List of products by brand V2

KIT Closing caps + cable insertion and rubber resistance V2.

Of a thickness of V2 which prevents pedestrians from catching their fingers on the hinge edge.

V2 WES is the system for radio control of safety bands, which will allow us to install the anti-crush rubber wirelessly thanks to the radio frequency transmitter-receiver.

LED signalling lamp V2 BLINKO multi voltage from 24 to 230 V.

Parts and accessories of machinery V2 S.H.I.E.L.D.-180's outer orientation and sync.

Surface-mounted photocells V2 DFN to embed auto-aligned and synchronized.

V2 WES Sensor is the Emisor used for radio control of safety bands, which will allow us to install the anti-crush rubber wirelessly thanks to the radio frequency transmitter-receiver.

It is necessary from the Base (Receiver) to be able to function. We have the Base + Sensor Kit.

V2 WES Sensor is the Emisor used for radio control of safety bands, which will allow us to install the anti-crush rubber wirelessly thanks to the radio frequency transmitter-receiver.

It is necessary from the Base (Receiver) to be able to function. We have the Base + Sensor Kit.

Unlock key V2 It's called Calypso.

Unlock key V2 It's called Calypso.

Table of manoeuvres V2 AYROSS PD19 230V plate, ideal for use as a spare in the AYROSS sliding motor.

The programming of parameters and configurations is done via the digital screen. The dashboard incorporates NO receiver, but is compatible with MR2 plug-in receivers.

Table of manoeuvres V2 CITY5 230V digital for the management of a traffic light installed near a vehicle crossing with a two-way direction of travel.

Read end run magnetic motor slide V2 ALFARIS (1 piece).

Transformer motor sliding V2 TORQ500D 24V 300W.

In the case of vehicles of categories M1 and N2 for a single leaf and for running ones.

Digital control panel 230V with encoder V2 CITY1-EVO for one- or two-leaf clover and slippers.

Table of manoeuvres V2 CITY9 an analogue 230 V for sliding doors.

" TABLE CITY9 HAS BEEN REPLACED BY NEW FLEXY2 MODEL FULLY COMPATIBLE "

Digital manoeuvring chart V2 CITY2+ 230 V for sliding doors and doors equipped with two 24 V direct current motors.

Analogue maneuvering chart V2 CITY11 230 V for swing lamps (one and two sheets).

Table of manoeuvres V2 EASY-TOP digital 230 V for rolling shutters.

Table of manoeuvres V2 EASY-LUX for rolling shutters with courtesy led light and buttons.

Table of manoeuvres V2 EASY-BASIC an analogue 230V with built-in receiver for roller shutters.

Table of manoeuvres V2 EASY1 230V analogue for blinds, blinds and awnings with built-in receiver 433.92 MHz.

Table of manoeuvres V2 EASY2 230V analogue for roller blinds with courtesy light and automatic closure.

Table of manoeuvres V2 "FLEXY' analogue 230V for sliding and swinging doors.

Replacement of sectional motor chain tensor V2 THE JEDI.

Replacement plate V2 PD13 for ALFARISS sliding engines, with programming display.

Electronic plate "PD14" for use as spare parts in sliding motors V2 OTHER IT 'S 24V .

The PD14 is equipped with a display that allows, in addition to easy programming, the constant visualization of the status of the entries; in addition, the structure with menus allows a simple programming of working times and operating logic.

Fast coupling clutch V2 In the case of engines with a rated torque of not more than 20 Nm (for LEX, LEX-RM, LEX-FE, LEX-RFE).

Vibration anemometric sensor, whether or not combined with other instruments V2 SYROCO-RS, system by radio (434.15 MHz).

Tube motor V2 LEX Final Race Mechanical for household blinds with a diameter of Ø45 designed to power blinds and roller blinds with tubing from 52 mm to 70 mm.

The operator is powered at 230Vac and has a diameter of 45mm. It has a mechanical manual end run with progressive screw regulation.

Anemometer with sun and temperature sensor V2 TYPHOON rADIO signal and powered by solar cells, for tubular blinds and awnings.

Anemometer with sun and temperature sensor V2 Hurricane-RS radio signal, for tubular blinds and awnings.

Cable-based signal anemometer V2 MISTRAL for automatic tubular blinds or awnings.

Anemometer with sun and temperature sensor V2 Signal hurricane by cable, for tubular blinds and awnings.

Other, of circular cross-section V2 AGON for revolving doors with 76 axles and up to 360 kg with electro-brake. What. Motor for spring-loaded industrial revolving doors, shaft 76 mm in diameter, lifting capacity up to 360 kg and crown 240.

Other, of circular cross-section V2 AGON for revolving doors with axle 60 and up to 280 kg with electro-brake. What. Motor for spring-loaded industrial revolving doors, axle 60 mm in diameter, lifting capacity up to 280 kg and crown 200/220.

Emergency battery with built-in battery charge for Barrier V2 NOUR.

Barrier of passage V2 24V NUUR with fast opening for residential and public accesses up to 4 or 6 metres long.

Fixed support Barrier of passage V2 NOUR.

Electromechanical and automatic barrier V2 Quickly opening NIUBA in a 230V (non-intensive) or 24V (intensive) version for residential and collective access with a 12-foot pole.

Additional accessories to the electromechanical barrier V2 I'M GOING IN.

Electromechanical and automatic barrier V2 Quickly opening NIUBA in a 230V (non-intensive) or 24V (intensive) version for residential and collective access with a 20-foot pole.

KIT Electromechanical engines V2 CALYPSO irreversible at 230 V for 2 residential swing doors for leaves up to 2,5 metres.

The KIT includes:: digital or analogue control panel for 2 motors at 230 V, with plug-in receiver and 2 bi-channel emitters at 433 MHz

KIT 1 Electromechanical engine arm V2 CALYPSO irreversible at 230 V for residential sliding doors for sheets up to 2,5 m (CALYPSO400), 3 m (CALYPSO500), and 4 m (CALYPSO600).

The KIT includes:: digital control panel for 1 motor at 230V, with plug-in receiver and 2 bi-channel emitters at 433 MHz

Inverter board V2 I'M NOT SURE.

End-of-race supports or blades V2 ALFARISS, PLEASE.