List of products by brand Motorline

Magnetic plastic contact for service door.

Curved arm Motorline reference ARC007 other, of circular cross-section type ROPER or not overflowing.

The curved arm is necessary for most Roper manufacturer swing doors.

Electronic switchboard Motorline for use in the manufacture of motor vehicles [1], capable of storing in memory 215 Rolling Code codes.

External unlocking for spring and sectional hinged doors (ROSSO EVO).

24V DC control panel for Motorline barriers with programming via display, built-in receiver, obstacle detection, limit switches, automatic route programming, soft stop time regulation, maximum consumption for 1A motors, lock management, 23 Rolling code memories 433.92Hz.

" THIS PRODUCT HAS BEEN REPLACED BY THE MC60 PLATE "

Central Motorline MC65 for motor blinds and awnings up to 500W with the possibility of working with BEWEATHER sensor, effort stop for canopy fabric adjustment and independent output for courtesy light.

Central Motorline MC60SC developed to work with 1 24Vdc motor, with maximum power of 120W each.

" THIS PRODUCT HAS BEEN REPLACED BY THE PLATE MC60 "

Electric locks Motorline EF25 exclusive to the KVM25 engine sectional door operating with MC60 switchboard.

The EF25 lock guarantees our safety by installing it on the side guide of the sectional door, preventing the door from being opened by force.

Motor for skylights Motorline MCBT50 ideal for powering windows for ambient air renewal or smoke extraction.

Motor chain Motorline IN THE CASE OF VEHICLES OF CATEGORIES M1 AND N1.

Engine Motorline MCBS80 designed to execute opening and closing of tilting windows, blinds and skylights.

Control of access Motorline MCA02 TCP/IP or WEB with software

Tube motor Motorline for domestic rolling shutters and curtains with an axis of 35 mm.

Engines designed for: motoring blinds and curtains, indoor or outdoor, allows the application of various accessories to work with all types of pipes.

Kit for industrial sectional doors for installation in places without side space.

Adaptive to THIS REGULATION SHALL BE BINDING IN ITS ENTIRETY AND DIRECTLY APPLICABLE IN ALL MEMBER STATES.

Electronic switchboard Motorline MC50SC single-phase 230Vac sliding door, with built-in receiver, possibility to store in memory 99 Rolling Code total opening codes plus 99 pedestrian opening codes.

" THIS PRODUCT HAS BEEN REPLACED BY THE PLATE MC50 "

All barriers powered by 230Vac motor, the possibility of saving in memory 99 RollingCode codes of full opening with deceleration in closing and opening.

" THIS PRODUCT HAS BEEN REPLACED BY THE PLATE MC50 "

For the purposes of headings 8521 to 8528.

The holder is for a standard circular reflective retro-reflective mirror for any type of mark. The diameter is 85mm.

Box with 24 screws and 24 nylon zipper washers.

Accessory for placing the EF30 electric lock in an upright position for ground closure.

Central Motorline model MC41SP, 24Vdc for racing motors with end-of-run, automatic shut-off, speed reduction on opening and closing, built-in receiver with memory for 30 codes.

" This model has been replaced by the MC60SC "

Electronic control unit for 2 230 V motors, with built-in receiver Motorline MC2 in a large box for double-leaf swing doors.

A transmission enabling the parallel connection of MCBT50 engines for synchronous operation.

4V 150mA solar panel with rechargeable battery box powering the transmitter MX14.

Electromagnetic lock Motorline EF70 with a capacity of up to 70 kg at 12 Vdc to 24 Vdc power supply.

Clamp for guide of the ROSSO EVO with 350 mm

Extension of iron rod for ROSSO EVO (1m) + Chain