List of products by brand BFT

Electronic plate BFT HAMAL for sliding engine DEIMOS A400.

The manoeuvring box has trimmer and DIP switches, its connecting rods are removable and bear a coloured standard. It incorporates a 433 MHz receiver, anti-crush safety systems based on the D-Track system and deceleration in the opening and closing phases.

Pair of self-aligning photocells BFT GIVE ME A 15, 24Vac power and 30m range.

Aluminium column pair BFT for photocells of the THEA, DESME and COMPACTA series. Height 522 mm

For use in the manufacture of motor vehicles, designed to offer a high level of flexibility of installation thanks to their compact size, the possibility of adjusting the head 90° horizontally, left and right (180° total), and a wide input range of power supply 12-33 V AC and 15-35 V DC. What. Nominal range of 20 meters.

Parts and accessories BFT AKTA to use the aluminum columns.

Flashing light without built-in antenna for motors with 24 V power supply.

The flashing signal light for automatic cancellation, RADIUS LED of BFT, 24 V without built-in receiving antenna. Thanks to LED technology, energy consumption is reduced by approximately 80% compared to models with traditional incandescent bulbs, while the product life is extended. Possibility to install on a surface (such as a pillar or column) or on the wall using the special accessory. Grade of protection IP44.

KIT Pair of aluminium posts with photocells COMPACTA A20-180 adjustable 180o horizontally. What. The maximum range is 20 metres and they can be fed from 12 to 33 Vac or 15 to 35 Vcc.

Manufacture from materials of any heading BFT "MURA A30' anchorage for automatic locks and safety devices up to 30 metres.

Pair of adapters BFT for installing MURA cells on posts of the PHP series.

Pair of self-aligning photocells "BFT THEA A15 O.PF UNI" with integrated intermittent light, with a range of 30 meters.

Pair of photocells BFT AKTA A30 orientables 180o horizontal and 20o vertical. 24V powered with a maximum range of 30 meters.

AKTA A30 security photocells are ideal for automatic shutdowns and safety devices.

Operator BFT "TIZIANO B GDA 260 S01' for sectional garage doors with a tensile strength of 60 kg and heavy duty. What. Area of the door 10 m2. Opening speed 6.6 m/min. D-Track

With a thickness of only 13 cm, TIZIANO is one of the most compact operators on the market, so it can be installed in any architectural context.

Thanks to the radio receiver built into the control centre, the TIZIANO can memorize the code of 10 remote controls from the MITTO or KLEIO series and/or wireless control systems such as, for example, MIMEPAD or T-BOX.

Operator BFT "TIZIANO B GDA 260 S01' for sectional garage doors with a tensile strength of 60 kg and heavy duty. What. Area of the door 10 m2. Opening speed 6.6 m/min. D-Track

NotesThe following: this product consists only of the engine head, intended for replacement. If you need all the material to drive a section door, we have the FRENCH KIT.

Electromechanical engine BFT "ATHOS AC A" Irreversible 230V for residential swivels up to 700 kg in weight and 4 metres in length.

24 V hydraulic motor BFT "FAST ULTRA BT A' for hinged doors of heavy use up to 5 metres in length. It incorporates a selectable locking system and magnetic run ends.

Full range of highly intensive use oleodynamic pistons, suitable for any type of application: residential, industrial or community.

Articulated motor BFT "VIRGO SMART BT A' residential hinged doors up to 2 metres or up to 200 kg. The main actuator incorporates a manoeuvre box with a 433 MHz receiver.

Residential electromechanical articulated-arm operator for swinging cantilever blades up to 2 m and up to 200 kg. Ideal for any installation requirement, allows you to easily solve problems related to large pillars thanks to the lever system. What. Control unit, control switch and mechanical stop blocks integrated in the operator.

Electromechanical axle traction operator BFT "PEGASO' for semi-intensive or intensive use to automate industrial sectional doors of 20m2 to 45m2.

Mechanical lock and end of run of absolute encoder with possibility of rapid ground regulation.

Sliding engine BFT "DEIMOS AC' electro-mechanical 230Vac for residential households up to 600/800 KG with electro-mechanical end of run.

The "DEIMOS AC" operators are ideal for motorizing residential doors with a speed of 9 m/min, they are easy to install thanks to their programming by trimmer and DIP switch. The end of the race is electromechanical.

KIT Sliding engine BFT "DEIMOS AC' electro-mechanical 230Vac for residential households up to 600/800 KG with electro-mechanical end of run.

The "DEIMOS AC" operators are ideal for motorizing residential doors with a speed of 9 m/min, they are easy to install thanks to their programming by trimmer and DIP switch. The end of the race is electromechanical.

Sliding engine BFT "DEIMOS ULTRA BT A" 24V electromechanical for charges of up to 400/600 KG with intensive use and magnetic run ends.

