List of products by brand Motorline

I command Motorline MX95N 1 channel with an innovative and functional design, with support included.

MC410 is a three-phase electronic station (400V 3 phases) developed to equip the Stark engines (sliding gate) and kvm115 (sectional gates) of the brand Motorline.

This plant allows more precise operation, which translates into a saving of all the mechanical components of the gate and automation, as well as in a Protection against exponential increase in stream At the time of starting the AC engines.

Electromechanical bollard Motorline in stainless steel 304, for traffic control, Adequate to prevent the traffic ticket and reserve parking. Opening speed of 0.06 m / s.

Its integral construction in steel-stainless steel and PVC does it in a retractable, appropriate anti-vandalic bollard to be buried on the ground.

Box button pusher with 3 buttons (Open-Close-Stop)with dimensions of 72x150x64 mm. Protected by IP65.

Column support for photocells and complementary accessories Motorline.

Safety photocell Motorline MF40 with orientation sensor up to 180°.

✓ Integrated Amber or RGB flashlight lamp

✓ Exceptional detection range up to 40m

✓ Flexibility of installation without cables

✓ Autonomy and efficiency with solar panel and rechargeable battery

Microwave radar ideal for doors large and high ceiling locations, which can be installed up to 7 m high. Account with technology detection able to differentiate people and vehicles, reducing unwanted openings, thus saving energy loss.

Charger kit with 2 batteries 12Vdc/2.2Ah with case for 24V motors

Until completed in aluminum swinging motor Motorline Jag400.

Engine Motorline KVM115 is a tensile automatism to the axis, for automation of Industrial sectional doors up to 60m², with the possibility of horizontal or vertical application. Ease of installation, configuration and maintenance, makes it ideal for all types of sectional doors.

* Does not include MC410KVM center

Articulated arm motor Motorline Telica 230V for swing doors with reduced space For 1 sheet up to 2.5 meters.

Accessory Motorline MTS041 To adapt crank MTS04 to the engine.

Accessory Motorline Mts01 To adapt crank MTS04 to the engine.

Central Motorline MC70 230Vac for TUB and Rolling motors up to 500W.

Central Motorline MC4 EVO developed for TUB and ROLLING roller motors up to 750W, with technology to be powered from 100Vac to 230Vac.

Its small size allows it to be installed in smaller spaces and with screwless connectors to increase speed and ease of connection.

Issuer Motorline falk model with RollingCode coding system at 433,92 MHz for receivers Motorline or RollingCode open source receivers.

Sectional engine Motorline ROSSO PRO Brushless 24Vdc for sectional gates up to 18m2 with option to integrate motion and humidity sensors. You can also be integrated WiFi thanks to the MCONNECT LINK device.

Roof motor Motorline ROSSO EVO 600N for sectional doors up to 10m2. What. It has a modern and innovative design, standing out in any environment.

Roof motor Motorline ROSSO EVO 1200N for sectional doors up to 18m2. What. It has a modern and innovative design, standing out in any environment.

Roof motor Motorline ROSSO EVO 1000N for sectional doors up to 15m2. What. It has a modern and innovative design, standing out in any environment.

Control centre Motorline MC60KVM with output for electro lock EF25.

MCONNECT LINK is a tool for installers that allows us to configure all the parameters of your power plant Motorline through Wi-Fi either in person or remotely.

Table of manoeuvres Motorline MC50KVM single-phase 230V with up/down/stop pusher developed for the automation of sliding, tilting, sectional and passage barriers.

Central Motorline MC410 developed to work with 400Vac three-phase engines up to 1500W. Ideal for application in engines STARK, KVM115 and KVM2020.

Central Motorline MC76 for roller blinds with buttons Up, Down, Pair.

The MC76 plant has been designed to be flexible, safe and efficient automation of roller shutters, gates and garage doors.

With 100V-240Vac universal power supply, the MC76 is a versatile solution that adapts to a wide variety of needs, from small businesses to large industrial facilities.

Electronic central Motorline MC160 230Vac to control firewall curtains with 24Vdc engines up to 300W of power.

When the unexpected happens, security cannot fail. La central MC160 was developed to control firewalls, ensuring protection in fire situations.

Support 24Vdc motors up to 300W power, guarantees safe and controlled movement of curtains in emergency applications.

The MC415 electronic power plant with built-in investor has been specially designed for Automate quick, sectional and sliding doors.

Combine functionality with a Intuitive Touch Interface that simplifies the configuration, diagnosis and monitoring of the system.

Electronic Motorline Mc93-300 control for sectional gates, equipped with Interactive touch screen To make configurations, diagnostics and monitor the system.

The control plant Communicates with the engine through an RJ45 cable, which provides 24VDC and integrates two RS485 communications for engine management.

