List of products by brand Aprimatic

Self-contained license plate reader for outdoor use.

The autonomous license plate recognition system (LPR) is particularly recommended for accesses which do not require a permanent connection to a PC. What. Due to its compact size and easy attachment, it fits perfectly into ramped garage entrances and with little room for passage.

It is a unit of capture composed of IP camera for outdoor use, 2 Megapixels, motorised lens and LED IR focus. What. It includes the character recognition engine (OCR) and a output relay to send an opening order to the door or barrier. What. The capture distance of the licence plate shall be between 2 and 6 m.

Security radar Aprimatic DT90C for automatic glass doors with infrared detection and bidirectional microwave.

Electromechanical barrier Aprimatic PARK PLUS at 24V very intensive use with mast from 3 to 8 meters with built-in maneuver box.

Electromechanical barrier Aprimatic PARK at 24V intensive use with mast from 3 to 6 meters with built-in maneuver box.

The automatic PARK barrier is designed for the control of vehicles in confined spaces with heavy traffic such as a residential area or residential areas. Automatic barrier exterior steel with cataphoresis treatment painted polyester. 24 V motor with encoder and programmable control panel with end-of-course deceleration functions and obstacle detection system. the automatic barrier incorporates external unlocking for manual manoeuvring in case of power failure. Optionally an oval arm with LED lighting up to 5 m can be installed.

Other, of circular cross-section Aprimatic RX2MR, compatible with most maneuver frames with receiver connection and compatible with the former RX1 receptor.

Quartz transmitter Aprimatic tG2C model of two channels, fixed code, quartz to frecuencua 27.195 MHz. Programming by placing dip-switch.

Other, of circular cross-section Aprimatic RX1E 433 MHz for manoeuvre frames of the Apricode series with a capacity of 1000 codes.

It has four programming modes: Autocoding, Common Code, Urbanization Mode and Access Control.

Rolling code can be enabled by a jumper.

Issuer Aprimatic model TX4E with RollingCode coding system. 4 channel remote control at 433.92 MHz.

Kit Leds Barrier Aprimatic PATROL PLUS for the oval measuring arm 76x49 mm .

" This product is discontinued by the manufacturer Aprimatic "

Analogue manoeuvring table for 1 or 2 sheet swing doors with built-in receiver. What. Includes electronic deceleration at end of run. Motor thrust force control by torque limitation.

Table of manoeuvres Aprimatic A40DG designed to control one or two motors at 230V up to 800W per motor.

Table of manoeuvres Aprimatic SC230 analogue for electro-mechanical operators of 230Vac with running ends. What. Anti-crush function by torque limitation.

Table of manoeuvres Aprimatic A80DG for electro-mechanical sliding door operators at 230 Vac with running ends. What. Self-learning and parameter programming by LCD screen.

Table of manoeuvres Aprimatic BT40 DG for 2 electromechanical operators 24Vdc with or without running ends. What. Programming of parameters by LDC screen.

Table of manoeuvres Aprimatic A40BS for 1 or 2 36V Brushless hydraulic operators with absolute position encoder.

The vehicle shall be equipped with an automatic transmissionfor the operation of industrial sectional doors, sliding or tilting doors with 230 V Triphase motors.

Safety photocell Aprimatic ER10 Outdoor transmitter-receiver modulated light with two relays.

The outdoor photocell ER 10 is compact and safe, reliable over time; it consists of a modulated infrared light receiver and transmitter.

Hydraulic oil Aprimatic AF32 (APRIMOIL) of 1 litre for reciprocating or hydraulic motors.

Operator Aprimatic Electromechanical MATICBOX at 24 Vcc for residential use in spring doors and sectional doors, chain and belt drive. What. Equipped with an automatic path recognition system, deceleration in opening and closing phases and anti-crush sensitivity.

High speed motor Aprimatic "FAST WAVE 424" 24V for sliding doors up to 400 kg and 320 mm/s for residential use.

Incorporates the manoeuvre chart, with anti-crushing system to reverse the manoeuvre in case of detection of obstacles. What. Custom key unlock in case of power failure.

Engine Aprimatic Wave 724 to 24V for sliding doors up to 700 kg. What. Ideal for residential doors of intensive use.

Operator at 24 Vcc for sliding doors up to 700 kg. Intensive use. It incorporates the maneuver board, with anti-crush system to reverse the maneuver in case of detection of obstacles. Personalized lock unlock in case of power failure.

Locker unlocked Aprimatic Armored outer chrome insertion with button.

• fittings for prestige installations

• interchangeable cylinder manufactured in Italy

• standard electrical connection with three-way buttonhole

• double unlocking of the brake from inside/outside with a single brake cable

KIT engine Aprimatic XT2500L electro-mechanical 230 Vac for hinged doors up to 4 meters per leaf.

Engine Aprimatic SR350 electromechanical for use in the manufacture of motor vehicles [1] residential overhangs up to 3,5 metres by leaf and 300 kg weight.

The electromechanical operator is sturdy and is built on an injected aluminium chassis and coated with polyester paint. Available in reversible and irreversible format.

KIT engine Aprimatic XT2500 electro-mechanical 230 Vac for hinged doors up to 10 feet per leaf.

Engine Aprimatic SR350 electromechanical for use in the manufacture of motor vehicles residential overhangs up to 3,5 metres by leaf and 300 kg weight.

The electromechanical operator is sturdy and is built on an injected aluminium chassis and coated with polyester paint.

