 mm in diameter, lifting capacity up to 360 kg.

Other, of circular cross-section Clemsa "AR2581F' with electro-brake for roller shutters up to 170 kg. What. Designed to power center-axle winding closures of commercial premises.

The manoeuvre chart of this KIT is model CLAS 1 with receiver card RNE248 at 433 MHz.

Bi-Motor (doble bobina) ACM para puertas enrollables 60/280 con electrofreno. Motor para puertas enrollables industriales compensadas por muelles, eje de 60 mm de diámetro, capacidad de elevanción de hasta 280 kg.

Other, of circular cross-section Clemsa "AR2581F' with electro-brake for roller shutters up to 170 kg. What. Designed to power center-axle winding closures of commercial premises.

The manoeuvre chart of this KIT is model CR81 at 433 MHz.

Motor of Clemsa model AR 2581 with/without electro-brake for roller shutters up to 170 kg.

Motor de doble bobina para puerta enrollable PUJOL "WINNER PRO 1200/200" pensado para automatizar persianas enrollables de garajes y locales comerciales compatible con eje de 60mm o 48mm, y con una capacidad de elevación de hasta 340 kg.

El Bi-Motor cuenta con sistema de electrofreno para bloquear la persiana, y una maneta para desembragarlo y así poder abrir manualmente en caso de corte de la corriente eléctrica. Además en la caja viene un adaptador para eje de 48mm. El automatismo está pensado para funcionar con poleas de 200/220mm.