The central Motorline Mc62 It is an advanced electronic center For automation of swing doors for 1 or 2 motors in 24V, Integrates Radio Receiver at 433.92 MHz and allows you to control up to two 120W engines each.

Designed to offer security and reliability, account with effort detection to avoid damage, protection against reverse battery polarity and anti-overheating technology. Its interface with homogeneous menu and Display facilitates programming, and allows you to configure parameters as the slowdown, the Sensitivity of force, "pedestrian" closure modes, pause times, delay in opening / closing and "follow-me": automatic closure 5 s after detecting a user.

Accessory allowing 180° opening of an engine Motorline SUBWING.

Center axle coil motor Motorline model ROLLING SP with a lifting capacity of up to 160 kg with electro-brake, for a pulley of 200 mm and an axle of 60 mm.

KIT Motor coil centre axle Motorline model ROLLING SP with a lifting capacity of up to 160 kg with electro-brake, for a pulley of 200 mm and an axle of 60 mm.

Bi-motor coil centre axle of Motorline model ROLLING SP with a lifting capacity of up to 360 kg with electro-brake, for 240 mm pulley and 76 mm axle.

Engine Motorline KVM25 is a axle traction automation, for automation of other, of circular cross-section. What. It is ideal for all types of vertical opening doors due to its ease of installation, configuration and maintenance.

Engine Motorline KVM105 is a drive shaft automatic, for automation of industrial sectional doors of up to 35m2, with the possibility of horizontal or vertical application. The ease of installation, configuration and maintenance makes it ideal for all types of sectional doors.

The new FORT engine of Motorline it is an automation that can be applied in doors up to 400kg. What. It is a motor in the form of a column with a built-in RGB flashlight at its top, informing the status of the door maneuver.

Complete kit of engine Motorline, with an innovative and modern design, developed for automation of other, not further worked than hot-rolled, hot-drawn or extruded. What. This engine is irreversible and possesses adjustable running ends at opening and closing. What. Available in 230Vac and 24Vdc.

JAG engine kit of Motorline electrical engineer for use in the manufacture of products falling within heading 8528 [1] up to 4 metres/leaf (JAG400) and for doors up to 6 m/sheet (JAG600). Irreversible motor incorporating electric running ends in opening and closing.

Motorline KVM | Tensile motor with brushless technology

The range KVM 300 Series automates Sectional gates of up to 40 m², combining robustness, security and silent performance.

Available in KVM305 and KVM310 versions (36V, compatible with backup batteries) and KVM315 (with high torque for heavy gates), it integrates a Brushless engine with absolute encoder, guaranteeing maximum precision and low need for maintenance.

Complete kit of engine Motorline, with an innovative and modern design, developed for automation of other, not further worked than hot-rolled, hot-drawn or extruded. What. This engine is irreversible and possesses adjustable running ends at opening and closing. What. Available in 230Vac and 24Vdc.

Sliding engine Motorline Manufacture from materials of any heading, except that of the product very heavy.

Developed and produced in Portugal, STARK is available in 3 versions, 4000Kg, 6000Kg and 8000Kg at 230Vac or 400Vac. What. More compact and modern, it also has quality mechanics, making it an elegant and reliable engine.

Engine Motorline KVM110 is a drive shaft automatic, for automation of industrial sectional doors up to 48m2, with the possibility of horizontal or vertical application. The ease of installation, configuration and maintenance makes it ideal for all types of sectional doors.

Engine Motorline KVM115 is an automatic axle traction, for automation of industrial sectional doors of up to 60 m2, with the possibility of horizontal or vertical application. The ease of installation, configuration and maintenance makes it ideal for all types of sectional doors.

Engine Motorline KVM2020 suitable for doors or bars of heavy metal or without spring clearance.

" The manufacturer has discontinued the KVM2020 model and offers us its new range ROLLING "

The engines of Motorline KVM205, KVM210 and KVM215 are three-phase three-axle traction motors powered at 230 V. With electronic end, for the automation of industrial sectional doors from 20m2 to 60m2, with possibility of horizontal or vertical application.

With a frequency converter system built into the power station, it enables smoother starts and stops and provides benefits such as: energy savings, process improvement and reduced mechanical maintenance.

KIT Engines buried Motorline "SUBWING' to automate swings up to 2.5 metres.

SUBWING has been developed to automate beating gates with blades up to 2.5m, available in 230Vac, or 24Vdc.

Discreet, it's buried beneath the base of the sheet, making it virtually invisible, without altering the appearance of the gate.

The construction of the outer case in galvanized steel provides great robustness and strength. With the possibility of applying mechanical caps on the automatic to limit opening and closing.

Engine axle traction Motorline ROLLING for retractable doors, robust and easy to install for retractable bars, with electro brake for shutter locking.