List of products by brand BFT

High speed motor BFT "ICARO VELOCE SMART AC A' 230V for sliding doors of very heavy use up to 1000 and 2000 kg.

Range of buried operators BFT SUB for residential and community cancellations.

Engine BFT E5 BT 24V electromechanical door for pedestrians and vehicles for residential and community use, designed to be installed on small pillars and columns.

Operating with end of career is regulated by a absolute encoder.

Sliding engine BFT SP3500 with 400V three-phase power supply for industrial doors up to 3500 kg of large size that require power and endurance.

KIT articulated engines BFT "VIRGO SMART BT A' residential hinged doors up to 2 metres or up to 200 kg. The main actuator incorporates a manoeuvre box with a 433 MHz receiver.

Residential articulated arm electromechanical operators for swinging cantilever blades up to 2 m and not exceeding 200 kg. Ideal for any installation requirement, allows you to easily solve problems related to large pillars thanks to the lever system. What. Control unit, control switch and mechanical stop blocks integrated in the operator.

Operator BFT LUX MB hydraulic at 230V other, not further worked than hot-rolled up to 300 kg in weight and 2’3 m in length. Useful range of 270 mm, maximum angle of 123o, hydraulic lock on closing and triangular key unlocking. Manoeuvre time is 23s. Power absorbed 250W.

Full range of highly intensive use oleodynamic pistons, suitable for any type of application: residential, industrial or community. Compact and robust, they can automate swinging cantilever blades up to 2.3 metres wide and weighing up to 300 kg.

KIT irreversible electromechanical operators of 24V for residential or community cancellations magnetic race finals, slowing and ftraction and impulse force of 2000 N.

Electromechanical operator BFT ARGO 24 V for sectional garage doors attack axis industrial and commercial sphere.

The robust mechanical structure and microprocessor technology of the control center allow for a intensive use of the operator and ensure maximum reliability over time.

The control system of the pair D-Track and the absolute encoder ensures high accuracy in movement control of the leaf and detection of obstacles.

24V electromechanical motor for tilting doors two-leaf BFT PHEBE BT A U C with integrated picture for tilting garage doors with Maximum surface 8 m² and intensive use with decreased speed.

Maneuver time 17-20 s, IP20 and End of Electromechanical Race. Control Central Built-in with D-Track

KIT engine DEIMOS BT A400, operator for sliding doors of up to 400 kg. What. Blade speed is 12 m/min. End of the electromechanical race.

KIT electric motor for residential use, BFT model"PHEBE BT A U C" for automating swing doors of up to 8m2.

Electromechanical operator for residential use to automate tilting garage doors.

The integrated control centre, allows the operation of a second engine for large doors or with an integrated pedestrian door. For tilting doors up to 10m2 with installation of two motors.

In addition, microprocessor technology allows the torque of the motors to be controlled with maximum precision and complete safety.

Range of 24 V operators for heavy duty sliding doors with blades up to 1500 kg. What. Magnetic race terminals and command centers compatible with the U-link communication protocol.

Electromechanical engine BFT BOTTICELLI SMART BT A for intensive or very intensive use, designed to automate sectional garage doors.

It has a very compact design, suitable for installation anywhere, thanks to the wide range of chain rails available in various lengths.

The control centre and the end of run with encoder and mechanical cap are incorporated, respectively, on the operator and the guide.

Electromechanical barrier BFT Semi-intensive MOOVI30 with 3M rectangular mast, Compact suitable for delimiting private areas, parking and exclusively vehicular access accesses.

The barrier is supplied in color gray ral 7015 and has a 3300mm mast with a useful step of 3000mm with a 4.0 sec opening time. Reaction to the impact by sensitive bar. Central with built-in viewfinder.

Pair of self-aligning photocells BFT GIVE ME A 15, 24Vac power and 30m range.

For use in the manufacture of motor vehicles, designed to offer a high level of flexibility of installation thanks to their compact size, the possibility of adjusting the head 90° horizontally, left and right (180° total), and a wide input range of power supply 12-33 V AC and 15-35 V DC. What. Nominal range of 20 meters.

Flashing light without built-in antenna for motors with 24 V power supply.