KIT Sliding engine BFT "DEIMOS ULTRA BT A" 24V electromechanical for charges of up to 400/600 KG with intensive use and magnetic run ends.

Wireless keyboard BFT "Q.BO TOUCH' digital membrane 433 MHz with variable code.

Compatible with all power plants with built-in or external receivers from the manufacturer BFT.

KIT Electromechanical engines BFT "ATHOS AC A" Irreversible 230V for residential swivels up to 700 kg in weight and 4 metres in length.

High speed motor BFT "ICARO VELOCE SMART AC A' 230V for sliding doors of very heavy use up to 1000 and 2000 kg.

Range of buried operators BFT SUB for residential and community cancellations.

Engine BFT E5 BT 24V electromechanical door for pedestrians and vehicles for residential and community use, designed to be installed on small pillars and columns.

Operating with end of career is regulated by a absolute encoder.

Sliding engine BFT SP3500 with 400V three-phase power supply for industrial doors up to 3500 kg of large size that require power and endurance.

KIT articulated engines BFT "VIRGO SMART BT A' residential hinged doors up to 2 metres or up to 200 kg. The main actuator incorporates a manoeuvre box with a 433 MHz receiver.

Residential articulated arm electromechanical operators for swinging cantilever blades up to 2 m and not exceeding 200 kg. Ideal for any installation requirement, allows you to easily solve problems related to large pillars thanks to the lever system. What. Control unit, control switch and mechanical stop blocks integrated in the operator.

Operator BFT LUX MB hydraulic at 230V other, not further worked than hot-rolled up to 300 kg in weight and 2’3 m in length. Useful range of 270 mm, maximum angle of 123o, hydraulic lock on closing and triangular key unlocking. Manoeuvre time is 23s. Power absorbed 250W.

Full range of highly intensive use oleodynamic pistons, suitable for any type of application: residential, industrial or community. Compact and robust, they can automate swinging cantilever blades up to 2.3 metres wide and weighing up to 300 kg.

KIT irreversible electromechanical operators of 24V for residential or community cancellations magnetic race finals, slowing and ftraction and impulse force of 2000 N.

Electromechanical engine BFT 24V 'PHOBOS BT A25' for swing doors up to 400 kg and 2,5 m or 'PHOBOS BT A40' up to 500 kg and 4 m.

Complete range of electro-mechanical pistons for residential use, suitable for swinging canopies up to 4 metres wide and weighing up to 500 kg.

Recognition of obstacles: the D-Track torque management and control system ensures maximum safety for persons and property and facilitates system certification.

Electromechanical operator BFT ARGO 24 V for sectional garage doors attack axis industrial and commercial sphere.

The robust mechanical structure and microprocessor technology of the control center allow for a intensive use of the operator and ensure maximum reliability over time.

The control system of the pair D-Track and the absolute encoder ensures high accuracy in movement control of the leaf and detection of obstacles.

24V electromechanical motor for tilting doors two-leaf BFT PHEBE BT A U C with integrated picture for tilting garage doors with Maximum surface 8 m² and intensive use with decreased speed.

Maneuver time 17-20 s, IP20 and End of Electromechanical Race. Control Central Built-in with D-Track

Folding manual pylon BFT "RANCH R" with a stem 114 mm in diameter and 625 mm high.

The universal receiver BFT Clonix 2E, you can connect any manoeuvring box on the market that has a voltage output of 12/24VAC/DC.

This receiver card has two channels for pulsing two actuators or electronic devices.

It has capacity for 128 additional transmitters in auto coding the working frequency is 433.92MHz

External receiver BFT "CLONIX 2E AC U-LINK 230' with built-in receiver 433 MHz, compatible with the U-LINK protocol (equipped with 3 connecting slots). The Receiver is powered at 230Vac and has a memory capacity of 2048 users.

Receiver BFT "CLONIX 4 RTE' 230V RollingCode of four channels at 433 MHz.

Receiving card BFT This is CLONIX 2 RollingCode 433 MHz.

Two-channel receiver with evolution code 433 MHz with capacity for 128 transmitters.

The power is 24Vac through the maneuver box.

Hydraulic oil of the brand BFT for tilting and swinging motors. Pack size of 2 litres.

SUB D40X25 P994.

Trailer motor sectional BFT TIR, EOS120 and BOTTICELLI.

Reducing motor shaft sliding BFT LET'S GO

Internal nylon pinion z30 engines BFT Lem / deimos.

Sliding motor plastic housing BFT Ares.

Back cover BFT Kustos

Wiring cap BFT Kustos

Triangular Key Unlock BFT LLS length 52mm.

Rear Cover Set Unlock BFT PHOBOS AC which includes a light bulb and keys.