Engine Aprimatic SR350 electromechanical for use in the manufacture of motor vehicles [1] residential overhangs up to 3,5 metres by leaf and 300 kg weight.

The electromechanical operator is sturdy and is built on an injected aluminium chassis and coated with polyester paint.

Engine Aprimatic XT2500 electro-mechanical 230 Vac for hinged doors up to 10 feet per leaf (XT2500) and up to 4 metres per leaf (XT2500L).

KIT engine Aprimatic XT2500 electro-mechanical 230 Vac for hinged doors up to 10 feet per leaf.

Engine Aprimatic Electrical connections residential tilting doors of up to 10 m2.

The ALZO55 engine has a built-in receiver, and 2 TX4E controls are included.

Motor kit Aprimatic Electrical connections residential tilting doors of up to 10 m2.

Hydraulic motor Aprimatic model FORTY 270 for one- or two-bladed heavy-duty canisters, in the 270mm and 390mm version.

Hydraulic motor Aprimatic model FORTY 270 for one- or two-bladed heavy-duty canisters, in the 270mm and 390mm version.

Hydraulic motor Aprimatic LEVA50 intensive use for use in the manufacture of motor vehicles up to 10m2 and MAXILEVA50 for doors up to 16m2.

Hydraulic operator for one- or two-bladed counterweighted swing doors. Torque control valves incorporated. Hydraulic deceleration at the end of the journey. Intensive use. Hollow shaft.

Engine Aprimatic R223 Irreversible electromechanical 230 Vac for swing doors up to 2.5 m and residential use.

Built on a sturdy injected and anodized aluminum chassis for outdoor use.

Hydraulic motor Aprimatic LEVA50 intensive use for use in the manufacture of motor vehicles up to 10m2 and MAXILEVA50 for doors up to 16m2.

Hydraulic operator for one- or two-bladed counterweighted swing doors. Torque control valves incorporated. Hydraulic deceleration at the end of the journey. Intensive use. Hollow shaft.

Engine Aprimatic Wave 1024 to 24V for sliding doors up to 1000 kg.Ideal for residential doors of intensive use.

Operator at 24 Vcc for sliding door up to 1000 kg. Intensive use. It incorporates the maneuver board, with anti-crush system to reverse the maneuver in case of detection of obstacles. Personalized lock unlock in case of power failure.

Hydraulic motor Aprimatic LEVA50 intensive use for use in the manufacture of motor vehicles up to 10m2 and MAXILEVA50 for doors up to 16m2.

Hydraulic operator for one- or two-bladed counterweighted swing doors. Torque control valves incorporated. Hydraulic deceleration at the end of the journey. Intensive use. Hollow shaft.

Hydraulic motor Aprimatic FORTY 65 SP heavy use for hinged doors up to 6 metres in height. With installation of pump off the blade to prevent transmission of vibration the structure of the building.

Built-in anti-crush safety valves. Speed deceleration at the end of the route. 20mm diameter barrel and 270mm useful stroke.

KIT Hydraulic engine Aprimatic FORTY 65 SP heavy use for hinged doors up to 6 metres in height. With installation of pump off the blade to prevent transmission of vibration the structure of the building.

Built-in anti-crush safety valves. Speed deceleration at the end of the route. 20mm diameter barrel and 270mm useful stroke.

Operator Aprimatic REDMATIC BOX 24V for residential sectional doors of 600/800/1200/1800 N.Equipped with an automatic path recognition system, deceleration in opening and closing phases and anti-crush sensitivity.

Motor centre axle Aprimatic for rolling shutters of 140 to 190 kg lift, ideal for powering commercial doors or private garages.

KIT engines Aprimatic R223 Irreversible electromechanical of 230 Vac for swing doors up to 2.5 metres per sheet, ideal for residential use.

Built on a sturdy injected and anodized aluminum chassis for outdoor use.

Hydraulic motor Aprimatic For the purposes of this Regulation, the following definitions shall apply:,ideal for powering community use doors with high vehicle traffic.

The hydraulic operator FORTY40BS for one- or two-bladed designed for continuous use with 100% working factor. What. It uses a 36 Vcc gearbox motor with «brushless» technology. It has an absolute linear encoder that allows an exact control of the position and speed of the door.

KIT Hydraulic engine Aprimatic For the purposes of this Regulation, the following definitions shall apply:, ideal for powering community use doors with high vehicle traffic.

The hydraulic operator FORTY40BS for one- or two-bladed designed for continuous use with 100% working factor. What. It uses a 36 Vcc gearbox motor with «brushless» technology. It has an absolute linear encoder that allows an exact control of the position and speed of the door.

Sliding engine Aprimatic "WAVE 836 BS" Brushless 36V for doors up to 800 KG with continuous use.

ONDA 836 BS is an operator for sliding canopies up to 800 kg in continuous use. It has a 36 Vcc motor and «brushless» technology which, together with an oil-washed reducer, allows continuous use of the door. It incorporates dual adjustable control over engine force by mechanical and electronic clutch. Precise movement under the supervision of a door position and speed recognition encoder.

Motor for sectional doors Aprimatic BLACK BOX 24V for semi intensive use.

» BLACK BOX 600 N for sectional doors up to 10m2

» BLACK BOX 800 N for sectional doors up to 12m2

» BLACK BOX 1200 N for sectional doors up to 16m2

Adjustable forks for automatic barriers Aprimatic.