The flashing signal light for automatic cancellation, RADIUS LED of BFT, 24 V without built-in receiving antenna. Thanks to LED technology, energy consumption is reduced by approximately 80% compared to models with traditional incandescent bulbs, while the product life is extended. Possibility to install on a surface (such as a pillar or column) or on the wall using the special accessory. Grade of protection IP44.

Wireless keyboard BFT "Q.BO TOUCH' digital membrane 433 MHz with variable code.

Compatible with all power plants with built-in or external receivers from the manufacturer BFT.

Folding manual pylon BFT "RANCH R" with a stem 114 mm in diameter and 625 mm high.

The universal receiver BFT Clonix 2E, you can connect any manoeuvring box on the market that has a voltage output of 12/24VAC/DC.

This receiver card has two channels for pulsing two actuators or electronic devices.

It has capacity for 128 additional transmitters in auto coding the working frequency is 433.92MHz

External receiver BFT "CLONIX 2E AC U-LINK 230' with built-in receiver 433 MHz, compatible with the U-LINK protocol (equipped with 3 connecting slots). The Receiver is powered at 230Vac and has a memory capacity of 2048 users.

Receiver BFT "CLONIX 4 RTE' 230V RollingCode of four channels at 433 MHz.

Receiving card BFT This is CLONIX 2 RollingCode 433 MHz.

Two-channel receiver with evolution code 433 MHz with capacity for 128 transmitters.

The power is 24Vac through the maneuver box.

Hydraulic oil of the brand BFT for tilting and swinging motors. Pack size of 2 litres.

SUB D40X25 P994.

Trailer motor sectional BFT TIR, EOS120 and BOTTICELLI.

Reducing motor shaft sliding BFT LET'S GO

Internal nylon pinion z30 engines BFT Lem / deimos.

Sliding motor plastic housing BFT Ares.

Back cover BFT Kustos

Wiring cap BFT Kustos

Triangular Key Unlock BFT LLS length 52mm.

Rear Cover Set Unlock BFT PHOBOS AC which includes a light bulb and keys.

KIT Strap BFT ARGO T2.5 - 245 - 98 teeth (2 UNITS)

Longitude 4mm.

Caps BFT CPS heavy-duty SUB cement welding case I099415 2600635.

Pack with 2 units.

Magnetic career endings BFT WE'RE GOING TO ULTRA BT A400-600.

Set of 2 unid magnets for sliding motor BFT We went to ULTRA BT A400 and we went to ULTRA BT A600.

Internal reduction crown BFT I100021 for PHEBE and ELI motors.

Internal gear crown reduction BFT Phobos & Kustos.

Original replacement BFT I200003 10001. Complete gearmotor compatible with slide automatisms BFT Deimo BT A400 and Deimos BT A400 Ultra. Direct substitution and guaranteed by manufacturer.

Battery kit with integrated charger BFT BAT-associated emission levels for emissions from combustion plants.

The quick and easy-connect battery backup kit allows the operator to work when the electrical current at 230V is lost. The 24V battery backup system can be installed in the motors BFT in the case of products of the series DEIMOS BT A, DEIMOS ULTRA, ARES BT A, ARES ULTRA.

The charger will be responsible for recharging the batteries when they lose their charging capacity.

Motor gearbox BFT IT'S CALLED TIZIANO B GDA 260 S01.

Electronic plate BFT "VENERE M B GDA' ideal for use as a replacement for the operator TIZIANO B GDA IT 'S 24V .

Electronic plate BFT SHYRA for sliding engines "WE AC A".

Plastic cover for BFT DEIMOS sliding gate motor (old model).

Round unlock BFT LEM, COMPAT AND DEIMOS.

Round unlock for sliding doors BFTIT'S CALLED LEM, COMPAT, DEIMOS. These controllers exist in 2 different colors, blue (usually for DEIMOS) and black (usually for LEM). The blue knob and the black knob are exactly the same.

Original spare engine for operator BFT THE EOS 120. This spare is completed as shown in the figure and can only be used by the operator BFT IT'S 120.

Kit Transmission system BFT THE NUMBER OF BOTTLES IS 850-1250.

Electronic plate BFT Vega 24V compatible engines BFT Phebe bt a u.

The plate BFT Vega is compatible with variants BT A U, BT A U IP44, BT A U C Both for one and two electromechanical operators of 24V.