KIT engine V2 TORQ 24V for sliding doors up to 500 kg with magnetic running ends and digital manoeuvring board with encoder.

TECHNICAL CHARACTERISTICS

• Maximum weight of the door: 500 kg
• Power supply: 230 - 50 V / Hz
• Maximum power: 300 W
• Absorption with load: 2 A
• Speed: 0,28 rpm
• Maximum thrust: 600 N
• Working cycle: 90%
• This Regulation shall be binding in its entirety and directly applicable in all Member States
• Operating temperature: -20 ÷ +55 °C
• Weight: 9 g
• Protection degree: IP44
• Maximum load of accessories at 24 VAC: 7 W

FUNCTIONS

• Precise and safe operation with encoder

• Detecting obstacles

• Programmable acceleration and deceleration

• Self-learning of opening and closing times

• Operation in the absence of electricity using battery 161237

• Solar powered operation using the ECO-LOGIC system

• Synchronous operation of two engines using the SYNCRO module

• Magnetic endpoints accurate and reliable in time

CONTROL UNIT

• Programming by three buttons and screen
• Connector for the MR2 modular radio receiver
• 2 entries for photocells with self-test function
• 2 inserts for mechanical or resistive safety belts
• Output for 24V signalling lamp with or without intermittent
• Out for courtesy light
• Energy Saving function to reduce standby consumption
• Self-learning function of working time and obstacle detection
• Operating cycle counter with maintenance signalling
• Softly I stop the closing leaves
• Soft start of the door on opening (programmable start ramp)
• Display of status of entries by screen

THE KIT CONTAINS:

• TORQ500D-24V engine with built-in frame
• MR2 receiver at 433,92 MHz
• 2 unid 2 channel PHOX transmitter at 433.92 MHz
• SENSIVE photocell with 180o surface
• 4 metres four anchor nylon zipper

MANUALS

Instruction manual V2 TORQ