List of products by brand Motorline

Radar Motorline Small RAP50 microwave technology ideal for glass doors and pedestrians, which can be installed up to 4 m high.

Electric locks Motorline EF30 with button and bulb, and automatic operation providing greater security to the door.

The power source Motorline FAC5A with battery charger is ideal for installation in pedestrian doors, allows us to place electrical or magnetic locks as well as for connect an access control. What. It has a power supply capacity up to 5A and has a box with a stand to place a battery.

KIT engine Motorline BRAVO500 at 230Vac with oil and grease lubricated reducer for sliding doors up to 500kg and IP44 protection.

KIT engine Motorline SLIDE800A at 230V with oil and grease lubricated reducer for sliding doors up to 800kg semi-intensive use and IP44 protection.

KIT engines Motorline Electromechanical winch at 230Vac or 24Vdc for swing doors of 10 to 20 feet per sheet. It incorporates main, two controls and a security photocell.

KIT swinging motor Motorline LINCE for residential cancellations. What. Models of 230 Vc and 24 Vdc for running 300 mm, 400 mm, 600 mm

Plastic back cover Motorline KM25.

Replacement chain tensor for iron rail Motorline RED EVO.

Replacement rope unlock Motorline RED EVO.

Motor gearbox replacement Motorline RED EVO.

Telescopic masts barriers Motorline KBM6, KBM8 and KBM11

Replacement Motorline KBM6 - RGB board with LEDs.

Replacement Motorline KBM6 - Module 3 relays for the management of LED RGB lights

Mechanical lock or bolt for locking swing gates with two blades. What. It shall be applied in conjunction with an electric lock to ensure that the gate is locked. Possibility of application on the left or right (reversible).

A one-channel receiver operating in both mono-stable and bi-stable mode, capable of storing up to 500 12-bit or Rolling-Code codes.

It's only compatible with the controls Motorline model FALK and MX4SP.

The kit includes 2 units of the FALK emitter.

A one-channel receiver operating in both mono-stable and bi-stable mode, capable of storing up to 500 12-bit or Rolling-Code codes.

It's only compatible with the controls Motorline model FALK and MX4SP.

Tube motor Motorline 4545mm force 20Nm, 30Nm, 40Nm, 50Nm for curtain and roller shutters.

Engines designed for: motoring blinds and curtains, indoor or outdoor, allows the application of various accessories to work with all types of pipes.

For the purposes of this Regulation, the following definitions shall apply: Motorline model MF30 with a maximum range of up to 25 metres.

Twilight sensor to keep LEDs on pillars or barriers in low light environments.

The twilight sensor is compatible with all technology Motorline.

Charger kit with 2 batteries 12Vdc/2.2Ah with case for 24V motors

Power supply for 12Vdc devices, with a maximum power supply capacity up to 5A.

Magnetic plastic contact for service door.

Curved arm Motorline reference ARC007 other, of circular cross-section type ROPER or not overflowing.

The curved arm is necessary for most Roper manufacturer swing doors.

Electronic switchboard Motorline for use in the manufacture of motor vehicles [1], capable of storing in memory 215 Rolling Code codes.

Key selector Motorline SCMV150 contact start with 2 microphones and a european cylinder.

External unlocking for spring and sectional hinged doors (ROSSO EVO).

24V DC control panel for Motorline barriers with programming via display, built-in receiver, obstacle detection, limit switches, automatic route programming, soft stop time regulation, maximum consumption for 1A motors, lock management, 23 Rolling code memories 433.92Hz.

" THIS PRODUCT HAS BEEN REPLACED BY THE MC60 PLATE "

Fixed support for mast barriers Motorline

Mobile support for mast barriers Motorline

Mastiff with barrier skirt Motorline KBS5 - 5m

Central Motorline MC65 for motor blinds and awnings up to 500W with the possibility of working with BEWEATHER sensor, effort stop for canopy fabric adjustment and independent output for courtesy light.

Wireless keyboard Motorline 2 channel TEC1, aluminum for outdoor use.

Central Motorline MC60SC developed to work with 1 24Vdc motor, with maximum power of 120W each.

" THIS PRODUCT HAS BEEN REPLACED BY THE PLATE MC60 "

Electric locks Motorline EF25 exclusive to the KVM25 engine sectional door operating with MC60 switchboard.

The EF25 lock guarantees our safety by installing it on the side guide of the sectional door, preventing the door from being opened by force.

Motor for skylights Motorline MCBT50 ideal for powering windows for ambient air renewal or smoke extraction.

Motor for skylights Motorline MJ1 ideal for powering windows for ambient air renewal or smoke extraction.

Drive 230 Vac, 25W and 300 Nm, stroke of 240mm or 360mm.

Motor chain Motorline IN THE CASE OF VEHICLES OF CATEGORIES M1 AND N1.

Engine Motorline MCBS80 designed to execute opening and closing of tilting windows, blinds and skylights.

RFID proximity reader with independent access control, capable of adding up to 10000 users.

Ideal for outdoor use, with anti-passback and anti-vandalism function.

For the purposes of this Regulation, the following definitions shall apply: Motorline MB1 coded approach.

Requirements for the identification of the device Motorline For use with ML4S access control.

Control of access Motorline MCA02 TCP/IP or WEB with software

Tube motor Motorline for domestic rolling shutters and curtains with an axis of 35 mm.

Engines designed for: motoring blinds and curtains, indoor or outdoor, allows the application of various accessories to work with all types of pipes.

Kit for industrial sectional doors for installation in places without side space.

Adaptive to THIS REGULATION SHALL BE BINDING IN ITS ENTIRETY AND DIRECTLY APPLICABLE IN ALL MEMBER STATES.

Electronic switchboard Motorline MC50SC single-phase 230Vac sliding door, with built-in receiver, possibility to store in memory 99 Rolling Code total opening codes plus 99 pedestrian opening codes.

" THIS PRODUCT HAS BEEN REPLACED BY THE PLATE MC50 "

All barriers powered by 230Vac motor, the possibility of saving in memory 99 RollingCode codes of full opening with deceleration in closing and opening.

" THIS PRODUCT HAS BEEN REPLACED BY THE PLATE MC50 "

For the purposes of headings 8521 to 8528.

The holder is for a standard circular reflective retro-reflective mirror for any type of mark. The diameter is 85mm.